Recommended
Likes
Comments
Share
Subo estas fotos 5 días después de la última semana...crecieron un poco más los cogollos, las plantas están en buen estado.
Likes
6
Share
Few days ago I refreshed the soil with compost and humus and that’s it
Processing
Likes
57
Share
Hey everyone 😀. Another veggie week goes by and they are developing surprisingly well 😃. Both phenotypes look very nice and have a perfect leaf green. Both were topped again. I wish you lots of fun with the update, and stay healthy 🙏🏻🍀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
38
Share
Baox plants got topped last week for clone cuttings, so they lost a few inches. I got 5 clones out of the 2 plants. I probably could have cut more, but lets see how these first few turn out first. These girls seem fine since the cuttings.
Likes
47
Share
@Natrona
Follow
Divine Seeds Auto Candy Outside Grow Contest 👉Sponsored👈 W5F1 July 6-12 We had a break in the temperatures and humidity this week. It’s been in the 80s and Iow 90’s. It’s still hot but the heat index remained below 100. Auto Candy had a growth spurt this week doubling her size from all the rain and heat. She is 12.5 inches tall and so far, doesn’t mind the heat and humidity. My little candy girl is becoming a lady. Little white pistils appeared at the nodes. Bring on the flowers. I give water only from the well and I do not ph. , Fingers crossed she will be strong and take the heat like a champ. As aways, thank you all for stopping by, for the likes and most of al growers’ love and support. Stay green, growers love 💚🌿 💫Natrona💫
Likes
6
Share
De Daily High Club is niet voor niks even weg geweest, achter de schermen zijn we ontzettend druk bezig om de content van onze members te verzamelen, te bewerken en al het materiaal tot zijn recht te laten komen. Als team zijn we hier ontzettend druk mee bezig maar als club houden we hiervan, we zijn dankbaar dat we samen met jullie de community een stukje leuker en beter te maken. We krijgen alleen maar Love van onze members en we zijn jullie ontzettend dankbaar. Welkom bij de Club! Deze grow is een van de test grows van Yaramang, hij zal onze voornaamste grower zijn. Hij is net als velen van jullie verliefd geraakt op de hobby en we vinden het leuk deze samenwerking te mogen aankondigen met hem. Voor deze Grow hebben we Mephisto Genetics zaadjes besteld (zij zijn 1 van de eerste seedbanks die Autoflower zaden produceerde met ontzettend hoge THC-gehaltes van boven de 20%, wij wilden onze Nederlandse Growers hier wel eens van laten genieten. Autoflowers blijven ontzettend makkelijk en uit ervaring horen we dat wanneer je AF op de juiste manier kweekt je er genoeg groen plezier van zult hebben! Heel veel plezier van de eerste test-grow van Yaramang. Powered by Daily High Club Zoals iedere kweek begin ik met de koffie filter techniek. Ik pak een simpele koffiefilter van de Aldi, (ander merk werkt waarschijnlijk ook) maak deze volledig nat door hem 1 keer heen en weer te halen onder de kaart en doe het zaadje met de punt naar beneden (of iets wat zo veel mogelijk op een punt lijkt, ervaring blijkt dat 25% alsnog verkeer omzit en het zonder problemen overleefd) en vouw de koffiefilter dicht maar niet dat de vouwrand tegen het zaadje aankomt. De filter stop ik in een huishoudzakje die je kunt sluiten en sluit deze voor ongeveer 75% met de koffiefilter erin. Dit zakje leg ik in een donkere doos (zo'n "luxe" schuifdoos van Apple want die is helemaal donker) met de deksel erop en die doe ik in een donkere nachtkastje. Om de temperatuur te meten heb ik een temperatuur meter in hetzelfde doosje gelegd. Om de perfecte geadviseerde temperatuur tussen de 23-26 graden te hebben leg ik mijn Deco (modem) onder de doos zodat het doosje eigenlijk constant de perfecte temperatuur van 25 graden heeft. Na de eerste dag zag ik al een paar witte puntjes verschijnen door eventjes met een lamp door de filter en het zakje heen te kijken en binnen 48 uur zie je al dat de wortel zo'n 1 tot soms wel 3cm al is. Wanneer het witte worteltje ongeveer zo groot is als een vingertop is het tijd om te zaaien.
