Likes
Comments
Share
@Naujas
Follow
Well, that day has come, the girl would have been really different if not for the high temperature, strong light, and a huge lack of potassium :( well, everything will be fine next time :) live and learn :) I am satisfied with the result, which is what I need :) got 200 gr of liquid :) gathered a lot of sugar leaf :) they are already in the sweet shop :D I will make an addition!! good growth and success :)
Likes
15
Share
@Be4ry20
Follow
Hello People! I harvested my Honey Runtz now some days ago already, was busy with life and didnt post. yet she is drying well in my dry tent! im a bit nervous about making the dry sift soon. will be my first time sifting a whole plant! will post more once she is dry and sifted! :) Hello People! guess its time to show my first time making hash off. its my first time doing this kind of dry sift so didnt know what to expect or what to do. i did alot of research and just free balled as i felt like is right. After Harvesting and Drying i took all the sticks out, left the sugar leaves on the nugs and then put everything in the freezer for like 3 days. ordered some dry ice and did alot of preperations. like getting some big sifting screens. so first i put like 1/4 of the frozen material in a 220 micron bubble bag inside of a big bucket. threw some dry ice in and then started to shake it, so the trichomes felt off.then i collected everything from my bucket and put it in a glass jar with parchment paper (to get better out again)did this 4 times so no material got left over. after the first sifting with the bubble bag, i threw everything on these big sifting screens with 190; 160 and 73 micron. then the drumming started, i used 2 spoons to like hit/drum the screens so the trichomes get seperated by size. i felt like the screens got clogged at some point so i stopped and was like yea thats okay enough lets go to the next step, collecting everything and pressing. the first layer 190+ got discarded. layer 190-160 got saved as well as layer 73-160. everything below the last screen got destroyed by my own mistake. the tape i used to secure the parchment paper on a plank ripped and everything went flying. well i wanted to discard it anyways.. after the sifting screens i used the frenchy cannoli methode with a hot water bottle to press the trichomes to some nice hash. the results: 190-160 micron: 12,4 G 73-160 micron: 32,2 G Total: 44,6 G fully legal here :) im very happy with the results, even tho the hash is a bit green. after all it was my first time doing it like that. i feel like i need to dry it a bit more next time. so the screens aint clogged and thus i can better seperate the trichomes, maybe it is less green then. maybe next time im not using the big sifting screens but rather go for some static with a glove or a ballon.
Likes
89
Share
@nonick123
Follow
Dia 20 (05/02) Han pasado 8 días desde el ultimo riego. El sustrato de PRO-MIX HP se encuentra esponjoso al tacto a pesar de que está seca la parte superior Riego 1 Litro H20 + Wholly Base 1,25 ml/l + Solid Green 0,5 ml/l + Rise Up 1 ml/l de Gen1:11 - pH 6,23 TDS 660 PPMs Día 22 (07/02) Vamos a probar a hacer este ciclo con LST Día 23 (08/02) A +24 horas la planta ha reaccionado muy bien al LST. Se han estirado las ramas inferiores y la rama apical se sigue estirando Día 25 (10/02) Sigo con ajustes de LST para abrir la canopia. La planta está reaccionando con mucho vigor 😍💥 Este día añado a la carpa el sistema TrolMaster TCS-1 Tent-X Día 26 (11/02). Riego 1 Litro H20 + Wholly Base 1,5 ml/l + Solid Green 0,75 ml/l + Rise Up 1,25 ml/l de Gen1:11 TDS 780 PPMs - pH 6,36 (mínimo ajuste con pH+ para subirlo desde 6,2) La planta avanza vigorosa. En una semana pasamos a 12/12 😁 Nutrients by Gen1:11 - www.genoneeleven.com Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1
Likes
19
Share
Screw the stretch then. Full spectrum lighting from the top, the blue & red emitting from the "full spectrum" light only penetrates 1-2 layers of the leaf, the green wavelength will penetrate 4,5,6 layers, and the best ratio for flower growth is 1/2/1 R/B/G, and very little of the red and blue reaching lower parts of the plants or even the sides, flowers on lower parts of canopy receiving a majority of green will grow larf style buds, often lackluster, I supplement blue and red at the sides, I do not want to add more "full spectrum" this would double dose the green which penetrates deep. By the end of week, I'm looking at bud sites everywhere, the density is exceptional and above what i'm come to expect in week 1.5, it was the like plant skipped the stretch and went right to bud site production.
