Hi all buddies! First crop from hydro nft growth. Growth went well, I had some management problems in changing nutrients from veg to bloom which delayed the harvest for a week or two. Sensi Seeds' Skunk # 1F is incredibly resistant to mold and insect attacks, very close internodes ensure low height and compact buds. Unfortunately I chose the mother phenotype wrong, I found the lowest as I wanted but I lost the fatness of the buds present in other phenotypes, but the game was worth the same and I am very proud of it! I collected after 94 days of flowering, the last 72h 20kg ice cubes in the tank and total darkness which the last 24h without irrigation. After cutting I hung the whole plants in the tent for 24 / 48h 19 ° C 55% HR. Two days of wet trim to 8 girls and I hung their colas in the tent to continue drying. With a girl i tried dry trim but i will avoid next time. After a week in the tent I cleaned the colas and removed all the sticks, I placed everything in airtight bags in the refrigerator for 5 days 12 ° C 65% HR (daily check). Now dark storage room at a temperature of 18 ° C 65% HR. At the last weighing a few days ago it was more than 500g, from now it does not lose any more weight. Next week I will take pictures of the weigher and the finished harvest🍀🍀🍀 target!!🍀500g dry/cured🔥 Thank you GD community you are precious for everything, criticism, advice, curiosity, thanks 💚🌱✊🏼 Awesome people here on GD🔥🔥🔥

Hola con esta semana ya quedamos al dia con el seguimiento ya que estaba atrasado en el tiempo. Se nota una producción de resina notable en esta genética que nos ha gustado mucho por su olor y estructura de las plantas . hemos creado un video por cada una de las 14 plantas del seguimiento, hay varias muy llamativas que están "pre-seleccionadas" para mantener a futuro, el olor que se llega a sentir es muy florar y dulce, si tienen alguna pregunta no duden en preguntar saludos. Hello with this week we are already up to date with the follow-up since I was late in time. There is a remarkable resin production in this genetics that we liked a lot for its smell and structure of plants. We have created a video for each of the 14 floors of the follow-up, there are several very striking that are "pre-selected" to keep in the future, the smell you get to feel is very flowery and sweet, if you have any questions do not hesitate to Ask greetings.

What an amazing lady! In-house Blue Java has a smaller bud, but that means less wood—- less wood, means bight THC—- based on the taste test, I’m guessing this lady is at least 27%. Growing it was super easy! She was grown in a 5 gallon pot of promix hp and fed almost daily. The resin production was off the chart. Flavor is a woody sandalwood, with a sweet backend. Super delicious and burns real slow. Great genetics, great flavor, easy to grow, and a true stunner! ✌️🏻💚🌿💨

The plants are exploding in growth. Especially the gorilla cookies. I need to start doing a better job of watering my girls. I means its hard having to mix up all these nutrients at one time so I water my plants 2 at a time. I water 2 one day then the other 2 the next day. Im trying this method out cause it makes watering not so intense during dlower.

Started Training Late! Was on summer holiday for a week and only started training now. Above are the plants during training as well as a few hours after training. Autos are definitely more delicate and the two runts are growing slow but yet still showing some progress. Changed my bulbs back to the CMH set to 400w each (2) Also gave them a good amount of water as the FloraCaps aren’t covering the whole pot I felt like it was necessary to wet the entire grow medium well for a change. Some of them were a bit far along for training but I did the best I could. Also the Purple Lemonade and 2 other plants are showing signs of flowering.

Hola a todos Lsa imagenes corresponden al periodo 28/08 al 03/09. Regue con agua 400ml ph 6.3 100ml con top veg. Ph 6.4. También esta semana empece a aplicar algo de LST.

Harvest Update – RUNTZ Both RUNTZ phenos have been harvested, officially bringing this incredible journey to the end. It was a grow full of satisfaction, learning, and beautiful results. I’m truly impressed with the genetics from Zamesia both plants delivered super dense, frosty buds with an absolutely insane sweet and candy-like aroma. The terpene profile on these girls is just mouthwatering and promises a top-tier experience in the vaporizer. Solid, rock-hard nugs on both phenos this strain really lives up to the hype! Special shoutout to Plagron and their product Green Sensation – it worked wonders, especially in the final stages. I’m convinced it helped push the trichome production and aroma to the next level. 🔥 Thank you to everyone following this grow and to the contest organizers for the motivation and great vibes. Stay tuned – and keep growing 🌱

