Moinsen wie man sieht geht es den Damen recht gut, sie fangen an Farbe zu bekennen. am anfang der woche gab es für alle 2,5L wasser+1L wasser mit 10ml/ Pk5-8 und eine leichte entblätterung damit die Luft besser zirkulieren kann da der mittlere Bereich des ScroG Netzes ziemlich dicht aneinander steht ansonsten war nicht viel los diese Woche. Ich denke mal das die Damen noch ca 3 Wochen brauchen werden bis sie ansatzweise fertig sind. Auf den Bildern ist es zwar nicht so gut zu erkennen aber die Damen werden lila schwarz an den blättern und die Knospen bleiben giftig grün nur die Dame vorne links hat nur kleine Flecken die sich lila zeigen aber ich denke mal das wird in der nächsten woche auch noch zu legen so lange die Temperaturen mit spielen! euch noch ne schöne woche ihr growmies

Really digging the resin production on this haze baby. She is sticky, pungent, and greasy! Easy to grow and producing for mommy. 💚🌿💚🌿. Love this plant!

The week ends Sunday Mar-1, being day 61 - week 8 of flowering since flipping the lights. From first pistils shown, it's day 45 which is a more accurate snapshot of where the plants actually are in their maturity. Started the ripening feed phase for the plant. No other nutrients or supplements added (other than enzyme). Lots of orange hairs covering the top buds and buds lower are beginning to also ripen. Trichomes are cloudy now across the canopy with a few amber. Will be monitored for any changes to initiate flushing for 2 days prior to harvesting the tops. Not much change in the buds development on the plant. The CBD has dense nugget style buds with some swelling starting. Light is maintained at 30cm above the canopy, with single daily fertigation at lights on - watering 3L per day. Fertigation pH target is 5.9-6.2 whilst flowering. Stopped the practice of fertigating at lights off due to the other pot developing a springtales infestation. Need to allow at least 2-4hrs of lights on period after fertigation. The coco is not dry but still damp on the surface after 24hrs from fertigation. Seems the plant is slowing down the amount of water intake which is expected at this stage. Trying to maintaining an average RH in the space at 50% but it's getting harder now with all flowers. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The grow setup includes; - Secret Jardin DS120W tent (120cm x 60cm x 180cm) placed inside the bedroom. Passive & active intake of air is from a closed off section of the room where the central heating boiler sits - the intake is warm air (20 degC.) and fairly dry (40% RH) during the winter months. - Mars Hydro SP250 LED light - extraction fan - AC Infinity Cloudline T6 - ventilation fans - aquarium heater - small oil heater - small dehumidifier - 20L Airpots and 3.5L general pots for seedling stage - Canna Coco substrate and nutrients - GHE Flora trio nutrients - pH and EC/TDS meters - 2x Govee Thermo/Hygro meters (one at canopy the other at the roots level)

nothing to say, she is doing good. 2 weeks to go

Sie bildet einen fetten bud und sieht sehr lecker aus

Getting closer to the end and it's showing. Upping the BioPK still a little bit. I think they'll be ready in a day or 10. A couple more rounds and I'll start flushing. Even though everybody keeps telling me flushing has been scientifically debunked, I dont really feel comfortable not doing it. Any comments on that from you guys?

Has a sweet taste to it. Again , I didn’t log any larf in the weight. Very resistant strain.

