For this grow I've used, For the growth 1 sf1000 2 fan 15w 1 extractor 150mm 350m3/h 1 carbon filter 150mm 1 Hydro Shoot 60x60x140 1 timer 1 thermostat Heating system for the winter month To start pot 2l, after 8l 18 Hours On, 6 hours off light For the soil I've used plagron light mix and rqs pellets. For the blooming 2 sf1000 2 fan 15w Extractor + Filter 150mm 1 Lite 60 box 2 timers 4 RQS Fabric Pot 15l 12/12 Plagron batmix + RQS Pellet After harvest, I'll not use my usual carton dry, last time I've got mold on few big buds, si this time I've put the stuff in a room with 15w fan (see video), Thanks for all my friends! And again thanks to RQS and @James

Hi, everybody. With you back in touch with the Russian gardener. Today I decided to show you my friend's tent. The size of 100 cm by 100 cm has 5 plants of auto AK 47. 5 plants-63 days. 9 weeks. He did not do LST training, but pulled them with a lamp, raising it every week by 10 cm. This is one of the most common cannabis strains on the Russian market. Thanks to strong undemanding genetics, grows almost anywhere in the most adverse conditions, great for the harsh Russian climate and for novice gardeners who with minimal skills want to get the most. As you can see, yesterday we planted 21 sprouted young plants that are preparing for guerrilla cultivation in the open air Later, when we grow them outdoors, I will create a separate diary with a detailed description. Despite the little experience of growth, my friend is a good student and a reliable person, we have grown grass together and harvested. That's why I trust him. Except him, more no one knows about my Hobbies. In this case it is necessary to observe secrecy.

Girls are looking amazing and smelling amazing. Have been watering 2 - 2.5 L of water Daily. Weekly Feeding of Green Rush Beefy Bud still. Its day 45 should be a 60 day plant or so. Shes stacking nicely !

Transplanted early this week. This girl showed her pistols under 24hr light so I'm guessing the genetics for her are strong. I plan to let her go and take a few clones. She also got switched to 18/6 light. She is absolutely Killin it

Loving the way this strain is bushy but yet so compact. I plan on vegging her for atleast another month or so before I throw her into flower. I definitely recommend this strain especially if your looking for explosive vegetative growth.

Day 63 - lookin good.... haha.... um, tanks stabilized, ph 5.8 - ppm 1200 .... she's feedin alot..... buds are fillin and lotsa white furries.... listed the nutes and amounts etc.., but i'm kinda feeding her as she needs.... so every few days she is drinking 2 lts +- and i'm just mixing up a neut solution in a 2 lt bottle every day or 2 ..... sometimes she just wants abit of water...... Day 64 +vid....shows her deep green and gloss... abit of crystalic :) Day 65 - vids pics.... trimmed her, and abit of bending.... Added blood and bone.... she's stretching alot, 60cm+ ........ Day 67 took all the early buds on all the stringy 0ff shoots.... Poor lighting vids, but don't want to mess with her flowering, :) 👍😎👊

Nota: La primers mitad de las imagenes corresponde al principio y la otra mitad al final respectivamente En esta semana comenzamos a aplicar fertilizantes de engorde y se logro notar una diferencia al aplicar monster bloom el viernes hoy domingo ya se vio una diferencia de tamaño las plantas lucen bien y an empesado a adquirir resina y bellos colores Martes : solo tek bloom , heavy bud pro (1600 Ec) Viernes: monster bloom , vitamax , cal mag (800 Ec ) Ph 6.5

Vegetative Woche 3: Tag 29 gab es das erste LST nach dem Umtopfen für die Ladys, damit sie das Zelt bald schön ausfüllen zu viert 😊 Hierfür einfach bodenhaken für die Triebe und am Hauptstamm nutze ich gerne die roten Clips. Tag 30+31 gab es nichts besonderes zu tun 😊 Tag 32 wurde das erste Mal gegossen nach dem Umtopfen mit 2l ph 6.2 Wasser mit 0,8g/l Enhancer, das Wasser habe ich zum ersten Mal mit meiner neuen Akkugießlanze verteilt und ich hoffe so noch gleichmäßiger gießen zu können 😊 Tag 33 wurden wieder mit LST gearbeitet und die Triebe mit den Bodenhaken weiter nach außen gebogen, damit ich möglichst bald ein relativ gleichmäßiges Blätterdach habe welches die gesamte Grundfläche des Zeltes ausfüllt. Tag 34 war wieder Ruhetag Tag 35 wurde wieder gegossen und zwar wieder mit 2l pro Pflanze mit ph Wert von 6.2 und 1ml/l Calmag und auch hier wurde zum Gießen di Akkulanze verwendet. Und so endet Woche 3 der Veg

📆 Week 8, 24-30 June 2024 24 June - Defoliated 25-30 June - Observed and let the plant grow. 📑 Defoliated Pablo. Well, she successfully smothered out the main apex and topped herself. I gave it the final pinch to complete the process. Pablo is one of most densely packed plants I’ve grown. She is beautiful and lush, but she requires a little more attention than most. 🍶 24, 27 June nutrient solution changed 🍽️ 24, 27 June feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient solution EC 2.8 at 74 degrees F 🔆 Light power at 80%, DLI 40 canopy coverage at 12hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this week. Thanks for the look, read and stopping by.

