Recommended
Processing
Likes
15
Share
@ho99o9
Follow
81 day - 3 days until harvest.
Likes
5
Share
@PETEROG
Follow
Hey everyone at week 4 know and wow have these girls grown early this week I applied some LST and all took really well to say it was my first time trying this
Processing
Likes
7
Share
4/18 66 Days Just some progress pictures, no major changes here beyond dialing in the Blumat Maxi carrots. 4/16 64 Days Actual week, 9! If you're wondering where all my other not actually week 9 shit went, I moved it back to week 8. Who am I kidding, no one gives a shit! Everyone now has a Blumat Maxi watering carrot. Now that they are just fattening up I can scale back on them and start focusing a bit more on Phimo, who's just reached ScrOG! Two feedings of their weekly tea, Sunday and Tuesday.
Likes
4
Share
Biotabs program goes on : a big shot of orgatrex (10 mL/L) with bactrex (1 g/L). Plants #2 & #5 still don't have pistils and look bad... I guess they'll go to compost too! From 10 seeds to 4 living plants... not my best run. light is now set to 45 DLI for 18h at 30 cm. 2023/06/26 : still stretching... #2 - 38,5 cm not flowering, looks like it's dying. #3 - 32,5 cm OK #4 - 41,5 cm OK #5 - 26,5 cm not flowering, looks like it's dying #6 - 32,5 cm OK #8 - 31,5 cm OK 2023/06/28 : removed futur popcorn buds... and took a few shots of first trichromes. 😀 #2 - 48,5 cm X #3 - 37,8 cm OK #4 - 46 cm OK #5 - 33,5 cm X #6 - 34,5 cm OK #8 - 32,5 cm OK
Likes
9
Share
Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Likes
57
Share
@ClubRiot
Follow
Start week 9 , Bio Bloom 4 ml/L + Sensi Cal-Mag Xtra 2 ml/L + CarboLoad 2 ml/L + Top Max 4 ml/L + Overdrive 2 ml/L (Ph 6.7).
Likes
28
Share
* ********* Week 11 - June 20 to 26, 2020 - Days 71 to 77 from germination *********** * It is the end of flush week and she went into darkness on Wednesday night, day 75, for two days. Saturday will be harvest day and start and the dry process👍 This week she continued to fill in and she also pushed out more frosty tricombs!! The fade happened this week more and she fed off of more of the nutrients within the plant.....perfect😃......would like a little more even but she was ready based on tricombs. Would like to have seen the lower leaves a little more yellow but its good. I am feeling very strongly that the big part of the pH issues this run was a change in feed water. I have always used bottled RO water for all my grows, except outdoors, but this grow I switched to tap water. Dechlorinated the water with air stone and gave it 24 hours min before using. Wanted to save some money and tired of lugging bottles downstairs a couple of times a week☹️ This is worked out nicely and a lot more convenient. However, the city must be putting some crap in the water that is causing issues in my media and raises the pH after the watering. Out of the tap it is 8.4pH and 275ppm. Since ppm were not too bad in my opinion I moved forward without filtering the water.......oops🤬🤬🤬 Out of options on what is causing the issue, I switched back to RO water late last week........all the girls are happier!!!! F......missed the cause for weeks. Always learning from this plant and my own mistakes to get better every run😉👍 Also wanted to add a little more stress to girl to help push out some increased resin. I drilled a 5/16” hole into the main stem to cause her stress. I did this rather than trying to break a branch and will see it goes this run. Sterilized a new bit in Alcohol and went for it. They went into darkness about a couple of hours later. Excited to see what happens when she comes out to get chopped😃😃 Not really a lot more to add this week as it was mainly looking at the tricombs and her buds. The pH will impact the harvest but she has been fun to grow and very resilient to pest and bug issues as well as grower curve balls. As always.......nice job Sweet Seeds....... SWS56 is very solid and I look forward to running her again one day. Beautiful little girl and makes me smile😃😃😃 Little more detail...... June 20/20 - Day 71 - Rezin and Liquid Weight @ 2ml/L = 285ppm and 4.0pH - 8L given to get a good flush....pH still running around 7.4 - Runoff in pots already were 7.9pH and 685ppm. - after 8L water runoff was 7.4pH and 360ppm. - she is 20” tall and 24” wide. - a number of clear tricombs but more becoming cloudy. June 21/20 - Day 72 - dry out day. - buds are firming up......squeezed a couple🧐 June 22/20 - Day 73 - Rezin @ 1ml/L = 120ppm and pH the water to 2.7!!!!!!!!! - Given 2L watering. - No runoff water and I am good with that as I want the low pH water to stay in the medium. - her frost levels are really coming out now.....was able to lower tent temps to 75 degrees and 51% humidity......its been raining a bit so damn humidity has been high. June 23/20 - Day 74 - 2L plain water feed - 80ppm and pH to 2.4!!!!!! - not excited about these crazy low pH numbers but doing what we can - her tops are getting more pointy now and ripening nicely - leaves continue to fade......she is close - checking tricombs, I think we are done and tomorrow will be her last day so that I can take down on Saturday. June 24/20 - Day 75 - 2L plain water feed - 80ppm and pH to 3.0 - Going into darkness tonight so this was her last bit of moisture. - drilled a hole into the stem.....was going to do a couple of holes but not trying this method before I decided to leave it with one hole. - into darkness tonight So we finish up the week with her in the dark. Next update will be the harvest!! Thanks very much for taking the time to review my diary!! Sorry for running behind often on this run.........everyone has had a busy life the last couple of months in the world and its been no different here...........a huge Kudos to all the Growmie‘s that are able to keep up with their diaries on daily basis on GrowDiaries.......its a commitment😃👍👍 Sweet Seeds girls are very solid genetics with great vigour and resilience.......this strain is no different........great job Sweet Seeds🙏
