Hi Guys! All good with this lady, just one thing, is fucking cold outside, so inside my tent is 20 degrees, maybe this is the reason the leaves are a little bit sad! hahaha That's it, not much to say this week. See you around! Love!

Olor a natillas de chocolate Segunda semana en la que siguen saliendo setas 🍄 en el sustrato 🔝

Flush week, straight water flush and I expect to chop and harvest this coming Sunday, maybe Saturday depending on trichomes and how dry the promix HP is. Overall I'm happy with this plants growth, she survived a heat stress issue and has developed lots of bud. While not huge buds, compared to my last grow of this strain, I'm still super pumped with this strain/plant. Updates will come after harvest and after drying for final weight total.

Huge yield of sticky buds, took 12 weeks from seed and filled a full 1.2m tent. Needed quite a bit of maintenance so happy to reach harvest day. Ran simple nutrients, slight foxtailing at the end, but most buds in the net are around 100g each plus ( and the net is full! and still a whole plant hanging with fat buds👍

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

6-20

Grand Daddy Purple auto is doing well. She has stretched a little more, and looks like she is debating about going into bulking soon. She does have a little nute burn that has been there since at least last week. Still looking really good. She is starting to develop a smell, but I can't pinpoint it yet to what exactly. It's kinda faint at the moment. Everything is looking good. Thank you Medic Grow, and ILGM. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Took off all of the tops from the shoots that were getting tall. Mayne a bit too much we will see how she responds. Tied down the 4 mains to the edges of the pot. Need to top the 2 remaining mains towards the end of the week when she recovers from today's stress. Needs water, may do a full feeding this time.

This marks the start of week 4 for these wonderful lady's . I'm going to be slowing up on the nutrients and the watering noticing some stuff I don't like seeing . For the growth difference in 1 week all I can say is WOW I'm getting very excited to see what the future holds for these young lady's !!! I'd like to thank every one for their continued support! I've learned so much in such a short amount of time because the community is KICK ASS . I'm going to be repotting these fine young lady's into their final homes at the end of this week! Stay tuned ladies and gentlemen alike and remember to check my diaries daily for updates ! Anyone checking out the pictures it isn't mites or any of that I been having a battle to get them to my standard of clean since the transplant. Slow and gentle is the way so no damages are done ! :) -Happy Growing!

Going nice;))))))

Have seen a lot of good diary’s on these had to get some for myself to see how it goes! Hopefully we get some super purple buds! Stay tuned & happy growing friends!🤙🏼✌️🏼🌱 Day 1 - Finally got them planted & water with fox farm big bloom (6tsp per gal) Day 2 - all 5 have sprouted & doing great! Day 3 - 2 out of 5 seeds have fallen off but they are all still growing & looking good! Watered them a little more this morning👍🏼 Day 4 - Looking great🙏🏼 Day 5 - Grow babies Grow!! Day 6 - Plain PH water 6.4

she actually went for just about 10 whole weeks of flower. I’m chopping her at 69 days, as I write this, but I will post relevant photos in a harvest update after it’s dried and weighed. I watered with only distilled since the last update, and starved her of water and RH in hopes of increasing last minute the resin and trichomes production. Flushed with more distilled and after a few more days turned the lights off for two days of darkness. The next update will have the result.

Here we go... Light Power: 60% Day 31 Photoshooting Topping

Starting into Week 7 Flower, week 13 total Mandarin Cookies smelling out of this world! Very nice and sparkling trichs! Silver Kush #1 is filling in and getting some nice buds, #2 is pretty far behind. I’ve got a feeling #2 might be destined for the hash bag. Not much weight on that little lady yet. 3 - Madarin Cookies are two in back and one in center; 2 - Silver Kush are two up front; 2 gallons water/nutes per 5 plants, alternating with plain water (just calmag, malassis, Ph. 6.4) every other day. Ph.6.4 (1.5 C.F.) Fox Farm Ocean Forest, mixed with (1.5 C.F.) garden soil, fills (5) 5 galllon fabric pots perfectly. (50/50 mix.) Again, The new version of Spider Farmer SF-4000 is an awesome light, for anyone wondering. Can’t say enough good things about this light! This is my first LED, so still trying to figure it all out. I ended up moving the light higher up, to about 18” from the highest buds, to stop the curing and mild heat stress. Power outage was a long few days, but the plants seem to be bouncing right back from it. Quality doesn’t seem affected, but end weight might have been hurt slightly. Oh well... what can ya do!

! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! 💚 Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: after 48 hours of complete darkness (important for seedlings to make sure all plants switch into flower same time), I finally switched my lights to the 12/12 schedule and sent my ladies into the flower. - more than healthy and going well - Day 5: super strong and praying upas u can - Day 3: Foliar spray with APTUS Regulator and APTUS Nutrispray to give them extra micronutrients and give them a little shell for protection. ! always use APTUS Regulator first and mix well with your water before adding any other nutrients for Feeding or Foliar! Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ Stardawg by MSNL https://www.marijuana-seeds.nl/stardawg-feminized-seeds --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique

First week of flowering. The plant will stretch, so i adjusted the LED dimmer to 100%. Did a good defoliation too. Doing good, very healthy.

About day 38 i am just realizing that i am stupid and been feeding the biogrow for cocoa coir 🤦‍♂️ way iver nuting with soil it says never to go over 1ml/L So i will be flushing for at least 1 or two waterings. Looking for the tip burn to stop spreading and the tips to not look like there clawing

Today is day 82 and start of week 9 of flower. I‘m pretty sure Nr.2 is nearing the optimal harvest time. Unfortunately I will have to wait for the other two but I tink they are getting there. The frost on Nr. 2 is much more prominent but still I don‘t see any amber colored Trichomes on the buds. Only on the leaves. Next Week I hope they get the desired look. Still a little more developement to go but i‘m very happy with the plants so far. I hope this diary doesn‘t get Boring but I‘m actually glad the plants develop in a slower pace since thats more desireble. The buds from Nr. 1 and 2 are very dense and hard like a Rock. I hope the wheight will represent that. Sorry for the late update, have a nice rest of the Day 😌

One week more. The two ladies have developed quite well in the last week and I have now defoliated them again. I think the yellow leaf tips are due to low humidity. The morello cherries auto in the soil also had a bit of bad news for me. There was a small bag of bananas, which I have removed for now and will continue to observe whether new ones appear. With a new cultivar, I can well imagine that it will be even more stable. Otherwise, the morello Cherrie flowers very fast and l'm a little surprised at the low stretch.