So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.

Flushing

Flower day 17 - All the ladies are looking great, starting to see a lot of bud sights & the smell is definitely getting stronger everyday I open the tent! Thanks for following & happy growing friends!🌱✌️🏼 Flower day 19- Got a bigger dehumidifier because I was having problems on days I would water the humidity would go through the roof at night so to prevent mold I bought a bigger dehumidifier but now it is throwing off so much heat the tent is pushing 90 degrees F at some points throughout the day so I’m not exactly sure how to fix the issue! Will definitely not be running so many plants in the next run for the 5x5! Hopefully things get better!😅😅

Girls are doing well with the LST. Kosher cake was topped last week and now has what looks like 8 heads. 3rd of June have given the girls living soil veg.

Hola amigo! Una linda semana pasó para estas pequeñas, ahora ya se encuentran fuertes y muestran potencial en un hermoso tono verde. El sustrato orgánico les ayudó a adaptarse perfectamente! Riegos cada 3-4 días. Ph: 6.2-6.5 EC: 540 PPM 020+/020- HR: 65% 5+5-. C⁰: 19-26% Grow yourself!

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

This week was a real breeze! She's gaining a ton of weight on the bud sites and she's really growing nicely! She's starting to bud around the flowering sites and really finishing nicely. The formation of bracks and the formation of the buds is my favorite part because that's when you get to see somewhat of the final picture and the time the flower is most colorful! Now the second best part is harvesting the flower for smoking which will be occuring soon! The smell on these girls is very invigorating!! She's putting out a smell of a Lemon Cherry Now n Later! You can smell the Lemon and Cherry right away when you open up the tent! I can't believe how big she's got and how beautiful they are coming along! I have to say that this is one of my favorites to grow and my favorite smelling strain! I also love the way the flowers are stacking on the colas!!! The frost on top of the cola leaves is insane! During the day I drop the humidity down to 45-50% and then at night I raise the humidity up to 60-65% which helps a ton with flower promotion during the flowering stage! Also, I raise the temperature during the day to 80° and at night I lower the temperature to 55°-60° which helps mimic the autumn temperatures that aids a ton in flower production in the flowering stage!!! I'll be stopping the two Lemon Cherry Cookies Auto's from receiving any synthetic nutrients and flushing them now since harvest will be within the next two weeks or so! I'm doing that because they stop taking nutrients in and start to self canabulize as a normal (ending) part of plant life. Then I'll give the two ladies plain pH balanced H20 for the next 2 weeks to flush any and all nutrients out of them. Then three days of darkness. Finally I'll chop them down to hang in my harvesting closet for 7-14 days with a dehumidifier on at 65% humidity. Then I'll place the flower into the trimmer and then into the grove bags for the last step in harvesting! The grove bags will keep the flower at 58-62% humidity. They also help keep the flower fresh longer, the Terpenes fresh, the Terpenes flavors, and from becoming moldy or dried out! I've used both these and the mason jars with boveda humidity packs but to me the grove bags are a must and a go to fail safe!!! All you do is hang your buds upside down at 60/60 or 65/60 for 7-10 days or until the braches snap and make that noise. Thanks and as always stay safe, stay high, and stay blessed!

💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 28 and she's just killing💀it👌 👉Added straws within the Tiny pot to help with air and watering 👈 So I'm starting to see she needs watering every single day and now need nutrients 🙃 Moved to Bloom and Booster Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Hello my friend, Plant is ending, I've checked a bit in late the trychromes, as we can see on the movie plant is almost ready to harvest, But I'm just flushing few days, I'm in late, so I'll check trychromes all the days, and I'll try to wait one week to harvest, I like harvest when 75/25 milky/amber. Next week, will be the harvest 😃😃. See you next week for the result, Have a good week

Nicole kush ya es conocida dentro de mi carpa y en todo el mundo. una planta muy vigorosa, su aroma dulce y cítrico deleita incluso a los que no entienden el cannabis. Su sabor denso y refrescante queda grabado en la mente del experimentador. Una hermosa y transformadora planta con flores. Tendré esta joya en mi jardín en otras ocasiones.

