They have really taken off.

Uploaded a video which explains everything 👍🏾................................................................................................!

This week has been good for this group girls, they are awaiting room to get moved into 1 gallon pots. In the next couple days will fill up flower 1 and the room will have more space. These girls love their environment they are constantly happy plants. Just all standing their proud! 💧: They recieve about 125 ml of food every 2 days like clock ⏰️ work. Keep the ph around 5.6-5.7 and they all just seem toblove it. Stay up

I can't wait to smoke it

I tried to move a couple plants over to the smaller tent to get a little more air circulation in there because I had only a passive air intake. With this many plants in this space I didn't think they're getting quite enough fresh air. But upon moving them over to the tent the light even at the highest position slightly started light bleaching the tops of a few plants. So I then moved them back to this bigger grow space and bought an intake fan. The Zkittlez are fighting me the whole way, I don't know if she likes to be cloned or not. Only the Zkittlez often seem to look a little sad even with everything dialed in for them.

in ppm 800 ph 7,2 out ppm 2200 ph 5,8 Pots 40cm Satori 50cm Blueberry 35cm Height from floor to light source 1m 25cm

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

D76 - 14 DECEMBER Well, unfortunately once again I had mold problems. Had to chop her early so I´ll trim and hang her to dry today. D90 - 28 DECEMBER Exactly 2 weeks later and the buds are all nice and dry, everything put to cure now with Boveda 58% humidity control packs. The medium-tiny and very tiny buds weighed at 15.1 grams and the medium to big sized nugs weighed at 33.2 totalizing at 48.3 grams. I´m happy with the result, I thought it would be worse. Let´s see how she goes into curing now! 29 JANUARY Finally, after a proper 30 days cure I´ll be doing the strain review. Thank you so much for taking some time to check my diary out. Special thanks to RQS for the seeds, nutrients, pot and some sick merch. Stay safe and peace everyone ✌️

Been SUPER busy and have had a hard time keeping up with everything. The video was from a few days ago, I don't think I was watering enough. Shes growing nonetheless, and ill be starting liquid nutes this week

Day 57. Watering with clean water. The light schedule has been changed (12x12). Replaced lamp. Day 58. Watering with fertilizers. Day 59. Watering with clean water. Day 60. Watering with fertilizers. Day 61. Watering with clean water. Day 62. Watering with fertilizers. Day 63. Watering with clean water.

They got so tall over the last few weeks im hoping for the best :D Also did some defoliation to get the lower bud sites off and to help the air flow Date: 20.8.2024

And that completes my grow for my FastBuds420 grow Truly was a fun and exhilarating experience learned a lot about each, and every strain would absolutely grow each and one of them again, but photos are in the future. Can’t wait to get my hands on a pack of those fast.buds Photo.

This was the ladies last week! I’ve been watching the tricomes, #1 is mostly cloudy with a touch of amber, # 2 could go just a bit longer as there are mostly cloudy with a few amber and some clear… but I have a schedule to keep to make tent space available. Fed the ladies straight ph’d water for 4 feeds, being sooooo hot they have been needing water every other day, which turned out perfect! Super happy with the smells so far, typical Kush with a very pleasing earthy aroma 🤤 Into my 2x4 AC infinity controlled tent for hopefully a 10 day slow dry @ 60% RH. It’s been so dang hot, temps in my basement with AC are still hovering around 72 degrees!

"Hi, I received my pH meter this week, so from week 6 onwards, I'm aiming for a pH value of 6.0 - 6.5. This week, I noticed that the plant in the small pot received too much fertilizer. The other two 7.5-liter fabric pots also received double the recommended amount according to the feeding schedule, but they don't show any signs of over-fertilization."

