So far so good :). Cantaloupe haze needed more runoff as leaves were clawing.

70 days in for these girls and they are progressing the way they should be and getting fatter , there are a few dried up taco leaves from a bit of heat pumping out of the HPS so I changed the air flow to be more directly blowing the cold air up and the hot away from the buds and out the exhaust. I had to recalibrate the ph meter also , luckily I did as it was about .8 out of calibration but I haven’t seen any signs of abuse on the plant yet hopefully I caught it in time . I harvested a top bud off one of the smaller bud arms off the pineapple as we haven’t had fresh bud in over a year and honestly you can’t even tell where it’s missing , weighed 12g wet so hopefully we get an eighth or something to chop up . Maybe two weeks left for the pineapple and 4 for the GZ .

Day 71 - Starting week 11 off with a bang and love the look and smell of this girl. She’s really starting to fatten up and and need her to start filling in more. Thinking about 2-3 weeks max before she’s ready to chop and looking forward to it. Gave her the first of her week 11 feedings today and might cut her off to just water starting week 12. Day 72 - No big changes or updates. She’s fattening up and filling in beautifully. Will most likely start flushing after the end of this week. Day 73 - Gave her a second feeding today and next one will be Saturday. All is looking great and thinking she’s in track to be chopped at the end of week 13 but will keep and eye on her. Still some clear trichs but a lot of milky in there. She looks gorgeous! Day 75 - Looks great and on track for a chop at the end of week 13. Gave her the last feeding today and will water with straight water and Sledgehammer from here on out to start flushing her out. Day 76 - Closing in on the end of week 11 and she’s just as pretty as ever. Gave her some water today as she seemed to be screaming for it. Will probably do one more week of feedings then flush her with sledgehammer during week 13 and she should be ready for chopping. Day 77 - Ending week 11 and looks great. Have a few leaves showing deficiencies but not sure if it’s because she’s coming to the end of her life or somethings missing. Runoff pH was a little high so worked to correct that today, we’ll see if that helps. If not, she’s only got 2 weeks left.

Purple is starting to show on the leaves. Hairs are nice and white. Thc is starting to form around the bud points. It’s exciting to see these colors and the process of this one.

The first week of flowering!!!😍😍 Wow, how attractive!! It is very attractive to me. How about you??🌱🌱🌱🌱 Please coment to me!! I changed the light cycle this week. I changed the lighting time from 18 hours to 12 hours. I feel that after doing this, the plant will grow faster in the flowering stage!!! This week I used short flowering feeding

Flushing the last bits out off the Maybe one to go for last drying down of the pots and the. Lights out for 24 hours chopping time almost upon us CBD spliff Berry Afghani Gold Hyper Glue There other ones have to go little longer so they will get longer there not done showing off 🤘🏻 Captain future Imperium X Blackberry moonrock 28/12/21 Chop chop 1 CBD spliff berry 1 Afghani Gold from @spliffseeds and 1 hyper glue from @anesiaseeds One of each strain left to chop good time 29/12/21 Top to bottom 1X hyper glue wet weight 369gr 1x Afghani Gold wet weight 277gr 1x CBD spliff berry wet weight 203gr I don't weigh big branches because i don't smoke it and it's not in the end result either 3 more to go these 3 where wet trimmed and being drying in Dry rack first time doing the wet trim and i probably prefer dry trimming for sure CBD spliff berry is very leafy and fluffy and covered in thricome so i probably keep wet trimmings them to prevent mold when drying the Afghani Gold and Hyper Glue are Rock solid and can easily be wet ore dry trim so These next 2 i probably dry trim good times after these 6 will be done and drying then i have 4 still too chop 👌🏻👌🏻👌🏻 loving my hobby visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Slowed her feed way down this week and next before my flush, I added molasses to my last couple feed. She smells like grape jelly when you touch her, cant wait to get her into a jar...

Holky jedou pěkně, snad začnou brzo nakvétat..