She's getting bigger, the colas are beautiful, but the lower buds are small. Are they going to grow more? How many more weeks to come? Honestly, I'm afraid the yield is going to be small. The way I consume cannabis, 50 grams aren't enough for a month...

so unfortunately I lost some picture of last week and the beginning of this week where I transplant her into a 1.5 gallon pot but expect from that she basically grew untouch ,increase the amount of water but still only every 2days

Bienvenidos cultivadores de marihuana clandestinos, y también, a los que tienen la fortuna de no serlo! 🖐️👨‍🌾... todo por la causa! 137 días de cultivo, 70 días de floración, la gitana andaluza ha cumplido con creces, después de dos días de luz sin descanso y una vez agotada la humedad de la maceta he cortado la planta! Ha sido un cultivo fácil y provechoso, la planta tardó en arrancar, pero después se ha comportado con gran vigor, creciendo con alegría, mucha comida, luz y riegos para dar unos hermosos y densos cogollos que ahora cuelgan boca abajo... en unas semanas completaré mis comentarios sobre la cepa. Ahora su hermana pequeña 3M ▼ La gitanilla, con seis semanas menos de vida!, promete superar a su hermana mayor, con espacio liberado en mi carpa de cultivo, he preparado un escenario de luz digno de una Reina... a jugar! Feliz verano cultivadores!! Hasta la cosecha... SALUDOS A TODOS!! ================================= Info de la cepa GYPSY KUSH: https://en.seedfinder.eu/strain-info/Gypsy_Kush/Kannabia_Seeds/ "una variedad única con un duende flamenco que no se puede aguantar y que solo puede venir del sur..." Kannabia Seeds - Genética: Black Domina x Afghan x Ginger Ale - Hibrido: Sativa 50% Indica 50% - Tiempo de Floración: 58-62 días - Rendimiento: 500 gr/m - THC - Hasta 16% ==============

18cm vertical growth this week. She's not very tall.... Not sure what I've done wrong. 😐 Slowing down now we are entering flowering. She is VERY bushy!!!!!! Very short internode length. I've cut the big fan leaves off the main stem to allow light to penetrate her lower leaves!!! I never usually do this, but she is so bushy they had to go.

Moving along...

This week was amazing guys. I literally watched the buds getting fat day by day. I am still feeding with a similar program and adding Aptus Regulator once per week to boost silica and some other minerals like molybdenum and boron. I'm flowering my plants in a hot environment with CO2 boost. PPFD is high to support these settings and thankfully my the pots aren't getting hot. No fungus gnats or any other pests, no root rot and bad smell. Everything is perfectly neat and buds are exploding. My expectations from this harvest is really high and I'll keep adding CO2 for another week. Some fellow growers asked for CO2 and PPFD measurements. I am sharing these information on this week's pictures. I got my CO2 meter fixed and I tested the CO2 PPM in different places of the canopy. Typical value for this grow tent with this CO2 setup is around 1100-1350. Temperature is fluctuating between 28-31 and the average PPFD on the bud sites is 1100 micro moles. I'm sharing CO2 measurements right under the fan, where you expect it to show the lowest value. Then I'll also share the CO2 PPM value coming out from the air pipe, which is normally attached to the grill of the fan. Direct output is now around 5500PPM and in the first two days, the meter shows 10000PPM which is the max value that it can reads. This bucket yeast CO2 reactor lasts for four days and I'm refreshing the mixture twice a week. This is huge CO2 with a fairly low cost compared to propane burners or CO2 tubes. Edit: I refreshed the CO2 bucket today and got you guys a video of the direct output. The system is outputting more than 10000PPM of CO2 and the meter can't measure it for the first two days. This CO2 method is a killer one for tent grows. Very low cost for very high CO2 concentrations. Hope these information helps. Happy growing 💪

Muy buenas noches muchach@s.... Bueno, comento!, segunda semana de crecimiento de las red cookie gelato! 🌱 Cómo ven hoy fue día de selección de las q para mi, novato, fueron las mejores para trasplantar a estas macetas q ya son las definitivas, las regué con ½lts de agua c/u, prendí el otro led y ahora hay una fiesta ahi dentro q no saben, terrible!!.. 😎🕺🏻💡 Bueno, ya las ven, están re lindas... Así q ya no las molesto más... Ahí están trankilamente... La semana que viene les cuento más... Buen finde y buenos humos para tod@s... 🔥 💨💨💨 🇪🇸🤝🏻🇦🇷

Flipping to flower Topped a week ago with 50/50 all purpose and power bloom Watered with microbial tea that was brewed for 18 hours.

