Going to be harvested in a couple of days

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 Its been an awesome week! (despite some grow room power issues)... the SP-3000 makes for some of the easiest grows we've ever had. Our plants look super happy and they pray nonstop to Mars..This light has made our little 4x2 my favorite place to flower Check out some of our previous harvests under the SP-3000, we have stellar results using it.. Mars has completely changed how we view LED.. We've officially replaced all HID lighting for MarsHydro fixtures and our only real complaint is not doing this sooner 🤘😼 The Ghost Candy's flower stretch was pretty close to what we expected from them. They have a great, uniform color and bud sites are starting to form.. being soilless these girls are eating a little bit with almost every watering.. we have 2 distinct phenos, 3:4 have a more broad indica hybrid looking fans, where 1:4 appears sativa dom, we'll be sure to clone each..not too much else to report, good genetics and light make for easy weeks..thanks as always for dropping by and happy harvests everyone!!! 💡🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Queste grape ape sono cresciute benissimo la qualità è più che buona..per la mia patologia funziona benissimo. Molto efficace...sé ritrovo i semi la rifarò

Grew very fast - typical for Sweet Seeds - and really nice dense buds. Looking forward to vaping this :)

Big heavy buds...

So this week happened a little bit more. All of them got their final BioTabs Mix. Each Plant 500ml of Water with 1g Bactrex and 20ml Orgatrex. No more fertilizer now from the BioTabs Starterset, all they get now is BioTabs Bio PK 5-8 in flowering for thicker buds. Thought it would be a good idea to buy that, will see if it makes a difference. And as you can see i did defoliate them this week also. So much more airflow, finally i can see everything and can worry less about pest and so on. I just hope i didn't do it wrong or did too much of it, it was really scary just cutting off things which grew for such a long time, but i think for the first time it turned out pretty good. In flowering week 3, when i give them PK 5-8 for the first time, i will also defoliate them once more a little bit when it gets out of hand again. Since the biggest plant is about 45cm tall now i will start flowering soon but don't know yet when exactly, maybe a few days, maybe another week, until then they also had enough time to recover from defoliating and i hope everything will work out. Would also be good to get about 5-6cm more on the other plants, so i guess i will do it around Wednesday, but i will see. As you can see the scrog net is installed again, so this time i will pull them through the net and let it in for better division until the end. Really looking forward to my first flowering phase and how they will stretch out, kinda scared too :D See you next week :)

Day 47: The Ladies are starting to fade a little. Some of them are showing their potential to get some beautiful colors.

Starting week 14 Feeding the lady her last meal @1900ppm bloom nutes Day 94 ( Day 3 from. Week 14) Day 95 and Day 96 Very well, almost ready to flush again Day 97 Growing fat and smelling so good Full of Trichomes and resin Day 98 End of week 14

Hi All, The week was pretty uneventful, the plant is developing nicely. I removed a leave here and there to make sure maximum light exposure in the middle of the canopy is guaranteed. The buds stopped stretching so I’ll will stop with the boost and add the pk 13/14 to help with the fattening. Dried and smoked a few of the lowest popcorn buds and they are by all means not there, but smell and taste pretty awesome. I have also added a few pictures of the new box that I have built for the cuttings. The box was build pretty low budget, however I will still need to add a better light source as I am currently running on only 60W veg lights. Was planning to buy the Greenception GCx5solo 150W full spectrum LED, as it would fit exactly Inside the box.

Day 29. Best from all but very sensitive to nitrogen, pot is still full and as she takes over all of it , she constantly have few overdose issues. Very responsive to leaf tucking , stem twisting, forms nice canopy, will be biggest producer no doubts in this run. Will try to bend main stem with some LST in few days. Mars TS1000 - Light is solid and does job. For last week output is on max . Still rotate a lot, but am happy with development. I miss more good wind inside, but i live in shared house ;)))))))))))) even really silent air system is still loud on desired speeds ... Hope next week ill send her to flower. Will top up with Worm Castings and Mycorrhizae during training in few days, when girls will be watered next time. Rhythm is good, every 3 days pots are light. 1.5 liters to each went straight in after photo shoot. Day 31. Applied BioBizz Leaf Coat when lights went off. Loads of training was made today too. Day 33. Now girls are trained daily. Top shoot twisting, leaf tucking, rotation around axis , changing positions inside of tent and so on. Always wash hands before any training, it is a must. Still havent made mind, scrog or lst ... Think tomorrow will be watering day and i have to decide which way to go , i am fliping them at next watering 100%, otherwise again rush to harvest before late spring holidays ... Happy Growing !!!

Can’t wait 🔥🌬️💨💨💨🍃🍃🍃🍃🍃🍃🍃🍃🍃

Una experiencia realmente buena toda una gozada os la recomiendo Farmers!🍯🌈🍨🍓🍌

Been rough last 3 weeks 3 storms 3 power failures lasted 3 days each time. Figured, I do harvest before the 4th storm coming in tonite. 9 days lost..vegging 2 clones for out doors 8 weeks to train.... Patients, timing is critical hopeing to transplant mid to late may. (Unless I put up cold frame). 06/17/2018 smoked my last bud today. Cutting clones soon,to grow,and trade might get Jack The Ripper (TGA) cutting,and LSD photperiod cutting as well.

Tropicanna Poison XL Auto- Outside W10F6 8/17-23 This past week has been rainy and overcast from a tropical storm with temperatures mostly in the upper 80s. We have Hurricane Erin approaching the Bahamas heading northeast with wind gusts of 30-40 MPH. While we won’t be directly hit by the storm, we will get the outer bands of heavy winds and rain. To protect my plants, I brought all the girls inside on Tuesday 19th in preps for the storm. I inspected each one for bugs, rot or anything unusual. She is free and clear of any rot or bugs 8/19 Tropicanna Poison XL auto is 53 days from germination. Sweet Seeds says 60-75 days to harvest so she needs about a week more. Next week with the hurricane approaching, we are expecting rain for most of the week. Given the pending weather conditions for the next couple of weeks, the remainder of the grow will be in the tent where I can control the environment. I also will be using the air conditioner to drop nighttime temperature and maybe bring out pink and red colors. The stems show pink so I’m hopeful. Thank you all for your continued support and encouragement. Your likes and comments motivate me to keep sharing my journey. Stay green, growers love 💚🌿 💫Natrona💫

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.