so... was of to any awesome start to the week topped them and started low stress training but at the end off all of it.... my torque got caught on the wire and she got more of a topping then planned thats for sure!!! ill just let here go for gold now leave her be.. had bad root rot and the only thing i can get in Australia is root stop unless someone knows something better..... i soaked the two dwc in the root stop substance for 4-8 hours... it seems to have lightened the root colours. i decided to cut the one that had root rot bad and cleaned and prepared it to transplant it to coco...

Week 12: Tangie Finish Line in sight Today, I checked Tangie’s trichomes and noticed that 20% have already turned amber. This signals that it’s time for a flush. I’m using pH-balanced water (pH 6) with an EC of just 0.092 ms/cm due to my extremely soft water. My goal is to stress Tangie a bit in these final days to boost trichome production. I plan to remove some fan leaves two days before harvest and let the soil dry out slightly. She has about 4-5 more days to go. The aroma has become incredibly strong, with a vibrant, fruity scent dominating the air. It’s amazing how much more potent this smell is compared to the pre-harvested buds, which are now in the curing process and beginning to release that delightful orange and citrus fragrance. I’m eager to compare the flavor, potency, and high between the early and late harvests. The finish line is definitely in sight and I'm happy that I could let her ripen entirely to she what she is capable of 😍 Update 17.08 (Day 82) Today I decided to finally harvest the rest of this lovely Tangie. The trichomes showed a good mix of amber and cloudy trichomes, and I don't want to risk letting her overripen. I opted to cut only the fan leaves again to ensure a slow and consistent drying process. So far, so good, my friends—everything good must come to an end. Check out my harvest report of my Tangie lady for details on the yield, strain characteristics, and, of course, the smoke report. What's left to say? I want to extend a heartfelt thank you to all of you for joining me on this incredible and educational journey ♥️ Reaching nearly 2,000 views on my first diary is something I never expected, and it’s all thanks to your support. A special shoutout to Fast Buds for launching this contest—it gave me the motivation to share my experience—and for the outstanding strains you’ve brought to life. You are the best, guys. 💪🏽

Final Report: Grow: The plants has grown very beautiful and healty without pests and diseases. They grown bushy and with medium height during the vegetative stage. I had try to use LST in third veg week but i did't made correctly and after that i dicided to return to grown normally without any particolar tecnique. I used a littel more fertilizer then mine usual and that made the plants grown fast without any problem. In the first two weeks of flowering stage the plants started grow taller and the number of the branches increase, in this phase i only defoliated when the fan leaves turn yellow in late stage. Form the start to the end the flowers grown dense and bigger every day and this time i waited until almost all of them were mature before harvest the plants. I changed the plants from one grow room to another(in the sixth week) when they became too high and they couldn't stay more in the smaller grow box(nothing changed in the enviroment between the two boxes). Equipment and grow box: The enviorment of grow box has been optimized every stage with the right temperature, umidity and air flow. Vegetative temp/umidity --> 23-29 °C/45-55% Flowering temp/umidity --> 20-26 °C/40-50% The air flow was created by two pc fans and one big fan. Harvest: This time i harvest a big numeber of beautifull dense buds and i just discarde only few fluffy buds in the lower branches. The result of this grow is amezing compared to my old expiriences. I harvested the flower and i made a fast curing process after i washed the crop and i let them to dry with a fan on it. After five days a take the branches which were to dry and i did the final trimmig before put all the harvest in a open jar for finishing to dry. I collected all the leaves, fluffy buds and trimming scraps in a bag and i let them dry. Later i put the bag in the freezer and when i collect and dried all the scraps from OG Kush and Dandoverde Haze i did some Ice-O-Lator hash. I used 250g of trimming stuff and i made 11.50 g of hash, I had use a set of 5 bag and i take the resin from the 160µ - 120µ - 73µ- 25µ bags. I pressed all the resin in a great block of tasty strong hash. Always better every time 😊💪 Total harvest ---> 90g only of dense buds and 11.50g of hash.

Lovely to smoke. With a great weight given the set back with nute lock. Which Is the downfall to this run. Because this happened In last 3weeks which certainly resulted in small buds. However I am totally pleased with final weight and smoke from.this girl. Xx

I didnt do any LST, just topped and lollipoped.

After two years of cultivation we wanted to re-propose one of our favorite strains 🤩 The first time we debuted we did it with her and we hit the box office by winning the first place in the competition .... LET'S SEE IF WE CAN REPROPOSE US BY IMPROVING CULTURE APPROACHES ! I hope you enjoy the content and I leave it up to you to judge the progress of my growing experience

There is a timelapse of this week, Blueberry is in the background. This entry covers days 30 - 38. This week has seen violent acts. I've topped the blueberry. She's doing well! I've started to give this plant less light so I can give more energy to the flowering GSC auto. I'm not sure how much this will stunt my plant. Lately my feeding schedules for both this plant and my GSC auto are obtained by following the GH Flora Series recirculating feed chart on the General Hydroponics website. I put the amounts they suggest for 1 gallon, but I use 3 gallons of water. So, I give the plants 1/3 of what the feed chart recommends. It's worked well so far. My plants are thriving, and I haven't seen signs of nutrient burn. The only deficiencies I encounter are Cal Mag. I remedy this by mixing in some tap water with my RO water.