Here we are at the end of my plant's wonderful eleventh week of flowering, another week full of exciting developments and new discoveries. The constant and unstoppable growth of the plant has come to an end, showing a beauty and vitality that are a true spectacle for the eyes. 😎 The abundant layer of resin that has formed is a clear sign of the health and well-being of the plant, once again confirming the benefits of the premium nutrients used throughout the entire growth cycle. TrollMaster's "TENT-X" environmental control system continues to prove its worth, precisely maintaining optimal temperature and humidity levels to promote vigorous plant growth. The combination of advanced and precision technologies ensures that plants can thrive in a controlled and conducive environment😎 I am thrilled to share with you the latest video showing the temperature, humidity and VPD trends of this last week of flowering, providing further demonstration of the extraordinary performance of the TrollMaster control system and its synergy with the other elements of the grow room. With each week that passes, the anticipation for the new discoveries and challenges that await us continues to grow. With the constant support of Plagron nutrients, trust in the TrollMaster control system and the excellence of MEDIC GROW LED lighting, I am sure that I am always ready to face any challenge! Thank you again for being by my side in this extraordinary adventure, dedicated to exploring the wonders of plant cultivation. Together we continue to look to the future with confidence and enthusiastically anticipate the successes that each new week holds for us. 💪👽🌱✨ REVIEW TENT-X: I was pleasantly surprised by the effectiveness and functionality of the TROL MASTER! This device is simply amazing, as it has allowed me to monitor the environments I use it in accurately and efficiently. One of the most impressive features of this device is its ability to operate LED lights easily and intuitively. Thanks to its user-friendly interface, I could easily customize the lighting of my rooms according to my tastes and different situations. I particularly appreciated the possibility of programming the sunrise/sunset simulation, thus creating a more natural situation. But that's not all: the device goes further and manages to keep me constantly informed about the humidity and temperature of the surrounding environment. This feature has proven to be very useful, especially in times when I am not present. I was able to set humidity limits, so that the device would immediately alert me if the levels exceeded the desired threshold. This allowed me to intervene promptly and avoid excessive oscillations. The accuracy of the temperature measurements was another welcome surprise. The device is equipped with a high precision sensor that allows me to constantly monitor the temperature of the rooms. Here too I was able to set temperature limits, allowing me to be notified immediately if they were exceeded. Overall, I was really satisfied. The TENT-X exceeded all my expectations. Its ease of use, precision of measurements and possibility of customization make it an indispensable tool for those seeking to monitor and optimize environmental conditions.

Week 24 (25-11 to 1-12) 25-11 Temps: 19.1 to 26.3 degrees Humidity: 44% to 62% Watering: Both 500 ml. 26-11 Temps: 18.6 to 25.9 degrees Humidity: 44% to 61% Watering #1: 500 ml. #2: 600 ml. Dry Weight #1 3.8 kg. #2 3.7 kg. 27-11 Temps: 18.5 to 26.9 degrees Humidity: 45% to 60% 28-11 Temps: 18.2 to 24 degrees Humidity: 45% to 61% Watering #1: 500 ml. #2: 600 ml. Dry Weight #1 3.6 kg. #2 3.5 kg. 29-11 Temps: 17.4 to 21.8 degrees Humidity: 52% to 61% Today is the first day of full darkness. Dry Weight: Both 3.9 kg 30-11 Today i harvested both plants, removed some of the big fan leaves, and hang to dry. 1-12 Temps: 16.7 to 17.7 degrees Humidity: 60% to 64%

Aquí les dejo la primera semanita de esta maravillosa Purple Kush Feminizada del banco de Kannabiaseeds. Estoy usando de sustrato Plagron lightmix, esperemos que de muy buenos resultados😍

Así terminaron la cuarta semana! 🙏 Estas 🦍🍌 quieren la flora pero ya! Se ven maravillosas, hambrientas a mas no poder… Se van a flora con 30 días! Gorilla Banana - BSF Seeds Saludos 🖤🙏💚