I'll be using the 5x5 for my photoperiods Everything is starting to pop out of the soil now. Waiting on 2 more to pop out and that will be all of them🤞👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Just started flower, put the light a bit higher cause she was quite bushy and wanted her to stretch a little more Fed her with the veg nutes one last time She's looking absolutely ready Defoliated and LST'ed again, should have done this in veg but she hadnt stretched enough yet

👽

Super pumped to try it out, reminds me of when I was a teenager. 🌱😎💨

Du un problem de ph dans les premiere semaine qui a retarder et ralenti la croissance , elle sen est plutot bien sorti. . Elle as bien su profiter de tout ses semaine et ses bien developper en floraison.

Semana del 9 al 15 de septiembre 2024. Las Positronics auto aun no Entran a Floración, y ya van bastante avanzadas, mientras las otras, unas van muy flacas y otras si van bastante gordillas.

Die Pflanze wurde Mitte letzter Woche an Tag 66 geerntet. Getrocknet wurden die Blüten 6 Tage lang bei einer Luftfeuchtigkeit von 53% bevor sie nun ins Glas kommen. Getrimmt wurde die Pflanze trocken.

The regular humidifier top up every 2-3days , so I have to run water distiller 2x per one refill which is pain 😂 , apart that nothing part sprouting some seeds for the SST , and the Super8 tea been brewing for over 2 weeks , should be readily available liquid feed hopefully , i use 600ml weekly , 3rd week this week and no stress so far , no deficiencies or toxicity .. probably gonna start feeding from week 4-5 see if there’s any difference . It’s all rocket science for me , custom soil blend from scratch, 80%coco coir brick, and using like 3-4 amends Overal , want to be as organic and as simple as possible

FastBuds White Widow auto 4th week of flowering completed 11th jan 2020 Well this plant is still the smelliest of all the testers Ive been growing it Reeks!! but in a good way 😝 Nothing else to report all my girls seem to be very content in their environment at the moment and are getting closer to the end every day . I'm supposed to be going away on leave next mont for 2-3 weeks and I'm hoping all of my flowering plants will be ready by then 😏

Total days above ground: 70 Total flower nights: 31 Vege growth stopped around FD25. Started feeding 1/2 strength fertilizer FD26 (last 6 irrigations including today). Excellent development across the canopy. Tried to get some pictures showing how the colas are stacking up along with a couple shots of terminal buds. Included some photos and videos of irrigation setup, drainage and other half of the tent setup that is not often visible in weekly updates. Also, a video showing the canopy with some grateful dead background music. Last week including progression pictures as they are full size. Well, I still don't like the structure, but this plant has really turned on the jets in mid flower. More bud sites than I expected but because I had to HST it, It is crowding AM3 and probably not helping the runt of the litter by doing so, lol. The smell on this plant is a mix of fuel and a hint of mint at one time, but the gas smell is overtaking it at this stage. The aroma is a big reason why i'll use it as a pollen-donator and hope that the lanky trait gets toned down with hybridization. My bets fem-seed outcome was two lanky plants and that most certainly got toned down in the offspring. I think it's related to too much inbreeding because of the much better structure found in the F1 offspring. Smell is starting to ratchet up. Bud sites are mostly formed at this point and we will see some noticable ripening by next week's update. Might see a hint of fattening calyxes in the bud pictures this week. 2026-2 starts in 8 days. Will have some Blue Cookies and Pineapple Express from MSNL running along side some Vanilla Creme Pie from HSC. Can't believe winter-2 is already starting. Time is flying by. Breeding cycle is doing well. Will update that when the pollen-receivers join the pollen-donator on a 12/12 light schedule. Side note -- looks like I avoided any issues from accidentally leaving port hole opened about 8 or 9 days ago. I have it marked in notes and will feel 100% confident 2-weeks out from the incident. So far, so good. The lung room is mostly dark and light would have to travel a difficult path to get in the tent, but still mildly concerned about it.

Week 9 has finished, she is pretty close to chop 👍🏾

Fantastic strain!

Bud sites everywhere now, I’m hoping these are gonna yield over 100grams to see me through this epidemic that we’re all going through right now. They’ve all been great genetics to run, I’ve learned a lot from these girls and realised just how nitrogen hungry they can be and also how cal mag is essential because coco seems to hold onto it if it’s not added in.

Start flushing them! Love the colours ✨😍

Super Fire looking buds 🔥

Eccoci nella 6ª settimana di fioritura 🤩💚 la Black Muffin di SweetSeeds 🐘💚 è quasi arrivata al suo massimo 🔝😍 È molto bella da vedere anche se ha mantenuto il suo colore verde! 😍 Il bud principale è cresciuto come una bestia come si vede in foto! 28.11.24 Ok!sono comparsi i primi peletti bianchi 🤩💚✨

I have now trimmed and hung the plant after 9 weeks of flowering

Final da 4° semana de floração Planta aparentemente saudável