MrJones VIPARSPECTRA XS1000 LED 📜 SUMMARY - I have been given the opportunity to run the next generation of LED lights by VIPERSPECTAR, the XS1000! I set up a Stealth Cabnient and moved 3 Cream Manderain Auto XL.s under these lights, the cabinet set up is automated with WIFI light controllers, and INKBIRD Temperature and Humidity Controllers, I am very excited about this opportunity! Specs and Discount Codes Listed Below. 🔹🔹🔹🔹🔹🔹WEEKLY GOALS 🔹🔹🔹🔹🔹🔹 🌞Environment - 80F and 50%Humidity - using Humidfyer as needed. 💧 Feeding - Feeding with FOOP Canna Organic Nutrient Line 🍃Training / Keeping Stems Stable and Strait 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡 Vegetation & Flower (new) Viparspectra XS-1000 Release on March 15th. 🔹🔹🔹🔹PLANT UPDATES🔹🔹🔹🔹🔹 🌱 Plant #1 - Week 5 Flowering is starting to happen, should see more stretch this week, she is about 15 inches wide not. 🌱 Plant #2 - Week 5 Flowering is starting to happen, should see more stretch this week, she is about 12 inches wide not. 🌱 Plant #3 - Week 5 Flowering is starting to happen, should see more stretch this week, she is about 12 inches wide not. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️Monday 03.23.21 / Plants are starting to flower, I decided to defoliate and remove many of the small sucker branches, I would prefer the hormones being spent in the larger and more productive colas, I also fear that these plants may outgrow their space, we will see,I am moving the feed up to the next level as well. I am amazed that just at a week under these VIPARSPECTRA XS1000 LEDs they have almost doubled in size, the FOOP Canna nutrients are so easy to use and the plants just love them! ▶️Tuesday 03.24.21 / These girls just keep stretching, not much room left under the lights feeding FOOP 30 ounces each day. ▶️Wednesday 03.25.21/ Feeding FOOP 30 ounces per day. ▶️Thursday 03.26.21 / Feeding FOOP 30 ounces per day. ▶️Friday 03.27.21 / Feeding FOOP 30 ounces per day. ▶️Saturday 03.28.21 / Feeding FOOP 30 ounces per day. ▶️Sunday 03.29.21 / Feeding FOOP 30 ounces per day. 🔹🔹VIPARSPECTRA XS1000 LED🔹🔹 Amazon US: XS1000 10% off: in10MrJones http://yx-8.cn/0y-6 XS1500 5% off: in15MrJones http://yx-8.cn/0yA XS2000 5% off: in20MrJones http://yx-8.cn/0y2Y XS4000 5% off: in40MrJones http://yx-8.cn/0y5k Amazon Canada XS1000 10% off it10MrJones https://amzn.to/38udUVe XS1500 5% off: it15MrJones https://amzn.to/3esVUyr XS2000 5% off: it20MrJones https://amzn.to/3l5zAfg XS4000 5% off: it40MrJones https://amzn.to/3l7k5Uj

Feed Started With Tap Water Left Overnight For Chlorine/Chlorides To Evaporate. Next Day. Starting EC of our water is 0.10-0.15. I added 1ML of Regenaroot Per Litre. Then Used Canna Terra Flores Until EC measured 0.7. I then used the mighty bloom enhancer by the ml until my EC measured 1.3 Always Give A Little Sprinkle Of Great White Into The Mix Finally i PH'd the mix to 6.2. Made sure the feed was of adequate temp (21c) and continued to feed. 😎

1 month and they are growing.

Vamos familia, actualizamos la segunda semana de floración de estas Granny’s Home de Seedstockers, salieron las 2 de 3, 66% ratio éxito. Aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de floración. La tierra utilizada es al mix top crop, por cambiar. De 2 ejemplares me quede con los 2 para completar el indoor, también cambie el fotoperiodo a 12/12 y aplique una poda de bajos, se ven bien sanas las plantas, tienen un buen color progresan a muy buen ritmo por el momento, las flores están empezando a formarse, hasta aquí todo. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

Week 3 started off well. Gave my plants nutrients for the first time. Lowered the water dose compared to last week and noticed more growth so sticking to less is more until the flower stage. The temperature has been consistent. This week also allowed me to top my plants. And I have seen the new stems coming out the plant. I’ve added a co2 bag hoping to see some difference. I did add a second fan in to just keep the leaves wafting but it reduced the temp so I took it out

Der Geruch ist sehr stark. Endlich das Ende

The final week for both grapefruit by Fast Buds I have given another generous feeding of a compost tea to ensure all the microbes are at their full strength before the flushing begins next week. Both are frosting up nicely and showing a little stress from the light, bleaching the top colas and causing some foxtailing. I’ve increased tent air flow, reduced temps and will leave it at that. Trichomes ate quickly clouding up so I’m giving extra attention to time the chop right, my prediction is that it will be in the next 2 weeks. Thank you as always for taking the time to look through and read the update 🤓🙏👊👍✌️

