Likes
Comments
Share
hello guys this week the explosion continues i spent the light at 24 h i think another two weeks is the minimum i doubled the molasses i need to oxygenate the room a lot these monsters are intertwining with each other in an incredible way i didn't imagine they could pull up so much it seems the height has been limited by the time I can't imagine these specimens outdoors, I will introduce air with a larger fan I have totally defoliated the highest one hoping it will produce more on the parts close to the light but I am wary of this. all the others seem to me in great shape but hopefully ... in something better, unfortunately I had no way to prepare sea of ​​green in any other way and I gave this tent a chance, I increased the molasses by double but I always divide in four five waterings at the end of the evening I rinse only with water. I enjoyed pruning this giant bonsai but I gained a lot of air hopefully all goes well
Likes
244
Share
one more week up we go and Defoliation time as come and i want to share with you a technique that I've found to be really helpful for improving the quality and yield of my plants: defoliation. Now, I know that the idea of removing some of your plant's leaves might sound a bit counterintuitive or even scary, but hear me out. Defoliation can actually be a wonderful way to show your plants some love and help them reach their full potential. One of the main benefits of defoliation is that it can improve the airflow and light penetration throughout your plant. By removing some of the larger fan leaves that can block light and air circulation, you can ensure that your plant is getting all the nutrients and energy it needs to thrive. Plus, defoliation can help your plant produce bigger and denser buds. By redirecting its energy towards bud production instead of leaf growth, you can achieve a more bountiful harvest with higher-quality buds that are rich in cannabinoids and terpenes. And, as an added bonus, defoliation can even help to prevent the growth of harmful pathogens like mold, which can thrive in warm, humid environments. By increasing air circulation through your plant, defoliation can help to reduce the humidity levels in your grow space and keep your plants healthy and happy. So, if you're looking for a way to give your Girls some extra love and attention, I highly recommend trying out defoliation. With a gentle touch and some careful pruning, you can help your plants reach their full potential and enjoy a bountiful harvest of beautiful, high-quality buds. Oh, and she loved the leaves falling off, haha! She took it in stride, as if it were no big deal. Just love how this one meditates with me all the time , Big Namaste to her and to the creators of this madame Le Freak As always thank you all for stopping by , for the love and for it all, i fell blessed to have you all with me for one more love journey, and a different one form the rest i did so far <3 <3 <3 Thank you Thank you Thank you , you guys are great and have been amazing , thank you for everything <3<3<3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove
 With true love comes happiness , Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 <3 <3 <3 Growers love to you all <3 <3 <3
Likes
17
Share
@SkyWhal3
Follow
The total height at harvest was 42". Measured from the top of the net pot to the tip of the cola...Almost too tall for the tent, when you add the light, distance and air filter. The wet/trimmed weight was 409g for one plant. Took about .3m2 of grow space. Super resistant to things like mites and changes in environmental conditions, and nutrient levels. Be careful at end of harvest, the buds are so fat, wet, and dense that mold/rot can quickly be a thing if not managed with humidity and airflow. I opened up the nodes a bit to help with air flow. The diameter of each main cola was 4" at time of harvest. I moved my fans around three times a day to make sure each side had some direct air for a few hours each day and kept RH under 55%. I let the cool air here at 7,000-foot elevation pour in at night and she prob got down to 52 degrees. Purples were very prominent, but I'm sure some will fade as the cure happens. I would totally grow this again.
Likes
1
Share
@Mr_Fuki
Follow
10th Week Last week of vegetation. Vanilla Ice is ready :) Conditions: Sub: Atami cocos Box: 80x80x100 Light: CLF 6100K 125W veg, CLF 2700K 85W flowering Airflow: 1 10W PC cooler inside box to cool CFL, 1 20W airflow fan to get air in Day time: 18h day / 6h night veg, 12h day / 12h night flowering Main nutrients: wooden ash, ATAMI, GREEN HOUSE POWER FEEDING, homemade special for flowering Feeding: first 12 days every 3rd day, next every 4th day, in flowering after switch 20 days every 4th day, next every 3 days Water: 0,3-0,6l per watering, every time it is on place = if sub is OK to water or with nutrients Training technic: harsh training for plant resistance and performance Genetics Skunk x Northern Lights x Afghani THC 17% Flowering time +/- 55 days Type Indica dominant Height indoor 60 - 90cm Height outdoor 170 - 200cm Yield indoor g/m² 550 - 600g Yield outdoor g/plant 450 - 550g
Likes
17
Share
Amazing results! They’re 2 weeks (14days) in bloom today! Flowers are developing everywhere with this one! I had to make an edit on one of the stems as I had no more room on the pulley and had to snap a stem and bend it sideways! (Super crop) can’t wait to see what happens with it as the last time way Ago in the past I accidentally snapped it after bending it as it heals firm and I didn’t realise but this time no mistakes even got her tied as I had to bend her twice as the first time she sprang back to position! Hope you like 👍
Likes
12
Share
Week went good some are further along then others but they all looking beautiful fan leaves starting to yellow and purple and such on some then others they just stretching still they won’t all finish at same time I don’t think but it’s ok
Likes
6
Share
Started the first topping and She hated it Shocked her near to death..... This is where she started to show what she is made of and still to this day I don't have a clue what she is but soon will know
Processing
Likes
10
Share
Likes
19
Share
I finally broke a pound with a single autoflower! Couldn’t have done it without AGLEX cob led’s, Remo Nutrients, and coco coir. They’ve changed my game completely! This grow started off as a pretty standard grow. I did absolutely no training until the veg period was winding down, and pre-flower was beginning. As the SCROG net went in, a little later than planned, numb fingers due to cervical spinal issues, and a poorly time muscle spasm, I snapped the main stalk...disaster right? Apparently not! They’re tough plants! Within a day or so she was perked up and sending up new colas from all the growth nodes now exposed to the 2000w AGLEX cob led’s. These lights have transformed my grow process, and increased my yields by over 300% compared to my old led’s, and only draws 408w from the wall. 1.23g/w is quite satisfactory I didn’t have much tucking to do this grow after the original SCROG. Due to the fact I was a little late getting the SCROG net in place, she didn’t have too much stretch left in her, she certainly fattened up quite nicely though, almost too much so in places. The front left side of the SCROG net got awfully crowded with huge buds packed tightly together. Lesson learned...keep the branches spaced apart slightly further, and maybe allow slightly more vertical growth of the colas to allow slightly better light, and air flow penetration. My issue is I only have 6 foot ceilings in my tents. The ceiling in my grow room is only a little over 6’2”. I managed, through SCROG techniques, without topping or fimming, to keep the top of my canopy 24” from the floor. This allows plenty of space above for the AGLEX cob, and exhaust fan. After last feeding I flushed with just Ph’ed water for 5 days, then gave the plant 48 hours of darkness, to rid itself of chlorophyll before harvesting on November 4th and hanging in a drying rack. It’s still curing in jars but after trying a few samples, it’s an awesome strain, and hits hard. It’s not as hard as it sounds to fill a 4x4 tent with a single autoflower, and still pull 18 ounces (504g) out of that tent. With simple SCROG technique, defoliation, quality grow medium you can achieve the same results. Of course you’ll need an AGLEX 2000w cob, but for an 18 ounce return on a $300CAD light, in 3 months, it’s a no brainer folks! You won’t find a better light under $300 Canadian. You’ll also need a quality nutrient line, and it’s hard to go wrong with the Remo Supercharged Kit. The proof of those 2 products quality are in my harvest. I hope this has helped improve your own grows somehow :) Head over to YouTube and visit my channel, just search for Scrog Freak, or click the link below. Drop a like and subscribe, more videos and logs to come! Recently entered a Gelato OG Grow Off and will be posting updates and instructional videos there. Check it out! Thanks and good growing! ScrogFreak https://www.youtube.com/channel/UCDFY6EjqIMqv2peq1d1eM1Q
Likes
2
Share
Super lemony smell with hints of berries kinda like a berry lemonade
Likes
11
Share
Week 5 - 08/27 Seedsman - Critical + 2.0 Blimburn - Apple Fritter All running smoothly, Introduced the exhale C02 bag last week thus far no issues or signs of deficiencies. Light defo - Heavy feed to start the week (Nutes) *Mid-Week Update* Week 1 -Early Flower* 08/30 Both have grown significantly since last update, Flowering has begun. Introduced Raw NPK (Potash/Phosphorus) *End of week recap* 09/02 39-40 inches in height Week 1 of flower went smoothly Introduced Raw NPK Phosphorus and Potassium
Likes
11
Share
@Sledge1
Follow
So overall, very good strain. Can't wait for drying and curing of this one. Definately gona do again. Thanks sensi seeds for the strain and the win. I'll update on the smoke Happy growing👊
Likes
33
Share
@Ema26
Follow
Day 85: what’s good guys? She’s looking and smelling great, temps are okay sitting at 25 for the most time and going down to the lowest of 16 at night. Humidity is sat at 30+ which is okay for her but not so great for my seedlings. I have a 400w hps bulb on the way so I’m hoping this will stop so much heat eating at the moisture. She still looks like she’s putting it on a bit but I think I can see quite a few cloudy trichomes and some ambers and a few clears so when she dries out next I’ll start feeding ph balanced filtered tap water for a week and see how the trichomes look. A lot of the fan leaves look like they’ve got a nitrogen deficiency maybe a slight bit of calcium too but being so late in flower I don’t think I need to worry about it. Very excited to see the changes as she finishes up! Any advice is greatly appreciated! Stay safe happy growing😎🍁 Edit: I’ve now started feeding her plain water. I gave her 2L of filtered ph 6.1 excited to see how she reacts to it.
Likes
4
Share
Likes
1
Share
@BruWeed
Follow
Esta semana ya realice la poda. Se encuentra en estos momentos en etapa de secado dentro de una caja especial para secados de flores que uso siempre y nunca me falla. En humedo hay 195g y utilice una lampara led de 150w en todas sus etapas. Próximamente estaré publicando cuando este en curado.
Likes
5
Share
Las plantas están progresando de manera saludable y muy rápido Les aumente en 0,5ml los dos nutrientes que les estoy dando y ya pueden ver los resultados He estado muy pendiente de las plantas con el tema de la luz, frecuentemente las estoy rotando para que absorban la mayor cantidad de luz Estoy aplicando jabón potasico para limpiar las hojas y alejar las plagas