Buds everywhere 😍 That clone is growing exactly as expected! Each stem managed to access to the light and create some dense rouded buds, she's gonna be a productive one for sure!!

Introduced nutrients at quarter strength. Growth responded nicely.

the flowers are as dense as a rock

Flushing as we speak! Chopping this plant in 2 days to get a harvest done before the competition ends! This is an amazingly fast plant! Resin production- ✅ Terps - ✅ Fast - ✅ Easy to grow - ✅ I cannot say enough about this lady! Just fed an average amount of nutrients. Vegged a little longer because of flower tent overflow, but once she flipped, she was fast and quality all the way! More details to come! ✌️🏻💚

She is starting to pre flower, let's get it

La Spider Farmer SF2000 continua a tenere a far crescere le ragazze con un ottima luce e spero di riuscire a vedere qualche colorazione tra non molto…la maggior parte dei problemi nella coltivazione della Cannabis deriva da un terreno poco drenante e da troppa 🚿 acqua quando le diamo da bere…bisogna sempre ricordarsi di alzare i vasi e vedere quanto pesano e se c’è bisogno, smuovere la terra un po’ con le mani attorno alla pianta

This was a pretty good grow despite having to fight off trips. The end product is rly dank af. Rly looking forward to make extract with the cuttings.

VIDEOS ADDED FOR @Fast_Buds #BestStrainPresentation Contest! HARVEST - DAY 96 - 06/20/2020 - NEW PHOTOS ADDED (06/27/2020) - CURING AS OF 06/23/2020 DRY/CURE UPDATE 06/23/2020: DRY WEIGHT: 64 GRAMS - 44g Buds - 16g Trim/Larf - Best Results Yet! 🙏 Best Quality flower I have been able to grow in my short hobby career. Best looking, density, quality of flower due in heavy part to @Fast_Buds genetics and my slowly improving grow skills. Cannot wait to get a full test once they dry and cure for 2-4 weeks. I'm going away in a couple weeks so I will take my half-cured tester up and test it by the lake 😎😇 Mac, Frank, and Charlie all down on 06/20/2020 after a week of half light and 48 hours of pure dark. Mac is fully ripe to get that stoney effect. Frank should be right in the sweet spot for highest THC. Charlie is a week or so early for that early energetic pure Sativa end of the spectrum. Mac was a fresh wet trim for the photoshoot. Frank just got trimmed and chopped up today so I will take dry pics before they go in the cure jars. Charlie is still hanging with the sugars. Will trim him today or tomorrow. All have a couple days left hang drying in the tent minimum. Will update with pictures as I go! UPDATE: 06/27/2020 Curing and breathing 2x a day since the 23rd. Made hash for the first time! About a gram from the trim and a crappy magic bullet blender has set up 😅 Going to turn it into Cannabutter for @9teen90 for the help on the logo creation! Give her a follow on IG! -- Thanks for checking it out! Throw down a like and/or follow so I can return the favour! 🙌 -- IG: @GlazedGrow - Msg me you're from Grow Diaries so I can follow back and avoid bots/plugs!

Hey now, hope everyone is having a great weekend and staying safe. Another great week for the ladies, as they are now about 2 weeks into flower, and the stretch is winding down. I am still feeding them silica, cal mag, and flower nutrients maxi bloom by GHE. I will start to add a PK booster this week. I also will be switching to light from V1 to F1 sometime this week, and also integrating the UV/IR bar into the light cycle later this week. I will run the UV/IR bar for approximately 30 minutes prior to lights off to get started. The 5X5 is really starting to fill up nicely, I am running two dehumidifiers outside of the tent and I am able to maintain around 50% RH in the tent during lights on, and around 55% RH with lights off. Still very happy with the Spectrum X from Medic Grow. I am running her at 90% in the V1 cycle and will be transitioning to the F1 cycle later this week. Overall, the plants seem very happy and healthy. The temperature and humidity is significantly dropping so that helps keeping the tent cool and not overly humid. This is by far the best time of year to be flowering plants in my region. I hope everyone has a great weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

This is really the day when I am cutting the plants down. I don't want to fill out the harvest section until I have all the info needed to do it. I find the way it is set up on here to be kind of silly... Today is day 95 since these girls popped and stuck their heads out of the soil. I'm blown away with the size of these plants considering their age. I'm going to contribute the majority of this success to the CO2 gas I use. I filled out my tank 4 times for a total of 100 dollars .. the 4th tank I bought is still full and I'll be able to use it on my next grow. These buds and colas are extremely dense and packed with resin. They are giving off a really deep and complex smell. Kind of like a fruity earth mixed with skunk. I plan on drying at temperatures between 62 and 68 deg. fahrenheit with humidity about 55%. Once the smaller branches snap completely and the buds don't come off 'stringy' then I will move on to the next step of curing. For this I use Grove bags and boveda humidity packs (62% RH). I'm expecting at least 8 oz off of each plant and I do intend to press some with my resin press

Just had to cut some fan leafs off and try to get her in some kind of shape before she start to get some hight. Cut some bigger yellow leafs off too.