Likes
16
Share
Alright grow cycle, mistakes, improvements, etc... She did stay in veg for too long, her growth was slow and not the best and so she took quite long, next time i'll be there from the beginning so I can take care of her throughout. But her growth is really fun. It is a tall growing sativa with fairly tight noding when trained accordingly, producing long filled colas. The buds grow fairly dense and fluffly but do air out a little when dried. Trichome production was pretty impressive as well as terpene production. She had thrips since her early days but did not seem to mind them at all. I did spray them initially but once flower started I stopped. I believe predatory mites might have been feeding on the pupae in the soil, if that is what this specific species of thrips did, the reason I say that is I could never see adults only larvae. Whatever the case maybe they were there but the population never really increased. Something I did not mention during the grow is that those plants were played music during the days, music that is apparently developed for plants. The 10L pot was WAY too small for a true sustainable living organic and to provide enough space for the plant, that was a mistake, I'd say a 20L would be the bare minimum and still. The bigger the better. The hempy transfer did not hurt the plant and I believe even helped to some extent, BUT, I am still running test on the subject and so can't confirm anything, here are my observations Roots did not colonize the perlite, a little on top and the sides but that was it, I was expecting to see a big root mass in there. I believe hempy are great for salt fert as it hold a soup of nutes where the plant can feed from since the coco only holds very little Whereas in nature most nutrient are in the top soil where the highest amount of decomposition happens, this is where the highest microbial activity happens and so where the plant will find food. Living organic is trying to reproduce nature and so there is no need for the plant's roots to gather at the bottom of the pot. Although it could have potentially provided the plant access to a larger amount of water and possibly more oxygenation of the pot. Those are all theories, please speak up if you have other proofs. In conclusion , unless i get proven otherwise by someone or my latest running experiment , I will not be using hempies again as I believe it brings more complication and issues than a simple fabric pot. The lights, The 600w at the start was good, then I decided to add a 400w...😂 That was completely overkill and not necessary. Waste of electricity. And they started suffering from too much light it seems at some point, I raised the light by a good 30 cm and they were fine. 600 is more than enough. I am happy about how the soil performed but it has room for improvements. As for the watering technique I have been watering large ammount every few days, next time I will be giving constant small amount of water each day and a soak every week or so, I believe the soil might perform better under those conditions. She was also an easy plant to harvest whit her long colas which had very little foliage, I do trim in excess as I like my buds extra clean but the buds are not excessively bushy. The trims were use to make some bubble hash, around 100g of wet trims yielded around 1.5-2g of bubble hash. I did add a negative effect but only because it wouldn't give me a smile otherwise, but to be honnest it barely dries your mouth. The soil is going to be recycled and reused in a next grow. I can't think of anything else at the moment but if you have any question don't hesitate.
Processing
Likes
3
Share
Got hit by a severe heatwave this week! Temps reached 104 in the grow tent even with the lights off and fans at full blast. Threw some ice in front of a fan to help but it was not enough. Also doesn't help I went one day over when I would normally water them. First day of reasonable weather today. Plants seemed sad and droopy for a day, luckily after feeding they perked right back up. Defoliated slightly this week. Will definitely NEED air conditioning moving forward. Aside from that, the odor these two are creating is already mesmerizing. Best I can describe the smell so far is, a mixture of sweet pineyness with a light pungent funky undertone. Can't wait to switch to flower in a few days! Going to be flushing both plants this Sunday 05/31.
Likes
6
Share
Getting fat. Minor powdery mildew, starting night dehumidifier this week. Still aiming for 3 lbs dry bud. Ww x gdp from last years seed project.
