Likes
Comments
Share
Over all + Speed Auto is doing well. Seemed a bit slow taking off but she is progressing nicely. Had (1) seedling that completely stalled out. I went ahead and germinated another bean which was placed in soil (germinated tap root about 2 inches long) 5/18. Day 7: + Speed Auto showing second leaves coming in. Still slightly yellow, might be hungry or slightly over-watered. Will feed nutes in the next few days and see. Temp: 75º RH 75% PPFD: 300 VPD: .41 kPa Day 8: Just misting no water or nutes yet. Looking good. Temp: 75º RH 75% PPFD: 300 VPD: .41 kPa Day 9: Fed 2ml Cal-Mag, 2 ml FloraMicro, 1ml FlorGro, 1ml FloraBloom PH 6.2. Temp: 75º RH 70% PPFD: 400 VPD: .72 kPa Day 10: Responging well to nutes. Looking much darker green today, must have been hungry for nutes. Temp: 70º RH 75% PPFD: 400 VPD: .72 kPa Day 11/: Growing and looking darker green today. New leaf growth. Replanted new + Speed Auto in 3 gallon pot. ProMix HP. Temp: 77º RH 55% PPFD: 500 VPD: .67 kPa Day 12/Day 1: +Speed looking healthy. New seedling popped/ Day 1 under humidity dome (Gatorade bottle cut in half). Temp: 73º RH 62% PPFD: 500 VPD: .67 kPa Day 13/Day 2: New leaf growth. + Speed seedling coming along. Temp: 75º RH 60% PPFD: 500 VPD: .62 kPa Day 14/Day 3: New leaf growth. Fed 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom and 2ml CalMag. Seedling got spritzed/sprayed and left humidity dome in place. Roughly 1" tall with first leaves coming in. Seems to be doing better without rapid rooter start. Temp: 78º RH 61% PPFD: 500 VPD: .76 kPa
Likes
Comments
Share
a little bit of leafburn on the left lady... unfortunatly.. but she'll push through!
Likes
30
Share
Just humming along now. The smell is so amazing and unique. I was under impressed with this plant at first, but the frost and terps are changing my mind. Very unique sweet m, candy/floral with a hint of gas. Can’t wait! ✌️💚🌿💨
Likes
567
Share
MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA So it's been 17 days under the new MARS HYDRO FC4800 and the TSW2000 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. Its the NEW blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I'm in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. I CANT BELIEVE the amount of crystals the plants have already🤘 they just started getting bigger hair clumps and I didn't expect to see this much already👍 awesome lights do an awesome job. So it's looking good for these strains I made👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll Instagram: @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll Instagram: @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll Instagram: @marshydropenny Happy growing to all my friends 🤜🤛
Likes
2
Share
Getting super fat, calyx's have started turning a bit purple. Was concerned it was bud rot, inspected with jewelers loupe. Seems fine, will watch closely. I have cloudy trichromes, no ambers yet.
Likes
8
Share
@MistaOC
Follow
Grow Diary – Day 79 (Flowering Day 59) Strain: Sour Frootz by Karma Genetics Plants: 4 clones Training: HST + SCROG Nutrients: Flushing – pH-adjusted water only Lighting: LED at 50% intensity Date: May 30 Status: Final flush in progress – harvest slightly delayed Today marks Flowering Day 59, and the Sour Frootz are now well into the ripening phase. For the past three days, only pH-adjusted water has been given, initiating the flush phase. At this point, the nutrients in the soil are nearly depleted, and the plants are naturally drawing on internal reserves—visible through gradual leaf yellowing and fade. The plants are approaching ideal harvest maturity. The delay in harvest by a few days allows more amber to develop and maximizes terpene maturity without compromising overall quality. Lighting Conditions: • The LED is currently running at 50% power to gently finish the ripening process while minimizing light stress and preserving essential oils during these final days. Plant Observations: • Buds are hard, resinous, and aromatic • Strong sour/citrus funk intensifies with every day • Natural senescence is occurring – older fan leaves fading evenly • No nutrient deficiencies or toxicity present • Humidity stable around 50%, airflow is optimal • No signs of mold or late-stage issues Outlook: Harvest is likely to occur within the next 3–5 days, depending on final trichome checks and desired effect. You’re in the home stretch now, with flavor and resin peaking. Continuing to monitor closely for optimal harvest timing is key from here.
