Lunes 26 de Agosto 2024, segunda semana de vida de estas preciosas, siguen en giffy, próximamente trasplantar a macetita de cartón, iremos a Walmart a comprar sustratito para ese trasplante.

:)

vid is from day 22 picture is day 26

Hi Gromie's welcome to my 8th grow, have been half hearted at doing perpetual growing in recent times. Just get a bit lazy after a grow& harvest ( as U put a lot of time, love,& energy & passion into those beautiful girls who will reciprocate the love in return in the form of beautiful sticky solid dense & plentiful buds😍 but it can take a bit out of you! I tell myself I'll take a week off & then I've got around a pound+ to trim & I end up slacking for a couple of weeks, even been guilty of murdering a few clones/ young plants by starvation & or mistreat them & slow/stunt growth. But I am tired of running out of weed & waiting ages 4 more . I smoke a lot & recoup my grow cost, nutrient, electricity & initial investment. Due to demand! (Seem people prefer to get home grown hydro due to the very high quality & great terpenes) it runs out Fast. So after much thought I've decided to get right on top of thing's with my grows this will be my 8th grow in just over 2years & the plan is to run an expanded & upgraded Hydroponic perpetual operation. Originally started in 1mx1m with 600watt hps/mh . Upgraded to 1.2m tent & mars hydro FC-E480 480watt. Fooled around a bit with perpetual using 1m tent 4 veg. 7 quite successful grows & harvest's. Average a pound per grow from 4 plants easily with the FC-E 4800. Upgraded to 1.2 X 2.4m tent for flower, using old1.2m flower tent as new veg tent & old 1mx1m veg tent will be a drying tent /extra grow space if needed.Ive also set up cloning & propergation area , storage space 4 nutrients & grow equipment & workbench/ desk to record diary/grow journal . Both tents are hooked up to a 2 into 1 splitter venting out window, flower tent uses filter both tents run 6" air extraction set ups. Clone light is a viper spectra p600 100watt fully dimmable to a couple of watts. I obviously don't need that many watts for clone area (on 25watts) but this light was cheaper than a led or T5 clone light & versatile, use in veg or flower tent. Veg runs a viper spectra XS1500 150 watt & have a 2 nd XS1500 if needed flower tent runs a mars hydro FC-E4800 480watt with top feed recirculating hydro. Waiting on another FC-E 4800 for the other side of flowering tent & will do some DWC that side. Should easily pull 2+ , training & scrogs hopefully closer to 3p

They all are getting close to harvest except Gorilla Glue which decided to out grow tent. Had to open vent and add light for top cola. Ugh

Good growth this week, the roots have already reached the pots! The Blackberry Cake seems to develop nicely but it's still smaller than the two others. I topped the plants and started to apply some LST and they responded very well. This is the first time I try to do some LST without bending the main stem, let's see how it goes. I increased the light power to 75%. I moved the fan to be further away from the Blackberry Cake because it seems that it suffered from the wind, the leaves look and feel dry. During watering, only a small quantity of water ran down in the saucer and I poured 2l in each pot. The Blackberry Cake and the Cashew Kush looked a bit droopy, I think I should have watered a bit sooner. It starts to smell in the room 😏 Plants heights at the end of the week : ------------------------------------------- Blackberry Cake : 12,5cm Jack Herer : 18cm Cashew Kush : 19,5cm

She stretched a little bit more in the last week, everything very healthy.

3gr Phosphor Booster

Welcome to week 8 of our white truffle grow! She’s looking beautiful and stacking up. The strech is really not that crazy until now, so I’m curious how this develops. I had the chance to smoke her little sister black truffle, which I like a lot! At the middle of the week she got a defoliation, because I struggled with too high humidity inside the box. Hope the defoliation helps her a little bit. She has startet to strech and still looks healthy

