Fed once this week with a weak feed including top max. I use kombucha vinegar as pH down. Water from my tap is ph6.8-7.0 and 38-42ppm so I might start using calmag supliment as the ppm at my old house used to come out of the tap at ph7. 2 and 200-220ppm. I had 2 plants that didn't like the light at 30000 lux and started bleaching so I took them out. I've defoliated today day 35 as humidity was getting over 80% and also to let light to the lower bud sights. Pre flower pistils showed on some plants around day 33 (some still have none) so I'll consider this the end of veg start of flower. The kalimist indica pheno is still not showing pre flower pistils but is always hard to force flowering when it's not mature for some reason. It's always 7-14 days behind everything else 🤔

She just has massive leaves shading stuff out so had to massive prune I didn't want to train her cuz I'm training every other auto out I wana see what does better trained or non trained I've been using bud clips from bud trainer to do training it's been awesome I haven't used them on this cultivar jus some garden wire tune in to the podcast on youtube @sundaesesh

These are doin pretty good. The 2 mac x's are doing the best and look promising. The rocstar breath and purple candy paint are a little smaller but doing well. Added some TNB co2 to give them a boost.

Starting uv-b light

she only small cant wait to smoke it

New week of flowering for CBD SPLIFF BERRY Doing nicely @spliffseeds deliver again a great strain 👌🏻 did Les LST to this one compare to Afghani Gold but made sure the lower stuff gone also make sure less popcorn can pop up. I am not sure if ever smoke a 50/50 THC/CBD strain but will see 👀 Happy growings Growmies see you next week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

🌿 Woche 4 🌱 Wachstum & Training 🌱 Es war an der Zeit, das Training zu beginnen. 🔧🌱 Der Plan ist, sie so symmetrisch runterzubinden, dass ich die allermeisten Triebe auf einer Höhe habe. 📏 Ich hoffe, dass sie sich nicht zu sehr in die Quere kommen – und alle Triebe wieder schön hochkommen. 🌞🌿 Ein kleiner Bruch ist mir dann doch passiert. 😬✂️ Bin aber guter Dinge, dass das wieder wird. 💪🌱 Hier und da musste auch wieder gut entlaubt werden. 🍃✂️ Ich fahre gerade so etwa 300 PPFD und werde es nur langsam erhöhen. 📉💡 Somit sollten die Triebe immer wieder nach Licht streben – und hochkommen. 🔝🌞 💧 Blumat & Gießen 💧 Ich gieße weiter nach Fahrplan: 🕒 Alle Paar Tage bei 110 mbar 🚿 2 l Wasser ☀️ Wetter 🌞 Kurzzeitig waren die Temperaturen wieder fast normal warm – so 26 °C. 😌🌤️ Aber ging dann wieder Richtung 30 °C und mehr ... 🔥 🎶 The Grow must go on! 🌱🎵

Day 57. And Mimosas are real sl@ts ..... No doubts, they all time were most picky and stupid, but big, very big ... Only two from 3. Last one is the smallest plant from all first wave. Very strange . Smoothie's are nice, grow without big hiccups, maybe a bit of a runners, but all 3 looks very similar. Purple Punch - both small, the one in best light is giving me hope that I will chop her before holidays and will make some space for the guy who will be watering them during my offs. They are overfed a bit. So no feed all week. Just water. Two biggest Mimosa's will be transplanted into bigger pots, they drink a lot, dry too quick and are sad in my mind, so I will cheer them up with bigger pots this week. Still selective defoliation, some yo-yo, so ties and no spray anymore. Smell is getting stronger, but didn't bother to try one or other. Still nothing special or super smelly yet ... In the middle of the day Mimosa's finally happy, but before lights down - theirs leaves are down too. Overdrying them constantly too, can't wait to give them better house, that type of fight I hate. Day 60. All work done ! Huge work ! All girls were cleaned, defoliated and pots toped up with BioBizz Worm Castings. Both Mimosas got new bigger pots too. Happy Growing !!!