🌱 Eternity Cup 2025 – Woche 6 Update 🔥 Unser Eternity Cup 2025 Grow, powered by Zamnesia & Plagron, geht in die nächste Runde! 🚀 Die Runtz Autoflowers unter der Evo 301 (Samsung Chips, 180W) zeigen jetzt deutliche Unterschiede – jede Pflanze entwickelt sich nach ihrem eigenen Tempo. 🌿 🔍 Setup & Entwicklung nach 6 Wochen: 🌿 #1 – 20L Topf, nicht getoppt, aber LST Diese Dame steht jetzt voll in der Blüte! 🌸 Dank des großen Topfes hat sie sich super entwickelt, schöne Buds setzen sich langsam an. Sie bleibt stabil und gesund – die LST-Methode zahlt sich aus! ✅ 🌿 #2 – 8L Topf, getoppt & LST Während die anderen zwei sich voll auf die Blüte konzentrieren, legt #2 nochmal ordentlich in die Breite zu! 📏 Das Topping und LST zeigen ihre Wirkung – die Pflanze bleibt kompakt, aber buschig. Die ersten Blütenansätze sind zu sehen, aber sie nimmt sich weiter etwas mehr Zeit. 🌱 🌿 #3 – 8L Topf, nicht getoppt, kein Training Genau wie #1 steht auch diese Pflanze voll in der Blüte! 🌸 Sie ist von Natur aus etwas höher gewachsen und beginnt jetzt, schöne Buds auszubilden. 🌱 Fazit nach Woche 6: Die ungetoppten #1 & #3 sind mitten in der Blüte, während #2 sich weiter in die Breite entwickelt und noch ein wenig hinterherhinkt. 🌱💪 Aber alle drei sind kerngesund, und es bleibt spannend zu sehen, ob sich das Wachstum von #2 am Ende durch höhere Buddichte auszahlt! ➡️ Wie wird sich der Blütenaufbau in den nächsten Wochen entwickeln? Bleibt #2 länger in der Vegi? Wir halten euch auf dem Laufenden! Stay tuned für Woche 7! 🔥 Update vom 25.02 die explodieren ich muss das Zelt wechseln maximal 1 Woche noch und sie kommen in das doppelt so große Zelt !!! Ich bin so Happy bitte schaut euch #1,#3 an das sind Autos #EternityCup2025 #Zamnesia #Plagron #GrowDiaries #RuntzAuto #Homegrow #CannabisCommunity

.

Se preparo una solucion de Mills Start R: - PPM : 100 -pH : 5.8 Se submergio cubos de roca de lana dentro de la soulcion. Cada semilla que se germinara se paso a un cubo de roca de lana y se mantuvo sin luz. Cuando las plantulas salian del cubo, se pasaron a otra bandeja de germinacion con domo de humedad bajo una luz T5.

@FAST_BUDS, Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grow. First, I'm just going to say I'm done with the construction of my new growroom. I put some pictures on the construction here in week one. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable environment in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 8 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. ----------------------------------------------------------------------- 2017-09-25. Week 6 starts. Added a video of the girls. Gave the girls water and nutrients. Girl N1 is 60 cm high and have grown 14 cm in 7 days. Nr 2 is 37 cm and has grown 4 cm in 7 days. I flushed the girls yesterday with 40 liters of tap water. Im lowering the humidity in the room with a dehumidifier and try to have 50% air humidity. ---------------------------------------------------------------------- 2017-09-29. Installation of the New light rail in the grow room. Its Advanced star light V 5.0. Added a video of it.

I was told to never judge a strain purely off it's THC percentage. To smell a plant, and what your nose picks out is generally the strain that will jive the best with the endocannabinoid system in your body. This strain exemplifies that. It's only around 17% but the high is amazing. An under-rated strain for sure. Very easy strain to grow. Although the same strain, one looked pretty different and was much frostier despite getting the exact same treatment from seed to chop.

Hey everyone, we're at the start of the second week of flowering and already some white pistils are popping up here and there. It's incredible how much leaf growth the plants have put on in just a few days. Honestly, I'm a bit disoriented and hope I didn't overdo the defoliation. Thanks to a weather change, temperatures have cooled down a bit, and I've managed to lower the lights-on temperature by a few degrees. I've removed the humidifier, yet humidity is still hovering around 54/55%. Besides regular watering, I'm applying a foliar spray with 0.5ml/L of Bud Factor X and 0.5ml/L of Rhynoskin. On top of this, I've been stunned by the number of secondary branches that have emerged – so much so that I'm unsure how to proceed except by following the rule of removing anything that 'won't get enough light.' But the plants were seriously bushy... I'll leave plenty of photos so if anyone feels like giving me a hand, they've got material to work with (even if it's low quality). Otherwise, the deficiencies seem to have slowed down significantly. I forgot to mention that during germination (directly in the final pot), I used mycorrhizae (Great White Granular 1). Peace out."

Trying to limit the stretch. Not worried about height as much as width. I might remove plant clips once stretch slows. Full AN run. Adding big bud (removing ignitor). Running candy and tasty next week. Bud factor X week 3

Hello growers day 22 in the garden with the gorilla glue auto iv started feeding her with some bio bizz 2ml cal-mag / 2 ml bio grow/ 2ml bio bloom iv also have her the first bend she didn’t seem to mined it she is growing abit slow but she is on my balcony in the uk just waiting for my other plants to finish then I will move her into the tent then she’ll get more light so until next week be safe and happy growing ✌️

Well I was 2 behind! Things have been super busy here at the place! I’ve been waiting on some nutrients but there has been some delays but have been doing what I can! The reason I got a few deficiencies! But it’s all good we got the feed going now but lost some leaf color! 🤷‍♂️🏽 My buddy grew some good B+ and all this talk about Burning Man, we got out there while watering!🤪 Some might say it was excessive!

Lindos buds, duros como pedra. Aroma genérico.

Logging in a little late this week but these two girls are going SO well right now. Some of the most healthy genetics I've ever dealt with and they just keep stretching. I guarantee these will yield quite a bit.