Pretty happy with the results so far. Tried lollipopping a few of them. Also removed one from tent and placed outside possible fungi rusted leafs maybe cal mag?

Day 90 The Sativa plant is beautifully swollen at the top. I've watered it minimally for the last three days. Today I'll mix up the solution and add a 1 g/l Bio Enchanter. It's alkaline (pH 8), so I'll first dilute 15 liters of the solution with 2 ml/l CalMag in the aquapot to 250 PPM. Then I'll lower the pH to 5.0, as recommended by the fertilizer manufacturer. After that, I'll dissolve a capful—one and a half liters of black powder. These 15 liters should be used within 24 hours. My slightly drying bushes will appreciate a third of the pot's volume being watered. The stems are showing red spots—it looks like I need to add 1-2 g/l Bio Bloom to the coco and mix 2-5 liters of the coco into the top layer. After bending and pruning, the plants feel stronger and healthier. To correct the nitrogen deficiency, I'll also add a liter of Simplex Start Up 4 ml/l.

Gracias al equipo de AnesiaSeeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Oracle Octane: Oracle Octane es una cepa altamente potente y con un alto contenido de THC elaborada a partir de una Blackberry Octane seleccionada, excepcionalmente rica en THC y aromática, y de la pesada Blackberry Oracle, inédita, de nuestro propio acervo genético. El desarrollo de esta carismática e impresionante variedad abarcó 8 generaciones y un enorme esfuerzo de cría. La variedad tiene un sabor intenso e inolvidable que recuerda a bayas dulces y limones frescos. Las plantas a partir de semillas crecen increíblemente hermosas y sus hojas y cogollos a menudo desarrollan tonos de rojo, morado intenso e incluso casi negro. Esta cepa vigorosa y ligeramente índica dominante tiene un tiempo de floración de unas 9 semanas, produce hojas grandes y alcanza una altura de unos 120-130 cm en el interior. 🌻🚀 Consigue aqui tus semillas: https://anesiaseeds.com/product/oracle-octane/ 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 4: Aparecieron un monton de erizos esta semana, el temporal ha hecho algo de mella en la carpa al bajar las temperaturas aunque todo sigue correcto. Continuamos con las dosis de nutrientes recomendadas por el fabricante.

Si vous avez la moindre question n'hésitez pas à me contacter. La préparation des boutures est assez simple, il existe plein de guide pour les réaliser, contactez moi si vous rencontrez un problème. Ce qui est important c'est de partir d'une plante saine, ne présentant pas de carences. Si les branches ou feuilles de vos plantes ont un aspect/toucher étrange, il faut vous assurer de régler le problème avant de prélever vos boutures pour vous assurer de la réussite finale. En cas de carence sur vos pieds mères vous pouvez utiliser Revive et B-52 en foliaire et en irrigation pour régler le problème! J'ai donc fais une pulvérisation foliaire le jour précédent les boutures pour m'assurer de leur santé et également une pulvérisation de B-52 sur la plante mère après l'opération de taille! Une fois les bouture réalisé j'ai pulvérisé avec un mélange Voodoo/Tarantula/Piranha pour m'assurer qu'aucune bactérie ou champignon ne puisse venir infecter mes clones. J'ai utilisé des Rockwool Cube et je déconseille. Je trouve que l'enracinement est beaucoup plus difficile qu'avec Root it ou Root Riot de Growth Technology! Le processus dure environ 10 à 15 jours pour l'enracinement et il faut compter encore 5 à 7 jours pour l'enracinement dans le pot 1L. A ce stade les plantes sont enfin enraciner et prêtes à commencer leur croissance!

Plant 2 harvested 8.5 weeks from seed to harvest Plant 1 harvested 9 weeks from seed to harvest These ones swelled up and grew at lightning speed compared to the rest... wish that third seed had germinated now ;) I'm putting Ripper Seeds autos up in the top spot for now, 100% - this and Zombie Kush auto grow last year have been huge yields and really fast to grow. They just have these immense top colas (for those who prefer to leave the plant untouched - I don't do anything to my plants, no defoliation, LST, etc. Mostly because I'm really lazy when it comes to these things.

Helloing👋🏻friends and visitors. Clones have been stretching reasonably. So far so good 😊 Feeding: Wed:8thNov 3L each with nuts ph'd 6.3 Sat:11thNov 2L each water only ph'd 6.4 ------------------/////-----/////----- Did some defoliation here and there and some more today as per last 2 pictures. Many Bud sites, this shall be an interesting sight when in full bloom😋 Clone#3 soil media still wet from Saturday's watering 🤔 Swapped her around with Clone#2 Will see if that changes anything.. i might have to add a fan pointing out that way far right of the GT Had same issue when growing my black buds🤔🤔🤔🤔🤔 That's it for now folks!! Thanks for stopping by, likes and comments are appreciated 😉 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨

[DAY 78] - 12/12/2022 - TS1000 40 cm distance - 100% dimmer: 144 watt; - Light cycle 20/4; - Height: 74 cm from clay (the other one is 83 cm from clay); - 24° C - 60% RH during light - 19° C - 70% RH during night; - EC 1.7- PH 5.9. [DAY 79] - 13/12/2022 - 24° C - 60% RH during light - 19° C - 70% RH during night; - EC 1.5- PH 5.9. [DAY 80] - 14/12/2022 - 24° C - 65% RH during light - 19° C - 80% RH during night; - EC 1.4 - PH 6. [DAY 81] - 15/12/2022 - 22.5° C - 73% RH during light - 19° C - 80% RH during night; - EC 1.4 - PH 6.1; - Defoliation. [DAY 82] - 16/12/2022 - 22.5° C - 70% RH during light - 20° C - 80% RH during night; - EC 1.4 - PH 5.9; - Pretty fine, some spots here and there on the leaves. [DAY 83] - 17/12/2022 - 22.5° C - 70% RH during light - 20° C - 80% RH during night; - FLUSH EC 0.3 for 24 h. [DAY 84] - 18/12/2022 - 22.5° C - 70% RH during light - 20° C - 80% RH during night; - EC 1 - PH 6.