Girls are coming on good cant complain still need to do some trimming

I fucked up drying. Room RH is 80% plus but I had fans running.. usually, locally, I cant get my dries to go longer than 3 - 5 days.. been drying for 5 days but with the humidity being at 80% - 85% inside the lung room and tent she hasnt even began to dry. Plus, I havent been able to trim her up yet.. just been jiggling the jar around a few times a day and keeping the jar open, inside the tent with an exhaust fan running and another usb fan moving air.. but not blowing on the buds at all.. but around the jar.. so nervous to get mold!!! Drying still.. but day 3 in jar.. She is still way too wet to be jarred. I have just been shaking the jar around like 4 times a day MINIMUM and keep the jar in he tent with air flow.. humidity is still being a butthead.. but easing up a bit.. down to 70%-ish.. when I do seal the jars, it still reads a little over 70%.. I will keep doing this until I get to about 65% or possibly even as high as 68%.. as long as I keep up the burping.. but so far, I just leave the lid open and keep it in the tent with a couple fans running.. no mold, so she should be good.. still gonna keep flipping the buds a few times a day.. this is going to be some DANK! already tried a few nugs.. still alot of chlorophyll, but she is slowly getting to the cure zone!!! Drying day 14.. Finally got the jar down to 65% RH.. that took alot of rolling the jar (to move buds around).. at least 4 - 5 times daily for this entire time I trimmed the buds and put them into the jar waaaay too early.. no mold tho.. and the buds dont tear apart anymore. They should start to crumble (kinda) in the next 2 - 4 weeks.. but going to see how things (including weather) are going to go if I only burp once or twice daily. I kinda want to bring the RH down a bit still.. like 62% 🤔 ah shit, I'm so indecisive lol.. probably leave it at 65% for a couple days and then try to get it down to 63% or 62%.. but once I see 59 or 58%.. it should still be good, but I get worried because I have overdried MANY harvests.. just trying to get things dialed in with drying and curing still.. even 4 years into this stuff! Lol.. but I'm getting a better hang of it.. kinda using my own methods mixed with what I find online.. just hard to judge when the plant is ready by snapping stems.. ive waited till the smallest stem I could find was making the "snap" noise.. but when I did that, the RH in the jars was only at 55% and lower.. the taste and smell were completely gone halfway thru the cure.. ive read that anywhere from 55% to as high as 70% RH is good.. but even at 70% I still have wetness issues.. buds and stems tearing.. still tastes like pure chlorophyll.. but since I've been kinda getting my dries dialed in, so I try to UNDER DRY to get buds to about 70% (that's in jars, not room). I really feel like this doesnt get explained enough in forums and online.. they tend to leave out some very important details.. like what to do when you overdry or underdry your flower.. if its too low, its trash. A 62% boveda and/or integra boost humidity packs can only do so much.. they have helped me, but only if the jars are still above 55% RH.. anything lower has completely removed terps within 2 weeks or so.. but yeah. In 4 years of trial and error (and yeah, forums and other grow diaires), I have found that it is better to UNDERDRY and either burp the jars MULTIPLE times a day (at least 4 - 5) or take them back out and let them dry for another 8 - 12.. maybe 16 or even 24 hours.. depending out how wet the flower still is and the drying area. Anyways.. im stoned and just finger fucking my keyboard here.. but this is very useful info that I have found works for me.. if people dont agree, hey thats cool too.. then these are just notes for myself later 😋 OK, I'm done now.. will keep updating as I go! About 5 days into curing... Got the jar down to 62% - 63% RH so I can stop burping so much.. maybe a short burp twice daily for a week then slow it down to once a day and eventually just stop burping. Been keeping my hand out of the cookie jar for the last... 2 maybe 3 days. I'm going to try and only test a nug once a week to get a feel for how quick its curing and how much better the taste is from the previous week. Did this last grow and each week was a huge difference.. even at week 6! But she was more than ready at week 4!.. not sure how some can cure in 2 weeks unless you get it really dry.. which makes me nervous cuz at 55% RH, I've had horrible results. Trashed the whole remaining harvest.. this is why I like to try and keep the RH a little on the higher side (68% or 65% or so and slowly bring it down to 62% or 63%.. also called the "pre-cure" phase) but I want this harvest to hover around 62% for as long as possible because 62% seems to be the magical sweet spot when you leave them there for the entire 4 weeks.. just my experiences.. Buds aren't very dense, but I'm pretty sure thats due to harvesting a week or 2 too early 😢.. and leaving her in te dark for another 5 days or so before harvesting.. oh the horror she endured toward the end of her life.. she was a fighter tho.. no mold.. in ANY of these super high RH weeks she went thru during the most vulnerable parts! Harvsting, drying and pre-curing.. but not 1 speck of mold 😁 About 10 days into curing.. Yeah I wish I could have let her go another week or 2.. yield was defintely hurt.. quality could be better.. but it will do for now.. live and learn.. I seem to say that every grow 🤣 but still a nice, decent stoney, still pretty decent tasting smoke.. going to just do some small, short burps for the next week or 2. Want the RH to still come down a little.. but if not, meh. The RH (outside and indoors) has been high again.. but luckily I was able to get the RH in the jar down to 62% - 63% RH.. i just burp the jar for a few seconds.. remove the hygrometers and flip the buds.. then put the hygrometers back in, clos up the jar and let it sit till the next day. RH is so high in the room that it raises the RH in the jar a little. But they always go back down to 62% - 63% RH.. good deal. Waiting for a dry day to burp outside for a few minutes. Need to invest in a powerful dehumidifer.. ugh.. Somewhere between 3 and 4 weeks of curing... Yeah definately shows that I harvested early. Still an ok smoke. Could have been fatter.. could have been tastier.. definitely NOT Ethos fault. Kicking myself for not letting her go 1 - 2 more weeks. Wasnt by choice tho.. life happened and she had to be chopped. Just ready for a little warmth and I will begin the next run!!!

