I'm not adding no nuts since I make super soil however I'm adding an extra push for her now in flower just once a week using kalong bloom and kalong batboost (extract) she seems to love it,I didn't expect her to produce this beautiful violet nugs she's developing,let's see how beautiful she gets at the end,can't wait guys! 😍👀🌱

Que pasa familia, estamos de vuelta para actualizaros la 4 semana de floración, las flores van cogiendo forma , en esta variedad las flores Se ponen como pelotas de tenis. Todo va bien , ph controlado , humedad no aumenta por encima de 50%. Y asimilan genial todo el alimento aportado. Hemos hecho defoliación para dejar acceso a mas luz a la altura media de la planta.

Day 5 since time change to 12/12. Hey everyone ☺️. Finally the time has come :-) The lady moved into the flower tent on January 6th, 2021 😁. The day before, of course, a cutting was taken 👍. In the flowering tent, the distance between the plant and the lamp is 40 cm so that she can get used to the strength of the lamp. After 3-5 days I go down to 30 cm. This week it was watered twice with 1 l per plant. GHSC enhancers were added to one wash :-). Flower fertilizer will only be added in 12-16 days as soon as the first blossoms are there :-). Otherwise the tent was completely cleaned and the humidifier refilled. For the next few days I have filled fresh osmosis water in canisters again :-). Next week I will remove the bottom shoots so that the energy doesn't end up going into small popcorn buds 😉. There is nothing more to report this week and I wish you all a lot of fun with the update 😀. Stay healthy and let it grow 🙏🏻🍀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Mar 10th Week 13 All is well, plants are filling out nicely Mar 13th Fresh nutrients today Mar 15th Defoliation day hopefully this is the last time. Just taking off the major fan leaves

She's a mess! Her buds are sooo heavy, they are falling over. She suffered from nute lockout and ph issues, but I see her leaves greening up again, so maybe she's getting better. I don't know what it means, but her stems are purple. She also has some foxtailing that I think the environment contributed to. It gets very hot in my make shift tent. These are her last weeks. No more nutes, just water from now on. I will be harvesting her on Sunday due to personal time constraints. I hope she's good! Thanks for stopping by and stay tuned.

War ein haze pheno

Zum ersten Mal habe ich mich im LST versucht. Denke dass ich darin noch etwas zu grob bin. Für konstruktive Kommentare, Kritik und Verbesserungsvorschläge bin ich immer offen und dankbar :)

my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 56 days and flowering stage was 75 days total (harvested tops at day 64th) the total weight of dry buds was : (plant #1 & #3 top buds 56 G + lower buds 22 G ) 78 G + (plant #2 top buds 47 G + lower buds 18 G ) 55 G + (plant #4 top buds 120 G + lower buds 67 G ) 187 G = 367 G

Buds are starting to show their shine!!! Becoming more pungent everyday

I stretched the purple punch a bit further than usual, but love plant Strong stems so train early., Next grow I will actively lollipop a bit more but overall I'm happy.. Very consistent nugs

Overall great product. Easy growing. Good looking. Smells great. Nothing but the best from Humboldt!

Saudações. Menina está bem, botões formados e lindos 🤩. Agora esperar e torcer 🤞, para que engordam muito e bem. Ela está ficar com uns tons de roxo 🤩, bem tenho borrifando ela com água de torneira, que tem um ph alto, o alto ph e sua genética deve ficar roxa no final, esperamos para ver. Bem tenho borrifando ela por ter ácaros aranha na sala, tenho mantido praga controlada. Mas ácaros aranha se reproduzem muito rápido, nunca se sabe bem dia de amanhã. Bem por agora tudo controlado, menina não foi afetada. Espero manter limpa até ao fim, 🤞 torcer para que tudo corra bem. Visite Dutch Passion conheça suas novidades e promoções.

5 day flowering , deleted big leaves

Aug 23: Tropicana Cookies Fast Flowering is. cruising along toward the finish. Nice and symmetric with 16 colas all forming a nice long stick of buds. Should be a really good yield off of this one. No pue colour uet but I’m sure it’s coming soon. Aug 27: hit 32 C today and will be hot for another five days or so. With this late heat wave I’ve upped the daily water volume to about 9 L a day over three waterings. Still adding potassium silicate once a day and always adjusting pH with vinegar and then a squirt of Dr Bronners Peppermint Soap as a wetting agent. Smell of peppermint also repels pests, supposedly.

Hola con esta semana ya quedamos al dia con el seguimiento ya que estaba atrasado en el tiempo. Se nota una producción de resina notable en esta genética que nos ha gustado mucho por su olor y estructura de las plantas . hemos creado un video por cada una de las 14 plantas del seguimiento, hay varias muy llamativas que están "pre-seleccionadas" para mantener a futuro, el olor que se llega a sentir es muy florar y dulce, si tienen alguna pregunta no duden en preguntar saludos. Hello with this week we are already up to date with the follow-up since I was late in time. There is a remarkable resin production in this genetics that we liked a lot for its smell and structure of plants. We have created a video for each of the 14 floors of the follow-up, there are several very striking that are "pre-selected" to keep in the future, the smell you get to feel is very flowery and sweet, if you have any questions do not hesitate to Ask greetings.

The Tropicana Cookies from fast buds is doing good after a little accident with her pot falling over an roughing her up a little hoping she didn't get effected to much other then that she's been growing great under the fold 6 looking nice an healthy

Started flushing the two on the left side of the tent today with advanced nutrients flawless finish 19th Nov.....the other two on the right have had just overdrive today start flushing them within the next couple days, the middle baxk plant is just doing its own slow thing 😅... smell is unreal 🤤

.

She is a Beauty!! Exotic Dream!! Another week or two

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.