Sanlight EVO 3-60 at 80% Day 120: looking good and watered again🌊. Watered with rain water, 1 ml/l Cal Mag, and 1 ml/l Green Sensation Day 123: looking good and watered 🌊. Watered with rain water and 1 ml/l Hesi Boost, 1 ml/l Cal Mag, and 1 ml/l Green Sensation. EC at 1.0 and a pH of 6.4 . Day 126: looking good and watered again. Watered with rain water and 1ml/l Powerzyme, 1 ml/l Hesi Boost, 1 ml/l Cal Mag, 1 ml/l Bloom Complex and 1 ml/l Green Sensation. EC at 1.0 and a pH of 6.4.

You walk into the back yard and it’s a straight face punch of smells. Looking like some indoor rn moved all plants to safer place in case storm hits so now I atleast have a wind break

Bobbing along, no vertical growth this week. A little more leaf tip nutrient damage so I diluted the nutrient water down. A few brown pistils, say 5 %, if I was a betting man I'd say 3 weeks till harvest. Expect my crystal ball prediction will be well off the mark!

These budz are looking amazing

They are 43.5 and 50 cm tall. One headed is the bigger one now but two headed seems more mature. Both doing good and with white buds, they look almost the same so far. I run out of Bloom Complex Soil so i'm giving them a new nutrient, Powder feeding by Green House Seed Co. Sativa version. I hope they grow and develop fast because is summer time and i wanna go somewhere else xD Added a video of each plant, i hope you enjoy 😺

The lady's are looking good🍭🍬🤪

Day 99 07/10/24 Monday Flushing this week Using de-chlorinated tap water 10L pH 6 with Flawless finish. Seeing her finalise and ripen this week will be satisfying 😍 Watching her colours transform, she's just stunning 👌 Picture and video update 📸 Day 101 09/10/24 Wednesday De-chlorinated tap water pH 6 only today. Day 103 11/10/24 Friday De-chlorinated tap water pH 6 only today again pH 6. Only 1.5L Day 104 12/10/24 Saturday Another Flush today, using 10L de-chlorinated tap water pH 6 with flawless finish. She really has darkened in colour now, fans showing a deep dark Purple / Black, the buds themselves are a deep dark purple, and absolutely laced with trichomes 🤤 Picture update tonight📸💚

26.06 After connecting the air conditioner, the temperature stabilized and I have differences of about 7-8 degrees between day and night. Today I replaced one mixing fan, because the well-deserved Chinese one has already lost its power. He served almost 2 years, which is a really good result. I replaced it with High Pro, none of them lasted as long as the Chinese one. The plants look very nice, I haven't noticed excessive activity of Sciara militaris. Soil Attack and yellow sticks do the job. Humidity 53% 27.06 The stems have regenerated nicely, but I'm still going to hold the knees a bit to strengthen them. I added water from Soil Attack. They swell beautifully, the hair on the flowers is very long, which means good adaptation. Water 2L. Humidity 63% 2.07 I measured the amount of PPFD at peak places and they were too low. So I lowered the lamps. I added a small dose of Power Silica to strengthen the stems, because after super cropping the plants may have a problem with maintaining the top. The conditions are good. Day 28-29 degrees, night 19-21. Humidity from 54-63%. At this stage, I can easily maintain such humidity, especially since I have well-mixed air in the tent.

Really happy with how she’s turning out with massive bulking in this last stretch! GC is an amazing strain that I’d highly recommend to anyone looking for something very unique! Flushes are all done and we have about a week or two left, trichomes are all still very clear under the microscope want to wait for some borderline ambering before I chop her.

Hello everyone, update from 4.7 2026 this week I will harvest purple feno lemon nr.1.Lemon nr.2 (green feno) needs a few more days maybe weeks. Lemon nr.3 is still producing a lot of fresh white pistils. I'm not sure if it's just the genetics or if the Power Buds is starting to have an effect :) I checked the trichomes under a microscope. They're mostly cloudy, and the ones on the top buds are just beginning to turn amber. I'm probably going to do a staggered harvest. The top buds first, then the lower ones a few days later. It really swelled up in the final stage of flowering. For scale, I've included a 500 ml Plagron bottle in the photo. Strawberry Gorilla – I have five plants, and every single one has a completely different bud structure. My favorite is Gorilla nr2.It has smaller buds, but they're rock-hard, dense, and absolutely covered in resin. We'll see what the others have to offer—they're looking great too. Compared to the purple Lemons, they're about two weeks behind in flowering.

FBT 2401 is doing great. She got her first lst a few days ago. Looks like the diluted solution worked well. She has started making good progress. Thank you Fast Buds. 🤜🏻🤛🏻🌱🌱🌱