Primera semana de crecimiento de estás red cookies gelato, fue una semana sin complicaciones, humedad relativa en 40% y temperatura rondando 20-23 grados, tienen un color espectacular boludo, estoy deseando que llegue la época de florar. Volvemos por aquí las proximas semanas guachines . 🇦🇷🇪🇸 Muchos humos para todos 💨💨💨

13 days in till I switch over to 12/12 flower time whoop in the meanwhile I will be fitting a scrog net for plants. ✌️👽

Día 77 y final para esta Wedding Glue que ha brindado unos frutos hermosos!. Manicura y cosecha para posteriormente secar y curar estas densas y rocosas flores bañadas en brillantes tricomas, fragancias dulces tipo torta cubren todo el ambiente y una pegajosa capa de resina me impide abrir mis tijeras con facilidad, realmente una sabrosa cosecha! Volveré después del curado para dar un informe de cosecha detallado. Buenos Humos! 👽

All 3 plants are beginning to fade starting with the runtz muffin hopefully I can harvest at the same time 🙂

As you can see from the third picture on day 29 she is looking a little ugly and unkept. I'm not sure if this is a normal thing or something I need to take action on. Advice would be great. So day 30 rolling around. Decided I had to try LST again. She felt more receptive to being bent over today as well. I mainly had to attempt it for space reasons. With the current covid panic all the markets where I buy my buckets from are closed and I can't procure a new one to increase my height for probably a couple of weeks at this rate so LST was my only option. She seems to have taken well to it and I will upload a finished picture of her shortly. Day 32, watered and fed her. 500ml of water plus .3ml each of fox farm trio. Hoping to see her perk up a bit. Concerned about the large brown spot on one of her leaves which made me think she was having a deficiency? Probably a bit early to worry about buds fattening up also but I am worried they are looking a bit airy at the moment on the non main cola sites. I'm not sure if my LST was effective at tricking her into trying to have more than one top cola? Day 33. No noticeable gains today, at least to my eyes. I can spot a little nute burn perhaps but hopefully nothing too serious. Looks like a cola that isn't the original top is starting to fill out just as much, if not more, than the original top though. Hoping they all catch up at a similar pace to each other and reduce the pop corn nug potential! Day 35. She has shown a few more bud sites since last post. I am worried that she is going to produce a fair bit of larf/popcorn bud and wanted to know how to get rid of that? I am not confident to remove any growth without knowing for sure it has a beneficial impact on the overall health of the plant and the final results. Any advise is appreciated. She also seemed a bit thirsty to me. The leaves were feeling a bit thin and dry so I gave her 1L of water with .7ml each of fox farm trio. Hopefully she responds well. I will check her in an hour or so to see if the leaves are starting to point back up - fingers crossed.

**Encontrarás la traducción a español al final de la descripción** From/Desde: 24/05/19 || To/Hasta: 30/05/19 From day/Desde día: 92 || To day/Hasta día: 98 You can find the Money Maker Diary here: ** Podéis encontrar el diario de las Money Maker aquí:** https://growdiaries.com/diaries/25667-gorillamakingmoney-gorilla-vs-money-m -----IMAGES & VIDEOS----- This week i tried to capture my favorite top tail buds present in both Gorillas, i hope you like them! -----WEEK SUMMARY----- Finally the last week of these babies, the next page will be the harvest :) 👊. The buds start to weigh too much for the thickness of their branches, no matter how many rhino skin I have used the branches have not fattened almost anything and begin to suffer with the weight of their buds, along the cleaning week I will have to tie them to the SCROG mesh to prevent them to fall horizontally. The aroma, color, shine and movement of the tails is wonderful, if I had not messed up with the defoliation and the growing time, those Gorilla Tails would be 10! ----WATERING CALENDAR----- 26/05/19 - 1,5 l with All week nutrients -(Flawless Finish) @ PH6.4 & 0.9 E.C. 29/05/19 - 1,5 l with Flawless Finish @ PH6.4 & 1 E.C. *****ESPAÑOL***** -----IMÁGENES & VÍDEOS----- Esta semana intento brindaros una imagen de mis cogollos superiores favoritos de las 2 gorillas, espero que os gusten!!. -----WEEK SUMMARY----- Por fin la última semana de estas pequeñas, la siguiente página ya será la de harvest :) 👊. Los cogollos empiezan a pesar mucho para el grosor de sus ramas, por mucho rhino skin que he usado las ramas no han engordado casi nada y empiezan a sufrir con el peso de sus cogollos, durante la semana de limpieza voy a tener que ir atándolas a la malla de SCROG para que no caigan horizontales. El aroma, color, brillo y movimiento de las colas es maravilloso, si no hubiera metido la pata con la defoliación y el tiempo de crecimiento serían unas colas de 10! Qué ganas tengo de que pase la semana de limpieza y hacer la colecta, estoy que no cago!!!!!!! jajajajajjajajajjaja. ----WATERING CALENDAR----- 26/05/19 - 1,5 l con todos los nutrientes semanales -(Flawless Finish) @ PH6.4 & 0.9 E.C. 29/05/19 - 1,5 l con Flawless Finish @ PH6.4 & 1 E.C.

The color of the leaves begins to turn purple and orange...

