What another great week it’s been , today is Day 39 from seed an the lil ladies have jumped into preflower 😍! Yesterday gave em the trim up of the unders , kinda popsicled you can say to each one, cause we want to focus on them colas ! This week we should see some more great progress, let them caps start stacking ! Can’t wait to see what we do next week ! Hope you all enjoy an have an amazing productive day! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨💨🤙🏻

Hi guys, At the end of the story, I am very happy with the whole cycle and finally the outcome, I almost killed everything in there 😂 The Acid Dough is a great sativa strain, with a short flowering period. I did have problems throughout the cycle overfertilizing the plant. I toppped them, and then use LST training to help her growing wider, Probably if I wouldnt have messed up with the ferilizer I would have a much better final product, not even talking about quantity, but quality. The whole plants were dried for 18 days after which they were finished in jars for another 6 weeks, if I dont fell... I would like to thank Grow Diaries for this amazingly-organized community they have created, where we all can learn a lot, and share something we really love. Thanks to everyone who stopped by and looked at the diary, squeezed the like button or comment the diary. 13/12 I'VE MADE MY FIRST RUN OF BUBBLE HASH! Very very happy with the end result, did not weight anything yet because is still wet big time, I lightly squeezed it a bit, before let it drying on parchment on a cardboard. The smell it's just absolutely crazy. I can smell strong citrus notes in the 120µm but the 90µm and 73µm explodes with crazy-sweet note. While the 25µm (did not use the 43µm) where I did collect most of the hash, smell like good and sweet hash, nothing crazy like the previous ones but a very buttery like consistency that makes me want to eat it like this...dont ask me why...even though I know you all probably felt this way too... Anyway, the paper sheet says it all about timing, washes and µm used for the extractions, but just in case I'll explain it down here. I have done 3 wash with different timing. 1º wash: 5 min only to get the most brittle trichome heads 2º wash: 10 min stardard 3º wash: 30 min to stock up a bit 😅 I could have done an extra wash for sure and get more out, but I was running out of time so...I will update with the dry weight, it was not the only wash I've done, that were just too many grades to weight up..so I chose to do it once all dry! See you really soon with on the nex run pals!

2018-04-10 Day 1 I gave the girls water and nutrients yesterday so nothing to drink today. Turned them 90 degrees today, to give my girls as much lightexposure as possible. The flowers get bigger and bigger for each day, Overall the ladies look really good, the colors are very nice, they look healthy. Somehow the photos of nr1 got lost, very strange, but great pics of nr2. Also added videos of them both. Power Plant XL nr 1 is 67 cm Power Plant XL nr 2 is 68 cm ------------------------------------------------------------------------------------------------------------------------------------ Strain information Genetics for the famous Power Plant were captured by a group of Dutch growers on a trip to South Africa, back in the 90’s. They managed to breed a strain that was soon a popular choice in coffee shops of the Netherlands, most likely due to the soaring and intense Sativa high. Zambeza Seeds thought that the productiveness of Power Plant should never be forgotten and created an updated version, to bring the legend back to live. Power Plant XL yields up to 600-750g/m² in a flowering period of approximately 55 days! The efficiency and productiveness of Power Plant XL fears no comparison with many recently bred cannabis strains. Indoor heights of 80-110cm make this sativa-dominant variety relatively easy to grow, but outdoor growers need to be aware of the power that is being released under the sun. Outdoor plants can easily reach heights of 150-200cm, and yields of 500-600g per plant. The taste of Power Plant XL can be described as a delightful blend of sweet and sour flavours, with subtle hints of pine tree in the background. Smokers who appreciate a very strong and uplifting Sativa high will be more than satisfied with the effects. One will experience feelings of euphoria that are definitely intense and uplifting, typical for a South African Sativa like this. The up-high can also evolve into being more relaxed, especially when larger quantities are being consumed. Some people suspect Power Plant to be grown in large commercial operations around the world. It doesn’t really matter if these assumptions are the truth or myths, but Zambeza’s breeders are very proud to bring this highly productive legend back to live. The updated version of it, Power Plant XL, is the most efficient Dutch "bud factory" money can buy. -------------------------------------------------------------------------------------------

👨🏻‍🌾

Bisher guter Stretch, nodien Abstand super. Bisher keine Mängel. Kein Überschuss.

Defoliated and flipped to 12/12 Slight stretch. Plants didn’t like that I only gave them half veg nutes and half bloom. They look nitrogen deficient. They’ve also shown some calcium deficiency i believe. The uprising foundation is cal mag and sulfur mostly I believe. So it’s good to have

I've defoliated all the large leaves on all the plants. I started with the Tropical Marker and Purple Kush. I topped these two as well. The Pink Gelato is still very slow. Do you have any idea why? ⛺The tent is configured to: 💦Humidity 75% 🌡️Temp. 25-18 °C / 77-64°F / heater goes on after passing 17°C 🌞Light 70% / 18h / 60cm/24inch to pot 🌀Ventilation is on and on L2 💨Fan is at 25% when humidity to high Stay tuned! ✌️❤️ Please follow and like for more 😎!