Likes
15
Share
@valiotoro
Follow
Hello everyone 👋 Week 1 has passed She’s doing very well growing at fast pace with a beautiful green color on the leaves🔥 For the nutrient 1/2 plagron terra grow & B.A.C foliar spray 4ml/L once a week💦 See you next weed😎
Likes
150
Share
Hi, everybody. Well, that's the long-awaited day of harvest Bubblelicious Auto. First of all, I want to thank all those who supported me during this time, your support gave me a lot, and also gave me the motivation to do better and more beautiful. 👏 You know what I have encountered problems with smell when growing this marijuana strain because of considerations of privacy and personal security, I couldn't give extra days of life to these plants. So I made a harvest for the 70th day of life of these plants, exactly 10 weeks. When I harvested, I had to move the inflorescences to another place to dry. I put their Bank and Packed in several layers of garbage bag and tightly sealed it with sticky tape. When I came home, I dried the inflorescences, and I prefer to separate the inflorescences from the large branches, and the inflorescences themselves slightly pressed to make them easier to store and they do not crumble during transportation. So the inflorescences are obtained dense and hard as a tree, but do not lose their smell and taste, but the inflorescence should be compressed very gently and gently for several days as they dry. In General I'm okay and I'm safe. The final product gives me pleasure, so I think that my risk was justified. Now in my tent matured 3 plantsNeville Haze Auto. I'm not going to stop, I'm planning to keep growing. However, due to force majeure and weather conditions, my idea of guerrilla cannabis cultivation is at risk. So I don't know what's next. But in any case, soon there will be new interesting diaries. Now my friend has 23 plants for the first week. 10 days. we urgently need to relocate them to new homes or to the outdoor. In General, add to the followers, follow my diaries, it will be interesting.
Likes
21
Share
@AutoCrazy
Follow
Week 9 This week has been fairly busy in the tent. I have defoliated a couple of times and there has been a lot of tying the plant down. I also connected all my top off lines and drain lines. The top of my tent was a bit of a mess with cords and cables etc so I cleaned that rats nest up and that gave me the warm and fuzzies when I was done lol. I raised my lights up to where I hope to flower so that way the plant can grow up into the lights when the stretch hits. I have not reached 16 tops yet but I will be topping in the next few days so I am very close to the desired number of tops. I have not changed anything inside the cooler either. It’s the same ppm, pH etc as last week. I love how healthy this plant is even though I have not done a water change in 9 weeks lol. That’s blasphemy is some circles lol. 😎🌱🍻
Likes
23
Share
@GrowGuy97
Follow
Wish the buds would have got a little bigger but feel like that’s particularly my fault for a short Veg but overall I am blow away by the outcome for all the seeds to just be random bag seeds! 2 of the plants are drying now 3rd one will be cut tomorrow & the other 2 got probably 2 more weeks! Will do a taste & smoke report and also give a weight as soon as they dry & cure a little bit but honestly couldn’t be happier with my first grow! Thanks for all the support & help along the way & happy growing friends!🤙🏼✌️🏼🌱 Update on 1st plant - dry weight 42g, still smelled pretty Earthy when I put it in the jar but the smell is definitely coming out now, extremely sticky & frosty buds❄️: 1:🏼🙏🏼 Update - plant 2 Dry weight was 40 grams! Extremely happy with the out come this is honestly some of the best bud I have ever smoked! Amazing to me this came from a random bag seed, it has a very citrusy flavor, smells & smokes amazing! Honestly a 10/10 in my book, wish I could knew what strain this was so I could grow it again!😫❄️✌️🏼🌱 Update - plant 3 Dry weight 34g, smells & look phenomenal, the buds are much smaller & had the smallest yield so far but this is by far the best smelling so far! Will have a smoke update on this one soon, stay tuned friends & happy growing!✌️🏼🌱 Update - plant 5 dry weight was 52g it dried a little faster than plant 4 which I will probably jar tomorrow! Will update again with a smoke report soon, this plant brought my total so far up to 168 off 4 plants👍🏼 Thanks for following friends & happy growing! Also the butter I made from the trim was 🔥🔥
Likes
15
Share
@MG2009
Follow
02/23/2021 Gonna get more clones off bottom growth she seems to clone easily enough. So maybe mid-week topping, after cuttings. She is growing fast!
Processing
Likes
7
Share
Beautiful pair of phenos of Badaz og cheese very excited about what strain is gonna offer me in terms of quality buds, so excited to see what is every of this 2 phenos gonna be like, I really hope that both of them have the exact terpenes profile and the same potency! Let's keep on working! We'll the ladies have been Transplanted on February 2nd after 17 days since planted, they were very big and the pot was completely conquered by strong roots as you can see, now both of them are in their new 11l pot home let's see how they keep developing! 💛❤️💚🔝💎
Likes
1
Share
@gr3g4l
Follow
Esta semana es la última de las Mack&Crack, llevan ya varios riegos con agua sola, están mas que lavadas.
Likes
4
Share
Good week, I think I am done tucking the scrog for this run, screen has filled out reasonably well and am happy with all the room variables. I did add some beneficial bacteria as my ph spiked a few times and my res tank felt a little slimy.. so fingers crossed that takes care of that.
Likes
7
Share
@Naujas
Follow
well, it's exactly 12 weeks :) and my house is full of lemon aroma :) the girl endured really difficult growth, but she coped with everything perfectly :) who followed the growth, you saw that she grew on the balcony for 10 weeks, and she spent the last 2 in the grow tent :) 500 gr wet weight !!!!:) , before putting it in the ground I expected less than 10 g dry yield :D then this growth turned out super well, if it wasn't for my vacation I would have let it grow for about 2 weeks I think. but everything is still very good, I'll go home, fix it and do a smoke review :).