This week I made the decision to remove the ScrOG net because the plant has stunted growing and the leaves were droopy before and after watering . Given the fact she is an indica dominant strain, my approach to training wasn't the best. Also the light intensity has been adjusted to PPFD level of 700. The light schedule is 18/6, so the DLI is about 45, which is the recommended maximum for autoflowers. I will keep my eyes on her, how is she will react.

Lots of work to bring in the harvest. pheno #1 (glass jar label #1) : 162 gr. = Big Plant. Big leaves, easy to remove. Good smell & taste. 👌 Buds not that hard pheno #2 (glass jar label #2) : 168 gr. = Very Big Plant. Big leaves, easy to remove. Big stems. Citrus/Grapefruit smell 🍋 Could flower one week more pheno #5 (glass jar label #3) : 133 gr. = Semi Big Plants. Smaller leaves. Smaller buds and leaves. Incredible good taste 😍 pheno #7 (glass jar label #4) : 124 gr. = Small plant with beautiful narrow leaves 🌿 Spicy unique diesel smell and taste 🔥 pheno #5 (glass jar label #5) : 137 gr. = Small plant. Beautiful small and hard buds. Good smell & taste 👌 pheno #6 (glass jar label #6) : 161 gr = Small plant. Beautiful small and rockhard buds 👌🏻 Good smell & taste 👌 Great harvest 👊 Great strain 👍 Stoned Indica effect 😑 Couch lock effect ⚠️

We are officially in full bloom. The have been enjoying 6-7 hours of sun light per day for about 4 days now, then brought back in under the cobs. The girls are all exploding with growth and stacking what I expect to be huge buds.

Bestva Quantum Board LM301B / Mr Hide seeds Semana 8 desde germinación Semana 4 de floración En 6 plantas tengo 3 tiempos diferentes. Dos empezaron a engordar de forma veloz y se les ha aplicado PK durante la semana. Dos están un poco más retrasadas, tal vez el equivalente a una semana. Hoy se empezará con PK para ellas. Dos están aún más atrás. Se ven sanas. Buenos humos

KICKASS AUTO by KANNABIA Week #8 May 21st-28th Week # Flower This week she continues to fill in her where it counts her bud sites are getting thick and her trichomes are like sugar dust and she getting a nice little arouma about her. She's got evenly spaced bud sites that run down the stem she's in a AC INFINTY 3 gallon cloth pot feeding her nuts twice a week until run off then water every other day. Thank you for stopping by!! Stay Growing!! Kannabia.com Kickass Auto

Day 14 - 3 out of 5 are growing a little slow/weird, all 5 seem to be growing kinda slow compared to my first run of autos but hopefully everything does good🤞🏼 Happy growing friends🌱✌️🏼 Day 17 - Still have 2 extremely weird looking ones, really hoping they bounce back🙏🏼🤞🏼 Day 18 - 3 out of 5 still going strong, the other 2 havnt changed much!

The girls are looking better and better each day. They have finished whatever stretch they had begun, and are now stacking some very decent buds 😊 They are showing some phosphorus deficiencies, but at the same time are showing that they are getting some nutrient burn 🤔🧐 I’m used to making one solution to feed, and that seems very difficult to balance with some of these Auto’s, as I have had to adjust for these girls and not my others, anywho, the joys of Autoflower’s ❤️ Only a few weeks left, hopefully we’ll get through it as they are looking promising at this point. Happy Gardening 👊🇨🇦❤️🌱

Fought root rot/res/nute issues all week, but seemed to have turned the corner. Nice steady growth. Cleaned the res hard at the start of the week and continued to treat with H2O2, and switched to Lucas Formula for nutes along the way. I added ~30mL of 3% H2O2 daily for 4 days before the smell seemed to disappear and roots recovered. Afterwards double dosed the hydroguard again. Noticing very dark and shiny leaves with some clawing. I hadn't been measuring the EC in the res and figured I burned the plants. I replaced 1 gal of the res with pH'd tap water to reduce the EC/PPM. Did not take exact measurements. My notes get thinner from here as I had too many plants going at once to properly document this first attempt.

Earlier watering was fed with nutrients, and my temperature is not low so I should go with minimum to medium quotas with more water avoiding burns, without much runoff mixing with soil compounds and mycorrhizae for better performance I know they need a calcium magnesium for better performance the problem is money I will continue with the use of salt Epson the option I have at the moment, direct sulfur in the soil mix has helped me hear a noticeable change. watering ph 6.2 solution temperature 20 ° - 0.50 g of large white microreceptor 2 days earlier sprayed with ppm-free water via leaves - lights off to serve as a cool-down shower is great for stomata . Simple led panel added as main light source 260watts being divided to 3 plants in the fullspectro tent model, did not get much difference in temperatures compared to HPS, is more the same spectro ratio and UV to reach more directly in the trichomes and terpenes. Moc medium leaves look more like Indica while larger leaves bring one more sativa a set a nice strong sweet smell, I prefer to conclude in the end the true tone I feel, she drinks more water than others the soil is easier to drain So I see in her an ability to take more quotas of nutris, slowly being able to take if necessary always try to avoid burns ...

She's over doubled her height this week!!!!!!!!!! Looks like she's going great! An educated guess says she is just about to enter flowering in the coming week.

The plants are ready to be chopped and hung for 3-5 days. I removed all the fans leaves and left them all branches on the main stem. The ladies smell so strong I can wait to see how they turn out when they are dried and cured. 1) I plan to hang them for 3-5 days @ 71 f and 50-55 RH, 2) Do a final tight trim 3) Than I will move them to jars and cure for 2-3 weeks I will update the diary with harvest pictures & weight before I move them to the jars for curing. I think the seeds might have got mixed up when packing because these three plants were all supposed to be the same and you can clearly tell from the pictures that they are not.

The 🚀 is loaded 😘🍀

Good week so far. 😎 Ups and downs,but learning tons along the ride.🤓 The plants are responding well to the flushing (yes flushed again) color is much better and just the general appearance looks good after 2 days. 💪🌱💪 Lst seems to have been received well, no extra stress to these girls. 🙏 Will continue to update with pics and vids throughout the week.

Day 41: Watered all plants with 1 L with nuts 1383 ppm, 2942 us/cm, EC Day 44: Watered all plants with 1 L without nuts Day 46: Watered 9 plants with 1 L with nuts 1432 ppm, 3046 us/cm, EC Watered 3 plants with 1 L with nuts 1352 ppm, 2982 us/cm, EC (2nd week of the flower schedule) Looking good and healthy so far

Rough week! Found two major hermie issues Pheno #5&2. Could be because they where the OGs and they just had a long stressful life. Really bummed because they where the biggest in the tent for sure. Have a coupoe tops with orange hairs so maybe got pollinated, all i can do is keep my eye on them! Besides that everything is looking so great had to re-train and move canopy around but still have full coverage. Getting allot more tops

Day 48: Just finished my video from seed ordering to flowering. Mexican & CBD are in size 0.8L pot, while Green is in a 2L pot. Green was the first to shoot up so I put her in a larger pot but bent her stem under the soil which stunted her growth for a few days until her stem toughened up. CBD is now the tallest. Mexican was a runt to start with.

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