Hey fellow green thumbs! 🌿💚 It’s harvest time for our Auto Fat Pete’s Cookies from Super Sativa Seed Club! After an exciting journey, we’re thrilled to share the details of this unique plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our Auto Fat Pete’s Cookies was harvested yesterday. While the flowers turned out less dense than expected, the amazing smell has us super curious about the final product. 🌿🌸 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Fat Pete’s Cookies: • Bud Structure: The buds are not as dense as we’d hoped, but they are still sticky and resinous, showcasing a beautiful array of green hues with hints of purple and orange pistils. • Aroma: The aroma is incredibly strong and delightful, filling the grow room with a sweet, cookie-like scent that hints at the strain’s name. 🌿🍪 • Trichomes: A generous layer of trichomes covers the buds, promising a flavorful and aromatic final product. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Fat Pete’s Cookies: • Characteristics: Known for its sweet and cookie-like aroma, this strain has shown remarkable aromatic qualities throughout the grow. Despite the less dense flowers, the strong scent and generous trichome coverage promise a high-quality final product. • Harvest Expectations: Sweet, aromatic buds with a rich flavor profile. The slower drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ The aroma of a cannabis plant can be a strong indicator of its final flavor profile. Strains like Auto Fat Pete’s Cookies, with their unique and strong scents, often translate these aromas into delicious, flavorful buds. For a detailed grow guide and to see this strain in action, head over to my YouTube channel! 🎥✨ I share tips, tricks, and in-depth reviews to help you get the best results from your grow. This week’s harvest has been particularly intriguing, and I’ll be explaining the reasons behind the less dense flowers in detail. 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Fat Pete’s Cookies at Day 75 has been an interesting and rewarding experience. While the buds are not as dense as we hoped, the strong aroma and generous trichome coverage give us high hopes for the final product. With the plant now drying, we’re eagerly awaiting the final outcome. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a sweet and aromatic harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #FatPetesCookies #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT7-DOGDOCTROSO 17% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off

-good week of bulking up -NYC Sour D is still getting taller, gonna have a good canopy -both plants gulping a gallon a day out of the sip pots. -Growdots and recharge. so weird not putting nute in the water.

Very good. Decresing the humidity to 45 %

Amnesia is 5 weeks today. Lots to say about this one, as expected she is big and bendy, so bendy in fact that I was able to try out my new LST clips on her and they work pretty well, able to ben the branches 90 degrees without snapping and the clips hold it all in place instead of trying to stand up again. I was even able to use them on the much more rigid Jack47. So this enabled me to have a scrog effect. The flowers are coming along fast. Can't wait to see how this ends up. The Jack 47 is not too rigid but it's thick branches would normally just be left till they grow long enough to try and bend them out a bit without snapping them off at the stem. However I was even able to get some LST clips into this and form a lower canopy with the two topped branches coming out the top. I may also flatten them out later depending on what happens. Now that she is flipping I'm expecting some good growth next week, but I don't know, never grown this one before, my LST work made all the beautiful large lower fan leaves point downwards, I removed them all today. Gorilla Cookies, what to say about this genetic monstrosity, she it beginning to stretch. The only reason I'm not throwing this out is that I want to be certain that it is a Gorilla Cookie, because I planted a replacement bean, and it looks completely normal. I thought the fat leaves on the Gorilla was good when I first saw it, until I realised it wasn't.

Eine Riesige Menge Saftiger Wohlriechende Blüten. Zum Schluss nochmal richtig geschossen. Sehr schön alles in super 👌 jetzt kommt das Trocknen. Melde mich nochmals mit Gewicht und Geschmack👌