Likes
Comments
Share
soaked the seed in a small cup of water for two days, then placed it in a damp paper towel for another two days. On 5/19, I planted it in BuildASoil 3.0. I sprayed the soil with spring water and used a plastic cap with holes poked in it to maintain humidity. She broke through the soil on 5/21
Likes
2
Share
1/30/23 The tent is happy and flowering beautifully. This week I started using spinosad to get rid of thrips. The lady bugs have been helping so far but they aren’t killing all of them and they are dying fast. All plants doing well, no big issues to report. I have noticed that the two that I brought in last week were a little shocked by the higher light and had some photo issues and turned light green. But they’re recovering.
Processing
Likes
4
Share
Back plant growing so fast, taller then the other and roots going into the water below already. Small plant up front has been going slower from the start. Slow to poke its head out and look at the light and has been behind ever since.
Likes
69
Share
@Natrona
Follow
Flowers are developing nicely but slowly. Very few feeder leaves are turning yellow yet. I saw some webs between one of her branches and Lemon Cake. So I sprayed them with alcohol and burned some leaves. She and L. Cake have the same dense bushy structur. The buds are tight to the stems which traps humidity and moisture. Inviting pests and fungus.
Likes
38
Share
Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo
Likes
46
Share
@Seedler
Follow
Look what I did to my girl, poor lady. But i'm sure she will bounce back, but with all that leaf shit It's hard to properly tie them down. So i broke off a total of 2 branches (yellow tape) and managed to attach one back to it. Otherwise she took all the stress LIKE A CHAMP - yet. We'll see. To be honest, i was quite lazy with her the last days, it was pretty stressful but look at her, she is basically growing herself! As long as you can cool it, have some sort of system to change water and some, basic nutrients and ph- DWC is the easiest system for me, 100% Look at the roots and i did not fill up the reservoir for like half a week, so a lot of it wsd exposed to air for a longer time still she is growing and growing. Two more weeks and i might have a problem with her in flower, because she will drink so much water the reservoir won't hold a long time haha. Almost forget, i need to add either more fertilizer /ml or give extra calmag. will probably do both kekw Cheers guys! (whoever reads this, this is your sign, get high 👌)
Likes
24
Share
@Leeyum
Follow
I feel like I really identify with this strain. This is only the second one I've grown but I can read her well. If you think you've got a green pheno, try dropping your nitrogen and your temps to trigger her genetics (epigenetics) to influence her phenotype. This girl is almost done. She's right on schedule. Her trichomes are about 90% cloudy. I'll let her hit up to 20% oxidized. She's fattening up nicely. Her bud structure is much different than the first Blackberry, she's much more solid/ dense.
Likes
23
Share
@HanzGrowz
Follow
Just waiting it out now. No added nutrients, just water. Bubba and Black Dog have exceeded their expected flowering time, and both are at 95% cloudy with 5% or so still clear. Chemdawg and The New can take up to 70 days or more so we’ll see if they’re late too. Bubba is a foxtailing machine. It was one weekend in early Flower when heat/humidity got out of hand while I was away for 3 days. She hermied a bit and I’ve had my eye out for bananas ever since (find a few every so often). Taking a risk to keep her in the tent with the others but if I catch them early enough the others should be ok. Interestingly I found a YouTube video of a guy that ran bubba and had the same foxtail development (also the same scent description and look overall). Nothing like the gorgeous fat purple budded girl I had last year but the citrus smell on this lime green bud pheno/version is impressive. Curious to see how the smoke compares. Scent combo from all four plants is amazing!
Likes
4
Share
@GeminiCQC
Follow
Can't wait for each of them to finish out. Giving them hopefully their full amount of water, less with the auto as it was stunted by the 12/12.
Likes
15
Share
This past week seen some fattening of buds. Pretty much all vertical growth has stoped . Now she is focusing on putting weight on. This plant has been a absolute joy to grow to date. I've only encountered a small deff early on and that's it. What dose surprise me is the tricomes she's putting on. I have to bed honest, this is one of the most frosty plants I've grown. Sweet Seeds says it should be mature around the 60 day mark , so far it seems right on track with that mark.