Plant is looking great so far I had to flush it 2 days ago to readjust my run off water ph

At a total of 79 days this Sangria is a beautiful one! A cross between The GOGO and Ogreberry she is super delightful, Dense resiny heavy covers trichome buds , with the smell of Gassy rotten fruit funk on the nose! She a stanky one ! Other then that she was a pretty easy grow , y’all don’t sleep on it an better get your hands on it , at @Twenty20Mendocino they got you covered

Hey there, green warriors and cannabis enthusiasts! 🌱✨ We’ve made it to week 10 of flowering with our incredible Runtz F1, and the anticipation is at an all-time high. This week has been all about those final touches—letting the plants reach their absolute peak before the big harvest. The Runtz F1 has truly outdone herself, and now she’s just about ready to show us everything she’s got. Let’s dive into what’s been happening during this critical final week of flowering. Week 10 Flowering Progress 🌿🌟 This final week of flowering has been a masterpiece in slow, steady ripening. Here’s what’s been happening with our star plant: • Bud Development 🌸: • The buds have reached their maximum size and density, with each cola a solid mass of sticky, resin-coated goodness. The trichomes are so thick that they give the buds a frosty, almost white appearance, making them look like they’re covered in a blanket of snow. The compact nature of the Runtz F1 has resulted in some of the most beautiful buds we’ve seen this grow. • Trichome Maturity 🔬✨: • This week, the trichomes have matured beautifully, with a perfect blend of milky and amber colors. The ratio has tipped slightly more toward amber, indicating that the cannabinoids are fully developed and the plant is ready to deliver a potent, well-rounded high. This balance ensures that the effects will be both uplifting and deeply relaxing—exactly what we’re looking for in this strain. • Aroma and Terpene Profile 🌿🌸: • The aroma in the grow room has hit its peak, filling the space with an intoxicating blend of sweet, fruity, and gassy notes. The terpene profile is fully expressed, promising a flavorful smoke that’s as complex as it is enjoyable. This final week has really brought out the best in the Runtz F1’s aroma, making it clear that we’re in for a treat once these buds are cured. Final Preparations Before Harvest 🌾✂️ With the buds fully matured, this week has been all about the final touches to ensure everything is just right for the upcoming harvest: • Continued Flushing 🚰: • We continued with the flush, ensuring that any remaining nutrients were cleared out, leaving behind clean, pure buds. The plants have responded beautifully, with the fan leaves fading as the buds take on their final form. This step is crucial to ensure that the smoke is smooth and the flavors are pure, free from any lingering harshness. • Environmental Control 📊: • Maintaining a stable environment has been key this week. We’ve kept a close eye on temperature and humidity, making sure everything stayed within optimal ranges to prevent any last-minute issues like mold or mildew. The plants have been in a perfectly balanced environment, allowing them to finish strong. Anticipation for Harvest 🌱💚 As we reach the end of week 10, the Runtz F1 is in the best possible position for harvest. The buds are bursting with potency, the aroma is at its peak, and the trichomes are telling us it’s time. However, we’re holding off just a bit longer, making sure that every aspect of the plant is fully ready before we take the final step. The excitement is real, and the anticipation is almost overwhelming. We’re just days away from harvest, and everything is set for an incredible finish. The Runtz F1 has been a dream to grow, and we can’t wait to see what the final product will bring. Stay tuned for the harvest report, where we’ll take you through the final steps and celebrate the culmination of this amazing journey! 🌟💚 #RuntzF1 #Week10Flower #CannabisCommunity #GrowStrong #FinalTouches #StayPositive #GreenMagic

Die gelben Blattspitzen haben sich vom 12.10-18.10.24 sehr vermehrt. Betroffen sind nur die jungen Blätter, spitzen sind stark sichtbar gelb geworden. Ph-Wert beträgt aktuell 7.0. Ich werde der Pflanze keinen Dünger mehr geben. Ph-Wert vom Wasser wird auf natürliche Weise gesenkt, um die Erde durchzuspülen.

12/5 They're starting to get taller and develope more leaves. The gorilla zkittlez has some weird markings on its leaves. I don't think it's something I need to worry about because the plant seems healthy but it's worth noting.