Day 50 the plant has been growing at an incredible speed and has a very very large flowering stretch in fact I only have left 5 inches to raise up my light and then I'm going to have to do something to keep an eye on those branches so they don't stretch anymore or at least they can have enough light to proper development. From all the plants I have grow indoors this one is the only one that has make my light stretched to the top of the tent I guess it's a good problem to have. Other than the incredible stretch the plan seems to be healthy and doing pretty well the flower is development and I'm looking forward to see how this is going to turn out. Day 52 I have rise my light to the top as high as I can and she still grow past the light towards the exhaust system I had to tie her down in order to create an arch and in that way make her receive enough light instead of growing over the top of the light where there is actually no sufficient light if this problem persist I will have no choice but to do super cropping on the tallest branches and see how they react to that I decide to take some cuttings I'm trying to clone this one to see if I can get her outside in the summer in another buddy house and see how she reacts to challenging Ontario weather. Day 53 I have to Super crop several branches Unfortunately they were growing straight into the light becoming burned by the intense light I hope the plant doesn't react to bad to HST and still deliver awesome buds thank you for reading I will continue to update have a happy grow.

*Vam Doesnt seem to increase root size. Looked identical to no Van control. *increased PPM To 350 *Transplanted to 1Gallon pots using HappyFrog

She smells and tastes great 🔥🔥🔥🔥she also looks good with her purple buds.

LIMETTA MARMALADE by JOLLY POND FARM (Cotton Candy Kush / Mimosa) x (Koffee Cake / SkyCuddle Kush F3) Bred by @landrace_bureau Hunted/Selected/S1 by Jolly Pond Farm @jollypondfarm jollypondfarmacy.com Sativa Flowering Time: 68-73 Days ~~~~~ 1/14/2025 res were all swapped yesterday except for #3 , roots barely reaching through, still top watering, as soon as i see its 5 finger leafset, i'll switch to veg nutes. VPD @ 0.9kpa ish DLI @ 30 ~ ~~~~~ 1/21/25 i have noticed that the limetta marmalade are a litttle more sensitive to light at this stage than most of what i am rocking, but that could be because i've gave them a little light to begin , so i can't say for certain. however everything is looking good. Follow me on Instagram @growmoregaas & Twitter @growmoregas

Do you see that SWAMPMONSTER in the corner of the tent there ?? The Queen towers above the canopy and the rest of the plants lol. It's really interesting from using the Smart Proteins, i think how they work is that the plant is able to process them and compensate any kind of slight deficiency which means that each plant that gets the proteins is able to grow to it's maximum potential and at the same time grow to its **individual** potential... that's why each of these plants has so much "character", because if you look closely it's less a question of phenotype but more like "individual expression".... INTERESTING !!! Anyway that's about the visual... my main concern about these is how loud they f-ing smell !!! ITS PROBLEMATIC, so be conscious of that if you plant to grow these one day ! REALLY REALLY LOUD, honestly there should be an additional category on GD like "problematic" which is beyond the "strong smell" category. I have two large carbon filters on two 1330m3/h fans and it's a problem. Hope you understand how unusual that is for a plant in veg lol... I think the smart protein probably affects how strong the plants smell because all the plants seem more smelly than expected... TBH i'll fix the smell issue but hopefully it's a good sign and an indicator of the quality i can expect by harvest time? These also got two rounds of defoliation , and i flipped them to flower like 4 days ago. This was an exciting veg to me, but now is when it gets interesting, let's see how beautiful these flowers are !! Test genetics always have that little bit of mystery to them right? By the way, I'm often visiting this site, so drop me a message about whatever, especially if you have advice ! Thanks for following along with me, i appreciate it really ! ITS FLOWER TIME FOLKS LETS SEE! 🚀

Woah. She just keeps on gaining height. I remember readin somewhere that when grown in 11l pots they’ll only get to about 30cms - but that’s such misinformation 😂 that’s why I love learning from experience, even though the internet is a great source to gather information from. Last week I discovered some bronze spots on her leaves - and they haven’t disappeared yet. I suspected a calmag deficiency, so I started giving her more of it. I don’t care if the damage done doesn’t go away - I just don’t want it to get worse. 06/11: Fed her. It seems like she empties her pot every second day now. I usually feed her until runoff - and I feed her a lot. Someone suggested that I feed her less, so I’ll see how that goes. Maybe that’ll make some nutrients more available to her - I don’t know. Also I found a sticker for my desktop computer that I never used (I hate stickers) and I thought it would look well on her pot. It reads “Do Not Disturb” 06/12: She’s looking good - beautiful flowers are popping up here and there. 06/13: Not looking too good today. I don’t know if she was underwatered, but she was all droopy all day. I fed her twice and now it’s just a waiting game to see how she’ll react to that. 06/14: She’s well today! It’s such a game between me and my dramatic plant... I guess she was just acting hangry with me yesterday. 06/15: I thought some of her leaves were looking a bit dark - and possibly tacoing a bit? But it could just be the light. Regardless, I gave a little less grow nute, to back down from nitrogen. 06/16: Nothing new to say. She’s gorgeous and dramatic. 06/17: Fed her today. Can’t wait for her to buds to fatten... I feel so impatient 😂

Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making thier way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying postition all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 Looking beautiful today and looked like she could use her first haircut.. gave her a TOP off. Roots are laying in the water everything is looking right on track.. Week 1 Day 5- 8/16/2023 walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. She had roots nicely in the water.. this grow is on!!! Week 1 Day 6- 8/17/2023 Humidity was a little low this morning, so I refilled the humidifiers. Other than that, the temp looks great, the PH looks great, the PPM looks good the plant is in the praying position and all damage from the little drowning seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started first hair cut given and both side nodes are growing. Everything is looking good and on track.. A lot better than week one of the last grow when I had them drowning week 1. Really excited on how this grow is going to come out.

28/02 se riega con Amazonia roots 3g/L Viene creciendo muy rápido 02/03 se riega con agua 04/03 se riega con 700 cm3 de agua de ósmosis inversa + 300 cm3 agua de la red + 0.7ml de cal mag. + 0.5 de top auto (macro y micro nutrientes) en una pequeña dosis para que se mueva más rápido! Ec final 0.7 ph 6.2 06/03 se riega con agua + calmag

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

Smells amazing