I never actually weighed this plant once dried. I would estimate around 400+ grams as I gave away so much to friends and it still lasted me well over 2 years. Beleive it or not, my wife who disapproves of me smoking never knew I was growing. Until the end that is when she needed a screw driver and entered my shed to see what you can see in the videos. Hahahaha, it took a while to recover from this thats for sure. After this crop was finished, I basically rarely smoked for 4 years until I decided to go under lights this year. And now outdoors again with my latest project.

Nice;))))))

First week of Flowering change the light schedule and first signs of pre flower are showing. This week I add 1ml/L of Terra Bloom and Sugar Royal. 2L Water per plant every 2 days. I went and removed a bunch of large fan leaves refucing the shadow areas below. Exodus Cheese seem to grow wider and taller than his neighbours GH Cheese…. and the quest for cheese continues.

This Week i let them just continue to grow out of the LST. Last Day of the Week i cut down all the lower branches and defuliated the leaves. First Week of Flower and the Plant shows some nice female Flower-pistols. This Week i started with the Flower Feeding, i gave her about 4 tsp Seabird Guano as Topdress Feeding, it got a NPK of 7-4-5 so not idial for Flower but i guess Perfect for Streching-phase. Please Let me Know if you do Lollipop your Autoflowers ?? i was pretty unsure if i should do it but i was afraid that if i didn't do it it would cause problems cause of the ventilation. Hope you like the Grow so far !

Week 2 and the training has already started. I was inspired by Canamatoes, this is his LST method. Day 17 - when LST turned into HST aka FIS technique (fuck I snapped). So it started as a really harmless routine, I wanted to tie down the plant when at the weak point where the previous tie down was (1st nod) the main stem just snapped 😬 First I tried to use some duct tape and it did not holding the plant together. I grabbed the super glue and it seems like it does the job. ⚕️ When I got home in the evening two fan leaves were wilted. Will she survive? Let's say she will survive, I am sure due to stress the harvest day will be delayed and it won't be a massive yield. Day 19 - I decided to go ahead with a VEEERY GENTLE LST. We don't have the luxury to wait for the full recovery.

#seedsman420growoff and #SeedsmanSeeds 📆 Week 3, 11-17 May 2024 11 May - Increased light power to 60%. 12-17 May - Observed and let the plant grow. 📑 Increased light power to 60% to get DLI 25 coverage on the plant. Made adjustments to lower branches moving them through leaves. The plant seems to be on its way to keeping a uniform height without any training. 🍶 11 May nutrient solution changed 🍽️ 11 May feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 1.6 at 70 degree F 🔆 Light power 60%, DLI 25 canopy coverage at 18hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this week. Thanks for the look, read and stopping by.

I finally harvested all of my photo plants. So my 2 auto plants are getting an outage for the rest of their lives I have moved them both into my larger tent with more light and more room. I’m sure 100%h sure why both of these plants are alot light green. I think it’s I got a little behind on the nutrients but the green is slowly comeing back. It’s been hot lately I have the lights running at night now

This plant only started flowering after I switched it to 12-12 Not an autoflower This plant also has a mystery graft! I grafted a few and only one survived but as I did not label them I’m not sure what it is Could be RQS royal Cush or northern lights automatic both indica plants suppose to be autos. Bare in mind this royal jack is sativa! It seams to be ok I will be providing it more light to incourage it to flower Looking forward to seeing what the flower will be like.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone 😃. The lady grows exactly as she should 😍. She looks beautiful and her growth is strong 👍. I think that I will pot in 11 liters in the next few days. Until then, I wish you lots of fun and all the best 😊 You can buy this Strain at : https://www.zamnesia.com/de/4532-zamnesia-seeds-gorilla-glue-feminisiert.html Type: Gorilla Glue ☝️🏼 Genetics: Chem's Sister x Chocolate Diesel 50% Sativa/50% Indica 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .