week 14

Hello. This is the end of week 1 and the beginning of week 2 of flowering. I switched over to flowering 6 days ago so this is the end of week 1. Mixed up some nutrient for the 15 gallon reservoir and am giving a few minutes a day so the 15 gallons last 6 days. And I'll hand water with rainwater when the pots seem dry. The plants have filled up their spaces now and it was time to flower. I'm flowering about a week late from last year, but it was a cold spring, and I got the plants in a little late. So, I'm hoping to harvest around Aug 20th or so. Have Fun. Chuck.

We successfully completed week 8 and things are starting to get interesting. The buds have grown significantly in size over the last days and the smell has gotten much stronger. I think I also need a new air filter… The leaves did some coloring in the past week which makes this beauty look even more handsome. I optimized the air intake of my tent this week by replacing my one 100mm tube with two 130mm 3d printed light traps so breathing is much easier now and the vent can run a bit less fast.

D57/F13 - 27/05/23 - Added sunset and sunrise (only red lights for 1,5 hours at the start and 1,5 at the end) D58/F14 - 28/05/23 - I set up my AFD (see picture). I find a way to feed her automaticly when I 'll be out, Every day I start the pump for 30 sec (about) to give her 2 liters of nutes with my AFS (Automatic Feeding System) D59/F15 - 29/05/23 - Automatic feeding D60/F16 - 30/05/23 - Automatic feeding D61/F17 - 31/05/23 - Automatic feeding D62/F18 - 01/06/23 - Automatic feeding D63/F19 - 02/06/23 - I'm back, Nora looks ok, automatic feeding works. A little bit of problem with timelaps framing, but it's ok, I've got all info I need. EC 0.9 and pH 6.5

Good reach! 50cm... Clones doing great ♥️♥️♥️ LST on the top, peaking too high. Doing great!! 💗 This plant gonna be 40+ grams 🤪 + 2 great clones!! ♥️ Happy happy

I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!

Week 4 is now Here and running into some issue with bug spray really did a number on my girls. The XL Haze plant bounced back quick, Thank God for good gene. This week I will also raise the light a bit to get the girls to stretch a bit more. This week will also be the first day the girls get a some actual nuts

Trop Cherry #8 x BeeJayz hasn’t been topped, I transplanted the girls this week from a 1 gallon pot to a 3 gallon pot. Trop Cherry was in a plastic pot but now in a fabric pot. Plants seem to be growing well.

Still going strong

Gracias al equipo de Divine Seeds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁Fractal: La semilla de marihuana Fractal es una cepa especialmente psicodélica que Semillas Divinas desarrolló para experiencias esotéricas y místicas, meditación y creatividad. La potente y vívida Skunk#1 fue cruzada con una pegajosa Afghani Indica, y el resultado es ahora conocido como Fractal. Este exótico híbrido es resinoso, picante y productivo. La mejor opción para el cultivo comercial: un compromiso entre mayores rendimientos y maduración rápida. En interiores se espera una altura de 1,70 m, en exteriores las plantas crecen hasta 2 m. Fractal se adapta a todo tipo de entorno de cultivo: cajas de cultivo, instalaciones hidropónicas o aeropónicas, plantaciones exteriores, balcones, terrazas e invernaderos. Para un mejor rendimiento se recomienda entrenar a las plantas de Fractal para ampliar su estructura y limitar su crecimiento vertical. Usar ScroG o SoG, LST, FIM o topping. Fractal tiene una inmunidad inherente al moho y a las plagas de insectos, pero como sus colas son gruesas, proteja sus plantas del aire viciado. También durante las semanas de lluvia su plantación puede necesitar ser cubierta. Listo para la cosecha al aire libre en octubre. Grandes y densos cogollos. Los cogollos de marihuana de la variedad Fractral huelen a hachís y algo a tierra, desprenden cedro y notas afrutadas al romperse. Mida su porción con cuidado: su potencia está por encima de la media. Con Fractal experimentas un apedreamiento general que te hace sentarte o frena tu movimiento. Perfecto para pasar una noche junto a una hoguera. Es mejor consumirlo por la noche. 🚀🌻 Consigue aquí tus semillas: https://divineseeds.net/es/fractal-fem/ 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 6: Debido a unos cortes en el suministro de luz, ellas han ralentizado algo su desarrollo. Se siguen formando los cogollos aunque algo mas espigados de lo que me gustaría, algunas variedades han aguantado bastante bien este estres, lo que indica una buena genetica, entre ellas está esta variedad. Continuo con las dosis de nutrientes recomendadas por el fabricante. Potencia del foco: 100 Adlite: máximas horas.