Día 29, estoy ya un poco alucinado, es día 29 y no paran de crecer...he cambiado el agua he Intento subir un poco el ppm al agua, y me da excesos... Así que decido dejarlo bajo a 300ppm y creo que lo voy a dejar así hasta el final... Llevan enzimas de limpieza que descomponen el abono así que dejaré que se auto alimenten porque van super bien ... Haber si pasan hambre.. pero no lo veo claro...en fin no me quiero pasar en el engorde meterle mucho abono y están super verdes bonitas, y florecen a lo bestia así que dejaré que se consuman un poco el abono de las hojas... Día 36 veo que empiezan a tener carencia de magnesio y calcio, he añadido no sé, una locura de magnesio y calcio, también melaza, ácidos fulvicos y humicos y pk bastante.. lo fui subiendo de 150ppm a 400ppm y vi que se lo comían rápido y subían las hojas , al fondo vi que se empezaban a quemar las hojas y algunos pelos por falta de magnesio y calcio así, que me volví loco... De 400 ppm a 800ppm va cargada a tope... espero ahora no causar ningún exceso ... Mañana miraré como reaccionan a la bomba que les he metido van a tope al máximo, si veo que tienen exceso ,no habrá otro remedio que bajar ppm quitando y metiendo agua limpia, y si veo que van bien en las dejo... En teoría voy bajo de ppm tendría que ir a 1200ppm como mínimo, para la semana que voy y más si le añado co2... Pero bueno iré con 800ppm si veo que va bien lo dejo si veo que piden más le añadiré , de momento mañana investigaré... 😅😅 Día 37 por mucho que ayer les metí, más magnesio encimas ácidos fulvicos etc... No he visto ningún cambio... Así que he vuelto a indagar en el tema.... Y creo que más bien tienen carencia aparte del magnesio y calcio, tenían carencia de posforo y potasio, así que como no, me he vuelto loco echándole pk.... Tenía una ppm de 450 se lo subí a 800 y empezaron a subir las hojas, estaban como apagadas ... Total que me vine arriba y les he metido casi 1400 de ppm de sopetón... Así que mañana una de dos, o están quemadas por exceso , ( que no me extrañaría...) o están las hojas buscando la luz y engordando como locas.... Bueno como dije al principio del diario aprendo del error acierto... Y bueno ya se que en la 3 semanas de floración piden ya magnesio calcio y pk , el calcio magnesio que tenía , tenía nitrógeno y me dio exceso por eso estaban un poco con garra... Está vez he comprado calmag de biobizz que es orgánico y no contiene nitrógeno o eso e entendido... Pero si tiene será orgánico... En fin espero que en las k1 tizane no tener muchos problemas de nutrición he comprado un pack biobizz todo orgánico ....

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Last week's vidoe. For some reason, it's taking like minutes to upload thirty second videos. I will try my best to show the updated videos on a lot of these plants.Now i'm impressed with a lot of my autos growing in this naturally derived nutrient.Solution

One of 4 strains grown together in 0.36m² using Migro Array 2 (125W). Variable dimming: W1 60%/24h, W2-10-11-12 60%/20h, W3-5-8-9-13 80%/20h, W6-7 100%/20h. Average real consumption: 95W with 173.6 kWh total. STRAIN: Divine Seeds genetics - underrated breeders producing excellent quality! NUTRIENTS: Full Biotabs bacterial line - positively surprised by the results! Organic living soil approach. GROWING APPROACH: Focused on DLI (calculated from Migro’s PAR map), VPD, water temperature, and water resting time. Did NOT monitor pH, EC, CO₂, or use PAR meter. MY BEST HARVEST SO FAR! 🏆 COLLECTIVE METRICS (4 plants total): • Total dry weight: 210g (+ 10g bubble hash) • Total wet weight: 890g • g/watt: 2.21 (or 2.31 with hash) • g/m²: 583 (or 611 with hash) • Average per plant: 52.5g Individual weights: Fractal 55g, Northern Lights 54g, Black Opium 67g (best performer!), Moon Rock 34g. Dense and resinous buds. Additionally grew 3 outdoor plants (Fractal #2: 21g + 60g frozen, Northern Lights #2: 14g + frozen, Black Opium #2: 50g fresh frozen) - not included. ~300g frozen trim (indoor+outdoor) yielded ~10g bubble hash. Good luck to everyone in the contest! 🍀

So week 8 has gone by like the others nice and easy although I cant help but think that she is well behind where she should be, on the packet it says 11 weeks to harvest but I cant see her packing on enough bud in 3 weeks to be ready for the chop... im in no rush to chop her down but cant help feel a bit anxious that I have gone wrong somewhere... She is now sharing a tent with some GSC so a new diary will be going up for that in the coming week or so... Thanks for popping by again guys and girls Stay safe out there and Happy growing all...