Giving some light too dress feedings and making sure she is watered. It’s been hot lately! Guessing another 3 weeks?

Installed some fans to keep the air moving.

I crop/bend down some high branches for level a little bit the canopy, doing this with another net which I will use in the future as support by raising it. Day 46 veg. spray plants with neem oil. the weather is getting fresh so i dim. up my lamp from 100W to 150W. I'm warried about overgrow in flowering stage so i flip in flower.

Hello Diary, Epsilon F1 is the fifth hybrid F1 strain from the Royal Queen Seeds lab that grows on my small farm. This time, all three plants on the farm are Epsilon F1, but the soil mix in which they grow is different. But before I describe the preparation, a few words about the strain itself. EPSILON F1: Epsilon F1 is the fastest of all of our F1 cannabis seeds, and combines genetic traits from some of the most notable cannabis varieties of the last decades, including Blue Dream, Blueberry, Amnesia Lemon Haze, and Black Domina. She boasts delicious aromas, plenty of cannabinoids, and, like all RQS F1 seeds, unrivaled stability, resulting in a uniform crop that consistently produces buds of unwavering quality. Plus, her autoflowering trait and extra-fast flowering time make Epsilon F1 an ideal choice for growers focused on getting to harvest as quickly as possible. Epsilon F1 features a rich aroma that combines hints of fresh herbs and citrus with full-bodied earthy notes and touches of blueberries and lavender. Epsilon F1 is a mid-strength variety, consistently producing solid levels of THC and a terpene profile dominated by myrcene, farnesene, ocimene, and limonene. Not only do these terpenes impact Epsilon F1's delicious aroma, but also its effects, endowing it with a long-lasting, physically relaxing stone that soothes the entire body (predominantly courtesy of myrcene, linalool, and farnesene), mixed with an uplifting, motivational kick (from limonene). SET-UP ON MY LITTLE FARM: Box - Secret Jardin DS120W 120x60x178 Lights - MIGRO 200+ Ventilation - TT Silent-M 100 Filter - Primaklima filter PK 100/125 Fan - Oscillating Koala Fan X 2 Humidifier - Beurer LB 45 Soil - BioBizz Light - Mix Pot - 11L Air pots Seed - Royal Queen Seeds Nutrition - RQS Organic nutrition Let's officially start the diary: 02/08/2023 Planting. I prepared a total of three pots, as usual. And this time I used AirPots, which proved to be the best option. I've been using them since the beginning. I used the soil from BioBizz Light-Mix. Pot #1 - I first put Easy Boost Organic nutrition in the form of pellets into the ground, then I added SeaWeed and Mycorrhiz in the recommended doses and mixed everything well. Pot #2 - I also put in Easy Bosst Organic nutrition, Seaweed and Trichoderma. Also in doses according to instructions. Pot #3 - Along with Easy Boost Organic nutrition, I put Bat Guano and Trichoderma. After I prepared the soil, I soaked all the pots well with water and made small holes in which I placed the seeds. I then placed the pots in the Grow Box where the temperature was around 28 degrees and the humidity was around 55%. 05/08/2023 I sprinkled a little water on the surface of the soil. Not too much. 06/08/2023 All three plants sprouted. 07/08/2023 I watered the plants with a little water. Approximately 0.5 liters per each plant. 10/08/2023 Watering. Each 0.5 liters of water. That's all for this stage, see you soon and thanks for your support.