04/23 500ml of solution, PH 5.8 04/24-- 04/25 500ml of solution, PH 6.3, 4ml bio-bloom + 3.5ml bud candy + 2ml bud factor X + 2 ml sensizym + 2ml B-52 + 2ml nirvana 04/26-- 04/27 500ml of pure water 04/28-- 04/29 500ml of solution, 4ml bio bloom + 3ml top-max + 2 ml bud candy (mll)

So the grow cycle was pretty easy. I work away from home and I sometimes have to leave for 4 days in a row. Before I'd leave for the four days I'd just add 4-6 cups of RO water with some Cal-Mag. When I can back she was always bigger and didn't have any problems. I was lazy this time and never checked the PH of the water. This strain is pretty resilient so props to sweet seeds. I decided not to LST this plant, it was a little taller than I wanted but grew in a nice shape. I still cant believe how purple this strain is. I started to get foxtailing on the top bud not sure what would cause that. Once again sorry for the lack of pictures. I'll let you know the smoke report later.

Poor babies! They've definitely had a rough start. I'm fairly certain now the issue has been too much moisture in the soil. I believe there are a few factors that have had an impact: 1) Obviously, giving them too much water. In the first week I gave 90ml into their 1 litre pots over two waterings. I thought this was okay because the top soil was completely dry between waterings. Someone suggested that seedlings don't need additional water for the first 10 days so I'll try that next time 2) Feedback I've had is that my soil mix is quite heavy @ 63% soil, 25% Coco, 6 % perlite + 6% vermiculite. In future I'll increase the perlite portion to about 40% 3) Also, I just noticed that the plastic pots I'm using have very small drainage holes. I think this has caused moisture to accumulate at the bottom of the pot. Yesterday I pushed my finger all the way to the bottom of the pot and it is much wetter at the bottom than at the top. So yeah, tough start. But they're still growing, albeit very slowly. I trust they'll survive.

Hello fellow growers, Week 2 for the Double Grape and once again there is nothing much to report. No issues as of now, it's growing nicely. I just take care of the watering (mixed with HESI nutrients), otherwise I sit back and I enjoy the show. I think I might top it next week, not sure yet. We'll see how it goes. Thanks for stopping by! Happy growing and see you next week 👍

Hello This is the end of week 4 and the beginning of week 5 of flowering. Still 5 more weeks to go... Hoping to harvest around the 2nd week of Aug. Plant #3 is showing a lot of resin already. See the pics... The white around the edges of the leaves is the give away. Found a few ladybugs this week and brought them inside here, to help. Was hot at the beginning of this week. Now it back to normal temps. OK. Have Fun. Chuck.

She is growing strong and healthy.

Clones didnt like the strong light at first and needed some days to get used to it. Some even showed small signs of sunburn. Automatics seemed to be doing fine as they were grown from seed. Clones were put into small pots to encourage growing strong roots first.

Eight weeks in their big girl pots! No fertilizer last week due to rains every day, and they look great. Even the slow to grow sour strawberries are looking good, and my rogue seed from last year’s Runtz Layer Cake is growing tall quickly. The crop is wuickly becoming a back door “Wall of Weed”.

unfortunatly the weather changed and temperature outside dropped down to 12 degrees celsius. It had a big impact on my plants. One plant after another wilted and i tossed 28 of them. The substrate is also to wet and maybe it was to often recycled. Only 42 plants left and only some really look healthy like they should. I have to start again with new seeds to fill may table. I am so angry about the wasted time.