Likes
10
Share
8/21/24 1tsp foundation which is cal mag. 2 tsp bloom and 3 tsp grow. she is a super leafy plant. defoliated quite a bit and cleaned up underneath for the larfy stuff.
Likes
7
Share
@cg_grow
Follow
Gran Jefa is definitely the biggest. 🍋 🍊 already shows that she probably will be the tallest... ...and she is the first that got fimmed (on day 16 since they sprouted out of the soil.)
Likes
8
Share
Week 14 - July 30 Last vegetation weeks. On 4 plants: 2 healthy / 2 injured. Royal Moby and GMOxZombieK were seriously contaminated with aphids. To stop the propagation I did many washes with black soap and neem oil but may be I treated at the wrong time: morning, even soon; is too late by a hot sunny summer day. I think the 2 plants are suffering from sunburn… and they still have aphids… I stopped soap treatments and try another recipe which seems working very good against aphids and revitalizing all plants: spraying Garlic + Laurel -I cooked separately during 1h garlic (5 cloves) and Lauren leaves (12) in approximately 1L of water -filtered the preparations and wait 4 days -for 1L of water to spray: 15cl garlic mixture + 5 cl laurel BEWARE: checking Ph… last year I burned plants with garlic + chili mixture: it was catastrophic. Brake Pad Breath and Flash Back are beautiful and healthy. Aphids aren’t interested by this 2 plants. I did preventive treatments Neem oil and soap but not so much. Good reaction to the Garlic+Laurel. Plants are bushy, densely ramified. Deep green color, the female sexual signs are visible. Ready for flowering. Watering with a little bit of nutrients 1.5L/plants each 2 or 3 days Defoliation Now I quit the “garden” for 7 days…traveling to Amsterdam (NL) and Prague (CZ) for holidays. I installed automatic watering systems (Blumat) and sticky traps, locked the veranda, programmed the Ventilation and crossed fingers. I’m not afraid about heat or dry…. More about pests and diseases….and rubbery too cause I have 6 auto flowering quasi ready. I’m writing this in Prague, returning in my country to the west side in 2 days. After smoking lot of joints in Amsterdam (3 days) Amnesia haze Tangerine dream Kush Mints Super Lemon Haze Dynamite cookie Intergalactic toad Super Silver Haze In Prague Weed (THC) is prohibited. But I discovered that you can buy pre roll joints (100% pure hemp-Thc-sativa, hybrid etc…) in strange gifts shops for 6€. It’s really not the best weed but it’s Strong and easygoing.
Likes
14
Share
@BLAZED
Follow
Week 12 (3-10 to 9-10) 3-10 Temperature: 27.5 degrees (lights on) 20 degrees (lights off) Humidity: 86% (highest) 60% (lowest) Watering: 1200 ml. PH 6.4 EC: 1.8 (with Hybrids & PK+) 4-10 Temperature: 27.3 degrees (lights on) 19.8 degrees (lights off) Humidity: 72% (highest) 55% (lowest) Watering: None. 5-10 Temperature: 25.8 degrees (lights on) 19.5 degrees (lights off) Humidity: 80% (highest) 82% (lowest) Watering: 700 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) Last night i accidentally let the light at 20% strength, so the whole day the light was on the lowest wattage. 6-10 Temperature: 28.6 degrees (lights on) 21.1 degrees (lights off) Humidity: 81% (highest) 56% (lowest) Watering: 1000 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 7-10 Watering: None. 8-10 Temperature: 27.4 degrees (lights on) 18.4 degrees (lights off) Humidity: 85% (highest) 53% (lowest) Watering: 1300 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+) 9-10 Temperature: 27.9 degrees (lights on) 19.4 degrees (lights off) Humidity: 80% (highest) 52% (lowest) Watering: 1000 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+)
Likes
11
Share
@Warhead
Follow
Buds are fattening and getting frostier. Figured I would do a little flyover to give a better idea of size. Hopefully a harvest next week. Until then! 🌱🌳🔥💨
Likes
14
Share
Grüßt euch Freunde! Heute ist der vorletzte Tag der Woche 6. Die Blüten entwickeln sich prächtig und Resin ist ordentlich vorhanden. Man kann schön sehen wie die Blätter langsam ‚faden‘ . Ziel ist: am Ende alle übrigen Nährstoffe verbraucht zu haben, sodass wir einen angenehmen smoke bekommen. Werde daher die nährstoffzufuhr einstellen und sie das verbrauchen lassen, was noch in Boden und Blättern gespeichert ist. Bin der Meinung, dass davon einfach noch genug gespeichert ist. Wer da andere Erfahrungen gemacht hat, kann das gerne mal kommentieren! Bis dahin euch allen eine gute Woche !💚
Likes
2
Share
@PalmaGrow
Follow
Se inicia nueva semana con transplante a maceta final donde se orientará las ramas para maximizar producción 21 - 27 julio
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
15
Share