Likes
11
Share
Hi liebe Community and Welcome Back! 💚 beim ersten Tetraploidgrow meinerseits. Die Pflanze hat von Beginn an einen guten Start hingelegt und sieht richtig Vital und Munter aus 😉 Nach der dritten Wachstumswoche, sehen wir eng anliegende Seitentriebe und einen ziemlich rasanten Wuchs. Die Pflanze geht auch ziemlich rasch in die Breite und bildet große und Breite Blätter aus. Sie geht schonmal richtig in die Breite und wirkt irgendwie Vitaler und kompakter als andere. Ist aber Mal nur rein Subjektiv. Die Bedingungen im Growschrank sind Top! ————— 🌞 Temp: 21 🌚 Temp: 18°C bis 19°C 💨 RH: 58% VPD: 0,75 kPa 💡ppfd: 330 mpm —————
Likes
141
Share
@Eyeduno
Follow
A week from last not much change to be honest
Likes
6
Share
Muy buenas familia damos cimiento a la 3° semana no es por que sean mías pero estas muy lindas 🤣🤣🤣🤣🤣pues na familia contarles q después del trasplante le e regado con rootfast y en el siguiente riego sólo agua con un pH 6 con el humidificador estoy entre los 70 y 75% de humedad ahora como todavía esta un poco frío donde vivo la temperatura ronda entre 20 y 21° c y pues nada familia muy contento jeje en este iré subiendo más fotos y más videos de las hojas tallos y de todo para que lo vean mejor y me puedan ayudar con consejos y tips para mejorar en cada cultivo muchas gracias por sus visitas familia un abrazo muy fuerte nos vemos la semana que viene buenos humos paz familia
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 😻 We did our typical 3rd week defoliation earlier and managed to pull a few cuttings from each plant to clone...Bud sites are becoming way more prominent this week and all plants are praying hard to the MarsHydro. We've increased bloom nutrients and they seem to be responding well to it.. color is great, we couldn't be happier and with how things are going..we intend on dropping the MarsHydro a few inches today and will update any changes midweek..thanks as always for dropping by and happy harvests everyone!!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 03/09/23 We increased bloom nutrients again (10ml/gal), they're eating with every watering now (4th water only).. these happy trees are praying hard to the MarsHydro!!😻 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
2
Share
@RFarm21
Follow
18/12 - Harvest Day! One is very big and the otther is a miniature...i would love to master this One day 🤣
Likes
74
Share
@squalino
Follow
Journal de Culture : Givre 1 - Babouch (Semaine 9) ​Génétique : Frostbanger (F2 Perso) | Système : Autopot 20L (Géré en manuel pour le rinçage) ​📣 Remerciements ​Un immense merci à toutes les personnes qui suivent ce journal depuis le début ! Un grand merci en particulier à @MIA_BIOTABS et à Mrs_Larimar pour leurs précieux conseils toujours aussi utiles. Merci à tous pour votre soutien ! 🛠️ Configuration Technique ​Éclairage : Lumatek ATS 300W Pro (réglé à 100% pour le sprint final) ​Distance lampe/canopée : 50 cm ​Climat : Jour : 25°C / Nuit : 21°C ​Humidité (HR) : 50% (gérée par le déshumidificateur) ​Tente : 1m80 de hauteur ​📅Évolution & Fin de Floraison : Hier dernier repas PK et top départ pour un rinçage de 14 jours minimum ! État de la plante & Structure des bourgeons : ​Hauteur actuelle : 84 cm (la taille reste inchangée, toute l'énergie va dans les fleurs). ​Morphologie des têtes : Les bourgeons continuent de gonfler d'une manière assez unique avec cette petite couleur rosée. J'ai l'impression qu'elle pousse "en épis de blé", une structure de floraison très intéressante, même si ce phénomène est un peu moins prononcé sur Babouch que sur sa sœur Dora. Trichomes : À l'observation, la plupart des trichomes sont désormais bien laiteux. C'est le signal parfait que j'attendais pour lancer la dernière ligne droite. Nutrition et stratégie (Le grand nettoyage en mode manuel) : Dernier apport : J'ai donné hier ce qui sera normalement son tout dernier apport en PK 5-8 Biotabs. Gestion du système : Pour cette phase cruciale, j'ai bien coupé le système Autopot et je bascule en mode arrosage manuel. Cela va me permettre de contrôler précisément la quantité d'eau claire apportée et de bien laisser le substrat respirer entre deux arrosages. Objectif Rinçage : À partir de maintenant, Babouch passe uniquement à l'eau claire pour une période de 14 jours minimum. Le but est de couper complètement les vies pour la forcer à puiser au maximum dans ses propres réserves stockées dans les grandes feuilles, et ainsi déclencher une vraie et belle sénescence d'ici la coupe. Résumé visuel : Avec la lampe poussée à 100%, la production de résine s'intensifie et les têtes scintillantes sous les LED. Les calices continuent de s'empiler magnifiquement, et malgré sa structure de feuilles encore bien vertes et vigoureuses, le démarrage du rinçage va doucement commencer à faire pâlir la demoiselle. L'odeur dans la tente est toujours aussi redoutable. ​À bientôt pour suivre l'évolution ❤️❤️
Likes
10
Share
På tre dage er hun gået fra lidt sky farvet til fuld mælkefarve i krystallerne. Jeg høstede hende igår, men jeg håber det bliver nogenlunde billeder alligevel 💚☮️🤞😇kan virkelig anbefales andre at prøve denne sindssyg smukke strain!☮️💚
Processing
Likes
16
Share
Ready to harvest soon! Those colors are amazing! Never seen that in this color