Day 64 from seed Smooth sailing to the end. Edit: Day 68 from seed. The left one is almost done, the right one seems to need a little more time. Turned on 440 nm blue light for tri production. Still hoping to harvest on day 73. Gave them their last drink. Also the 440nm and the 660nm adlites + full spectrum main and side lighting looking awesome :D

Beginning of week 6 and all is still good. She’s got some nice big frosty nugs on her all over the place. She stretched out more then my other 3 obi-wan so her buds are more spread out then the other indica dominated plants around her. Hers are the frostiest nugs of them all though, even got a bunch of her guard leaves covered in tricombs. Loving this girl so far in this setup, I’ve done her before in a smaller tent under cheap Led lights in DWC and got good results, but this girl is knocking it outside the park so far for ease of growing it and what she produces no matter how you grow her. Lol Cheers 💨

it grows so fast. The lower leaves are shaded and away from the light. So I cut them as the plant gets taller I really don't have a good setup to be able to clean my roots. I tried this week anyway. I watered each pot with 2L (not enough I think :/) of water at 450PPM PH: 7 then after I gave 1L of water at 900PM PH: 5.5. There was a big puddle in the room afterwards. But it wasn't that hard to clean up after all. In 5 minutes with a rag and a bucket ------------------------------------------------ -Daytime temperature: 24-29°C -Night temperature: 22-27°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==

Hello growmies! Welcome to week twelve of An Epsilon Adventure! Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow! There has been a heatwave this week and I have been unable to get the temps much below 30c, but the humidity I have been keeping under control with a dehumidifier. Daily Updates ### Week 12 Day 1 20:00 10/9 Photographed plant 2 and about to harvest now. More updates to come later as I photo and fertigate or harvest each plant. ### Week 12 Day 1 01:00 10/9 Fully trimmed up and hung plant 2 to dry. ### Week 12 Day 3 01:00 12/9 Photographed & Fertigated 3l plants 4, 5, 6 Cut plant 1, in trim jail right now. More updates later ### Week 12 Day 3 17:30 12/9 Photographed and cut plant 6. Trimming of plant 1 finished, trim of plant 6 has begun. ### Week 12 Day 3 20:30 12/9 Photographed the trimmed plant 6 Plant 6 fully trimmed up, just plants 4 and 5 to go! ### Week 13 Day 5 21/9 Photographed and trimmed plant 4 ### Week 13 Day 6 22/9 Photographed and trimmed plant 5 --- Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========

End of week 4 and all is great! This girl is beefin up to be a monster! Already got a ton of bud on her an their is still 4-6 weeks to go. loving this Hortilux Eye 1000w bulb. Really bringing the A game. Not so bumbed about spending $ 125 on a bulb now...lol haven’t had to really take any foliage off yet with the exception of the growth under the netting I removed at 1 weeks into flowering. I say “hell no” too popcorn fluff! Lol gotta save that energy for the top buds. Going great so far anyway, I made a DIY light bar for my light rail mover out of an old metal bed frame so that was cool. Saved $50 per tent... I ain’t no sucker gonna pay $50 for an aluminum bar with some bolts. Lol gonna hook up my “water coolers soon too since the summer is approaching and my water temps are begging to creep up again. Lol you may have noticed a computer case sitting in the corner of my grow tents in past videos, they are DIY water chillers made from some thermoelectric coolers and a copper cooling coil. Stay tuned to see them operational soon! I will be posting a DIY video on how to build one yourself out of an old desktop computer and a few other parts off Amazon. Cheers 💨

Everything germinated i had actually 8 cookies, 1 Barney's farm Runtz muffin, 1 Humboldt seeds Gorilla Breath and the French Connection Rosso Corsa. Gave 1 cookies and the Barney's Runtz muffin away to a friend.

Wow what a beautiful monster she has become. I think (hope) she is done stretching. I have had to support most of the colas this week. A few had lain over towards other plants and if they were not blocking them then I left them lain over. The buds are really looking great and they are getting fatter on the daily. Thanks again for following me on my adventure with making my own seeds.

Very Good Strain

Week 4 after another round of LST after 3 day removed tied down but two days later lost again with garden wire

Hi guys So into week 4 now for these 10 autos under the marshydro tsl2000. Some are bigger than others but all looking healthy. I ran out of pegs for my lst so I put up a scrog net. I wont keep it on full time only u till the plants have developed and stretched enough for me to remove it. By the end of the week they should be nice and stretched and ill just keep tucking them lol