Hey what’s up fellas ✌️ Week 2 of flowering, I have trim the legs by cutting all the small shoots in the bottom that won’t reach the canopy. And removing some few big fans leaves that are covering some lower shoots. I gave them a lil bit of nutrients during this week, last time was about 13 days ago. Just to support the stretch. Keeping an eye on the plants is the best way to know when to feed them. Lights are at max level now, all the ladies should have plenty enough space to grow without reaching the cooking zone. The Mars-Hydro led is just a bit lower and closer as it produces less heat. ✅New Growers Tips✅ ✅Trim your plants legs, don’t waste energy on the bottom popcorn buds. ✅Your plants are stretching, they need Nitrogen, stick to your Grow/Veg. nutrients ✅Always pop more seeds than expected to grow, look at the shitty plants in the middle between the 2 scrog in the video, those plants were germinated same day than the ones in the scrog... Keep the best phenotypes and put the shitty ones at the trash. That’s all for this week 😉 Stay tuned for the Jungle Show 😂👍 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)
Likes
30
Share
@eurorack
Follow
Its amazing how tall these plants are getting, the topped one is just as tall as the non-topped. Flipped these to 12/12 last weekend, no sign of flower yet, added some p/k to the last watering. Slight burning on top leaf tips which I'm guessing is because of it growing closer to the light, I'll have to work out a way to shorten the light hangers.
Likes
49
Share
IVE MADE MORE VIDEOS BUT THEY JUST DON'T SEEM TO UPLOAD AND IT'S FAR TO SLOW TO DO IT FROM HOME 6/27 Made last week a five day week to get back on track. It's still overcast and rainy. It's not raining a lot bit it's consistent. Despite the weather the plants are doing phenomenal. I'll update later. It's 1pm. It's been raining consistently since 11. Just a sprinkle but it's steady. I'm going to begun uploading the weeks weather on my diary. I may start a new diary for the plants I light depped as they are flowering pretty good. Rain stopped and it's just overcast for now. I looked at some videos and did a comparison of videos one week ago and videos today and HOLY SHIT! WHAT A DIFFERENCE. Especially the light depped 10th planet. Well everything but that was the most significant difference. I'm astonished at the health and growth despite the crummy weather. Continued to rain. Just got harder. Plants are taking it but it's flooding underneath the pallets a little but it will be fine. The light dep however has me concerned. The 10th planet is looking spectacular. The bigger purple punch I'd looking good too. The smaller one though looks to have a pollen sack coming off one of the branches. Considering its not on the otherside I assume it's not just a swollen calyx. I don't mind chucking it especially if that means I don't hurt my other girls so I want to make sure. I sent videos to a few other growers and I'll add a question on here. Those three plants have been isolated from the rest for a few days due to rain. I have the suspect isolated alone until I can confirm. It sucks cause the light Depp was going good and the6ve all got little flowers. 6/28 Well that fucking sucks. ALL THREE plants I tried to light depp hermed on me. I could see male flowers. Luckily I had been keeping a really good eye on them and it was preflowers mostly. At least I caught it. One or two stamines on each plant. Would've been really easy to miss. Only one had STARTED to elongate into a stem so I think I caught it early enough. Plus since all this rain they've been kept in a different location then my big girls. Glad I did that now. Boy the roots looked good on those plants. I just grabbed the stalk and lifted and it came right out of the pot. I held it there admiring it for a minute. This sucks. At least the real plants are doing good. As far as I know. No male preflowers that's for sure. I've got some feedback from other growers and the videos are a little blurry but I had found a light leak and I'm certain these plants hermed. I know I could've tried to save them but I didn't want to risk it. I compared what I was seeing with Google photos and other websites. Aside from the larger ball with its stem, there were also several little bumps besides developed calyxes that were weaving into little buds. Trust me that I wouldn't cut down my plants if I wasn't 110% sure. I might've been able to "save them" but to me it's just not worth the risk. 6/29 I was second guessing myself pretty hard last night due to some responses I got on my light dep and messages I got from other growets. Made my anxiety horrible but I looked on several video's I'd taken again and I know what I saw. I felt better after that. This