Flushing chopping tomorrow

Going into flush this week for 2 week shes fattend up nicely and begun maturing ph water at 6.0 with terpinator thanks for reading happy growing guys

This will be the start of week #2 of seedling stage. Had an issue 😢 with my blue dream plant I believe I’ve might of over watered . It looks bad hopefully it can recover. Yield may be stunted really lagging behind. Also I have another blue dream seed so I’m thinking of starting that one fresh so I can pot into the finale medium. I didn’t want to use the cup but didn’t have enough soil at the time 🤷‍♂️ The strawberry 🍓 banana 🍌 auto and the power plant fem seems to be doing good 👍 so far. All in all I’m happy 😊 with how things have been going throughout my grow . I’ll will be feeding my plants nutrients and dropping the lights 💡 for the start of Veg next week. Let’s goooo… 😎😏

week 5 of MD XXL flowering 😎 2 of the yellowing unhealthy plants are recovering after all, i wonder if they will get as nice as the one which did good from the start but well see. At least i can see some trichome forming on the 2 yellowed plants so with still a couple of weeks left i hope they recover. Not realy much more going on, im getting the hang of giving water, i just wait and lift my pots to feel if they need water or not, they usualy get a watering each 1.5-2 days 👍 Also temperatures around here are alot more bearable now so thats good.

Flowers got really dense like bricks, also the lower ones. Felt like starting the flush at the point I’m at to have the cleanest smoke possible. Have around 2 weeks to go, or till i have strong yellowing. Flushing with terpinator, flowers still getting bigger.

11/3 - Today is technically the first day of Week 5 and also the first day I could see a visible drop in her water level since her last check-in (~12 hours apart). As a result, her ppms shot up to around 800. I diluted the solution with straight tap (7.5pH, 170ppm) since her pH was registering around 5.3. This brought her up to 5.6pH and 670ppm (1.0ec + tap, 500ppm of nutrients). I would have liked to adjust her pH more, but the water level ended up at the bottom of the basket. I'll adjust further as necessary. The other day while attempting to LST her top branches, they ended up snapping off, so I just topped her down one node and broadened her other LST to make her as squat as possible. Once I am able to find a suitable individual ScrOG screen, I will put it on her. 11/4 - I wasn't even planning on doing an update today, but I want to note a few changes. The first of which is a visible difference between her foliage density in a span of 36 hours. Her root bundle is over a foot long and getting more wound up every day. I removed her LST ties in order to take advantage of the ScrOG screen apparatus (see notes below). After lights came back on, she measured 645ppm and had another notable drop in water level. Currently, I am preparing another nutrient solution that closely matches what she is feeding on now. I will be upgrading her to a 5 gallon bucket. I will be aiming for 1ec of nutrients/additives (500ppm + Tap on my meter, Hanna Primo .5 conversion). Tap measured 180ppm, so target ppm would be 680. Later that same day... So I finished upgrading her to a 5 gallon bucket before I actually got done writing the update. Added one photo showing new 5 gallon setup. Solo ScrOG test mk1 - In an attempt to do a ScrOG, but maintain control over each bucket, while still having relatively easy access to each reservoir, I decided to throw together this little contraption. I removed the lowest complete segment of a tomato cage, leaving a short "tail" beyond the lower ring to act as a peg to insert into corresponding holes in the lid. The lower ring is 10" in diameter and the upper is approximately 12" in diameter. Each ring is 11" apart. I would prefer to have a shorter segment, but I haven't worked out exactly how to do this yet. I would prefer to set the screen height at around 6" above the bucket instead of 11". This will have to suffice for the time being while I let my latent conscious work out a solution or one is provided by the community. Above each cage will sit a coated wire fence with grids measuring ~2"x3", as shown in the above picture. 11/5 - Uploaded short video showing Solo ScrOG Apparatus in place. Screen height currently set to 6". Thanks for stopping by my garden, and, as always, Happy Growing!

Everything seems fine but seems like things are starting to slow down so I decided to feed plain ph'd Water the last 2 feeds will be continuing with normal nutrients solution again I have 3x strawberry stardawg which all still have White pistols 2x critical jack which has 60% amber pistols 1x strawberry diesel 40% amber pistols and 1 somango all white will try post pictures soon p

hi friends with green thumbs grapefruit is starting to thicken in flowers and leaves. let's see how much production can still increase

Bending leafs waiting for her to flower, a little bunt tips from feeding last night

What a journey. Chopped on day 152 from seed. (21.7 weeks) Spent 12 days drying and produced 50.2 grams (1.79 ounces) of buds *Not counting larfy buds Time for curing now.