The Dr seedsman CBD germinated backwards but she looks fine🤞😅

There's another week, last major cut, Gorilla No. 1 was male or hermaphrodite so it was removed, Gorilla No. 2 looks like a female for now, maybe it will stay like this 🙏 Day 40: Because one wheels grew 20 cm above the others I had to do HST, I can do topping, but I didn't want to lose buds, so I chose HST Day 41: the next day, the HST branch turns behind the light day 42: The last day of the sixth week, the girl is in great condition

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

.

She grew really well and strong, I topped both plants, and maybe I shouldn't be. Cause height, I'm just not getting in my autos and me topping them is leading me to believe that they are flowering earlier than they would if I just left them. But I'm still happy with how these grew, instead of 1 main cola I got 10 smaller ones, so I'm happy, they grew strong and quick, gave no trouble but a bit of nutrient burn. Very easy to grow and very resistant some of the most I've grown so far, they bounced back very quickly with the very few issues I did have, she was really easy to turn around and if you found this to be your strain, then you'll get some decent harvests back from a few plants, hoping to see 130-160g from both plants. WOW. 1.5 day on the cure and already I'm getting the bang of ripe bananas. The berries smell has kinda dropped a little. Amazing at how fast this smell took over. Ripe banana + fruity and a deep fuel has taken over my cure press. And the bud is in jars, it still stinks.

Alla fine sono uscite 4 su 5 piante Una Future Auto#1 non c'è là fatta Continuo a farle crescere senza stressarle, visto che al momento sto usando una 300 watt Lumatek, anziché la mia Marsh Idro 480 watt "Evo".. tutta un altra storia per 4 piante, anche se la Lumatek è un ottima luce...ma con 180 watt di meno! Metto se riesco degli aggiornamenti con foto giornaliere o 3/4 volte a settimana, così da vedere gli sviluppi in tempo reale 🙏

🙏 Big thanks to Plagron and Zamnesia for putting on the Eternity Grow Cup 2025. This kind of platform means a lot to the community. The chance to push our grows, test out new techniques, and connect with other cultivators from all over has been inspiring. Appreciate the love and effort that went into making this event happen! Hope everyone enjoyed looking over my shoulder on this grow and best of luck to all participants! REVIEW - Runtz (fem., photo.) from Zamnesia: ⬛⬛⬛⬛⬛⬛⬛⬛⬜⬜ The seeds from Zamnesia germinated rapidly, rooted strongly, went wild in veg, and produced an ample amount of high-quality medicinal flower. The diary speaks for itself on that front so this space will be more of a phenotype review. The plants were labelled A, B, and C from left to right respectively in photos. A and B were the 'clasicaly-appearing' sativa-esque leaves while C was the more 'indica-appearing' phenotype. Although A and B appear the same qualitatively, they did produce substantially different amounts of flower (despite their DLI being near max out for the entire tent footprint without supplementing CO2, so I do not think just being in the middle attributed to this). Past their different yields, A and B also have vastly different profiles. A is a classic gelato/ice cream cooler/Z terps, and my personal favorite of the plants (wish I had taken a clone of this one instead). B is the most on point for what I think of with Runtz, classic Z terps but with a slight tropical/rotten/sweetness to it. C had the misfortune of being ready to chop a little earlier than the other girls so her profile is mostly just spicey kush now. I did observe intersex flower sites but given the entire context of the diary and how the plants performed, I have to assume it was user error. No pollination observed in any of the flowers, as zero additional intersex sites occurred. The distinction between A, B and C is what I would expect from a typical F1 cannabis seed. I do not enjoy growing from seed much but these girls were manageable. Add to that the relative stability of the genetics for a Runtz recreation, and well, these are good quality beans for a great price. Not only is Zamnesia responsive and available, their confidence speaks volumes. How many vendors would have an in-house Runtz, knowing how much of a genetic-gravity-well it is in, and be confident enough to let ~200 randos grow it and show it? REVIEW - Green Sensation from Plagron: ⬛⬛⬛⬛⬛⬛⬛⬛⬜⬜ I enjoyed using the green sensation, the NPK values on it make it versatile in application and a power-house in flower. I can't say I noticed anything better or dramatically improved, although comparing to Heavy 16 and asking for a marked improvement is big ask in my opinion. What I was able to do was seamlessly integrate the Green Sensation into my current routine. The additive stayed homogenous, was easily introduced into solutions with no adverse impact to the water contents or pH. Most importantly, the plants enjoyed the additive and it did accomplish the main goal of being able to wane off your primary line. In this respect, by using Green Sensation I was able to save resources by lowering my Heavy 16 inputs across the board approximately 50% and supplementing with Plagron's Green Sensation.

Este próximo día 14/06/23 entraremos en la 3º semana de crecimiento. A día 12/06/23 llevamos 28 días desde que se empezó a germinar. ya están todas trasplantadas a la macetas definitiva de 7 litros. Las he regado con roots + crecimiento + calmag + enzym. Todo de BOOM nutrients. He realizado el trasplante en 1 hora y 50 minutos en la mañana del lunes 12/06/23 en directo, en twitch.tv/xmackobox