was after I researched and waited THREE days until I saw the ball on the stem and the groupings of small nubs under a fresh yellow flower. These plants were flowering good and it sucks to lose them. One MAY have been ok but one was a runt and had all the characteristics of a true hermaphrodite. They were only in 3's and I couldn't risk my harvest for an experiment. Still sucks. Oh well. Sun is starting to come out. Plants seem to be doing fantastic. I have one spot on a leaf that looks like a pillar munched on a leaf so I'll probably get the bt out soon as I have a dry day that I can apply it. I'll have to check the weather. I need to start a nute regiment but the plants aren't telling me they need anything yet. 6/30 I fucked up dates or dodnt do it yesterday or it didnt save right so I'm leaving this blank today is the 1st. 7/1 I have still only watered s couple times and I haven't had to feed. This week I'm going to start nutes. I had some external ersonal situations that have kept me from my plants. I'm hoping to get back on track. I noticed some pillar damage so I'll need to dig out the BT. This morning I saw this giant ground hog by my cage. Hated too but had to get rid of him. Of course some of the blowback landed on the leaves of one of my plants. I tried to clean it as best I could. Better than that fat bastard eating everything in one night. I broke a branch either falling around it or bulling through when I was pissed or I LST it the wrong way and the wind broke it against the tomato cage. Nice big branch too on top. I tried to fix it with duct tape but we'll see. The plants need me to spend sometime with them. I need to clean them up. Apply bt and give them their first feeding. I'll update as I go. They don't seem nutrient deficient by any means but I don't think it would hurt to start the nutes. 7/2 Bags were lighter today and if it wasn't going to rain tonight and tomorrow I'd he watering. Plants look great so soil isn't depleted yet I guess. They're growing rather rapidly. The branch I broke didnt make it. Had an idea it wouldn't but I had to try. I waited on the BT on account of the rain. I may go back over and change my mind and water with silica or a mild nute solution or maybe apply the BT. Depends what time I get back. I have some work I need to do over there. There's a few that I need to clean up the bottoms on. Pest damage is minor and limited to one or two plants and a leaf or two only. 7/3 More rain. It was supposed to rain this morning too but it didn't. We got .33in yesterday and through last night so I thought that was ok. Looking back on my previous diaries I'm doing things significantly different than before. I had used a lot more nutes earlier on. This morning I mixed two gallons of 2tsp of big bloom and fed it to the 9 plants in smart pots leaving the container plants as they have much more water in them. Looking back at other diaries I previously had, WPM and septoria by this time not to mention a shit ton of other pests I was fighting by this time. Since I poisoned where the cagexwas multiple times and sprayed the cage before it was moved I luckily don't have that problem yet knock on wood. I'm planning to apply BT tonight to deal with the moth larvae if there are any. I'm looking at plants around this area and im seeimg SOME septoria and pm on raspberry bushes and burdock so it is around. I made sure my cage is not by any other vegetation this year and is sitting on asphalt with the bags on raised pallets. Good thing I did or I guarantee they'd be flooded by now. I've been seeing multiple complaints from maine growers online (AND THEY HAVE HEALTHY PLANTS!) saying this is the worst year ever. Maybe they need a dose of fusarium oxysporum to keep them humble. This is maine. If you don't like the weather just wait five minutes. Meanwhile I'll be doing my sun dance hoping for sun. "Hard to grow cannabis with no sunlight" said another grower on my forum.
Likes
20
Share
Endspurt 🤗 Es wird sich hier nur noch um Tage handeln🙌 dann heißt es endlich... Erntezeit😅 Es duftet herrlich und die Knospen sind ordentlich geschwollen und können noch ein kleines bisschen😉😁 Fortsetzung folgt...✌️😊💚
Processing
Likes
13
Share
Another week done, finished up week 6 of flowering, week 10 of the whole grow. The buds are continuing to fatten up, inching closer and closer to harvest. Noticed the first few Amber tricombs on some of the upper buds, going to be leaning off the big bud and switching to overdrive to help aid in ripening and the final bulk. I’d like the run them another 4 weeks giving them a full 9-10 weeks in flower. But will judge harvest on a near 45/55 or 50/50, Cloudy/amber tricomb production.