Plants seemed close to finish so i defoliated on day 52. The plants went through shock. I will not be doing this again Attempting Generative steering, i dropped humidity and allow the pots to dry out more. Watering every 2 days by hand

Feeding only molasses this week every other watering. Water phd at 6.5 buds still packing on weight. Just going to continue to watch trichromes till I get about 30% amber 70% milky while they deplete their nutrients. Thanks for stopping by. If ya like leave a 👍

Hello welcome to week 3. Poppy is suffering a bit from overly harsh LST but still growing. I broke a node today and it's really awkward to fix. I am not sure the node will survive. Day 17: The node did not survive. Whoops. Oh well more space for growth I guess. Day 18: Poppy has recovered from the LST now and is vegging fast. Fertigated 2l Day 19: Slightly adjusted LST. Poppy is really stretching out now. I have adjusted the timer such that the main tent is now getting 20/4 upped from 18/6. After monitoring DLI at 18/6 for a week I am unhappy with the overall level but because of the varying heights of the plants I am limited in what I can do in adjusting the light height. Some areas were only getting 20 DLI. So I have rearranged to have the taller plants on the edges and the lowest in the middle and doing it this way all plants are getting between 35 and 50 DLI at 20/4 - although one or two cola tips here and there are getting 55. Will monitor for a week. Day 20: Not taken photos yet, about to fertigate. I have noticed she is looking a little darker in the tips and has a vague blue sheen to her in places. I am going to reduce her nutrition a little bit. Day 20.5: Performed LST and took off three big leaves. Poppy is a pancake again. Fertigated 4l

She’s a big one cannot wait to see what she put out. she got unhappy and lost most of the fan leaf but she still going.

This week was really good. She has recovered very well. I just topped her and decided not to train her this week. Maybe next week, i watch how she goes this week. Have a nice week and thank you watching my diary✌️

What a joy this grow has been. She was a real beauty. Absolute joy to grow...strong branches but she likes to stretch a lot. I knew wat to expect. I have grown Lemon Kush outdoors 3 times. The scrog this year was the perfect solution. I will not grow her again outdoors. This was my first time to see her finish. Seeing her flower this year, she just needs the warmth in the end. The climate here rarely offers that. I must say the dense flowers are amazing also size and yield is incredible. Update about that later. Trichomes were underdeveloped. I had to harvest early because of mould. The last 3 weeks of flower the temperatures were very low 10-15 C daytime and very very wet. I believe this stunted the plants. They made a full stop in development and exploded again in the last week. 3 days of sun did more than the 2 weeks before. Weather forecast were bad so big buds were harvested 25 september. We eventually had more sun than expected and bottom half was left until 2 october. That week made sooo much difference!! Those bottom buds finally developed some nice trichomes and turned purple. Of course I wish the big buds could have enjoyed the sunshine during that last week as well. Most of you will know, being an outdoor grower...Every year is about compromises. This year was so hot during growth and cold and wet in bloom that mould was unstoppable. After all I am very pleased with this grow and cant wait to taste some of this. Probably needs al long cure though to bring back that lemon scent. Almost seems like all that the rain washed the scent right off her😪 Keep growing y'all!

This week great did a top dress couple days ago so just watering at a ph of 6.5 for now ...till flush in about 2 3 weeks

the plant has developed a lot this week but I notice a slight yellowing which I think is due to the fact that it has not yet received nourishment but that tonight it will receive and we will see what happens and if it settles in place, I will see what to do

Flowering process. Good weather

I never even weighed out my harvest, but it was almost 3 mason jars stuffed full. I actually never smoked it either; I rosin pressed every gram of that $hit. Definitely better quality than the dispensary concentrate I’m used to. I’m very happy with my results, considering it’s my first run. They went through a lot like I moved halfway through, the plants lived I am unventilated closet for a bit because my tent wouldn’t fit and had to buy/wait for a new one, then had to deal with the winter cold in my environment too and all that. It was really fun and a huge learning experience. Hard to rate the strain considering it was my first grow, but again, considering everything I put these plants through, I give it high rating. I would recommend.

Absolutely stunning buds

What a fun experience! This was my first time trying a mixed grow style of synthetics and organic. I think I may have found my new go-to strategy. This definitely wasn't a perfect run by any means - as a matter of fact, I botched the feedings earlier in her life. However this grow definitely taught me a lot more about how to treat this strain properly. Now I'm running her clones in the 3x3x6. So the legacy will continue! Let's see how this strain does during the summer months! Cheers everyone! This has been an awesome grow. What I'm lacking in yield, I yet again make up for in quality. And I don't think yield will be an issue with the clones, they're week 6 veg - and quite massive! - RWI out!! 😁 😶‍🌫️🤑

And she’s up and drying! Massive yield, piney earthy terps— perfect structure. Just a great plant all around! More to come

This girl needs to be defoliated regularly…I’ve been feeding her 3 gallons of water for the past week as the dry seasons steps in no problem.

Just switched her 😎💚🔥 Picking leaves daily stopped now until day 21 for heavy defoliation 🙏🏽😊💚🔥

Semana 6 y se ve en perfecto estado nuestra planta exceptuando por un pequeño brote de oidio debido a la alta humedad actual debido a las fuertes lluvias, muy bonita dejando unos cogollos muy bonitos y de un buen tamaño

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.