Start of week 6 of flowering. Plant 2, survived last week's heat stress and seems to be recovering well. With the new exhaust fan - vivosun 4 inch, 195cfm - my temps have not exceeded 35°c at any time I've spot checked. Hopefully no more issues or setbacks for the rest of this grow.

Started the week with a big mid flower feed with NFTG. Also tried to defoliate some leaves blocking some light. She is growing tall for sure. 3 ft tall. Her buds are forming real well ! love this plant. Day 57- NFTG mid flower feed/ Mammoth P/Recharge @ 6.5 Ph Day 58-59 No watering Day 60- Recharge/Cal-Mag/Mammoth P/ Bloom Khaos Feed @6.5ph Day 61- No water

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Ok now it looks to go good no signs of Amy strange things so far 👌🏾👌🏾

Hallo zusammen 🤙. Das war es für sie melde mich in 3 Wochen mit einer Bewertung. Bis dann

Nothing special.. just giving it a lil spray at the top of the soil every time it goes dry

She looks as healthy as her sister,she's happy,no issues at all,and starting to show the first pistils on August 24th.let's see how this wonderful strain performs. 😊💚🌱

Start to add bigbud today with tapwater

Day 42 flowering: What a start to this update with the #3 Mango cream being ready for harvest NOW!!!. She has been maturing very quickly during the last few weeks and I have been concerned that she was somehow going towards a toxicity issue. Her buds began darkening really early in flower and I thought it looked very different to the others. As the last week has passed I have been looking at her trichrones with the microscope as they oustils had all gone majority brown too. They had mostly clouded and a couple of odd amber spheres were visible too. as the week went on I saw more begin to amber so took her out a day ago too have a dark period before trimmed for drying . She is the first I have ever had this quick in decades of growing !. The video shows her colours off well and her maturity to harvest too. @exoticseeds have a winner here. lol she smells amazing too with a really nice icky sticky feel . I will update her progress once trimmed. #1 is the smaller of the 3 remaining ladies now ansneven with the #4 beingna week behind her she is still the smallest in height. Her buds are nice and chunky and just as we hit the budswell period too , so shebshould finish with some nice sized colas. #2 Mango is a beast of a plant and by far the largest. Her main is a beast of a cola already with the side branching really picking up some size now too. A brilliant example of the strain I think. Her main is really tacky to touch and the nice smell it leaves all over my fingers is mouth-watering now. She should yield very well. #4Mango at day 35 looks very like the #3 plant for her bud appearance. slightly different pheno i think. More like a wedding cake strain but still very nice and colourful. She has been using pellets in the soil mix and just waterings but they are not good in my opinion and I have had to add megacrop to keepnher growing well now I waited as long as I dare to see if the pellets helped in flower but even using the second part of the feed has not helped. The megacrop has already begun to colour them back up to a more healthy green so i am hoping I can keep her happy until harvest now. She is pushing out a very nice fruity smell now too. I am looking forward to trying the photoperiod strains I have from exotic now and will be germinating Herz Og and Quick sherbet in a couple of weeks time for the summer run. Top genetics from a great breeder . Thank you Exotic. ###UPDATE###UPDATE###UPDATE### The Mango cream #3 has been in the dark for the past 48hrs and has now been trimmed and is hanging to dry. She will be dried low and slow now for approx 10-14 days at around 15-17°C in a large cardboard box with a steady air exchange. She has a surprising size and weight to her for such a short time from seed and is as finished as any plant i have harvested before . What an amazing little lady she has been to grow She looked a little stunted initially and soon filled the pot she was in. 20L was way too small for these genetics to flourish and at least a 30L would be my advice. Happy days , let's see what she yields dried while we wait for her sisters to join her. Be well Growmies

One of the girls had to be chopped as she was ready and extremely deficient. The others are maturing nicely and really starting to swell at the bud sites. The smells are a bit better but apart from the one pheno nothing too crazy. Should be easy to chop at some point next week.

Today I don't give a lot of nutrients, but I focus on the use of acid and alkali. And this is the day I clear the big leaves again. Hope your enjoy.🙏💚🥦

2/7: Did a thorough feeding today, and also foliar fed with Microlife Maximum Blooms. Added humic acid. I spotted a couple of nanners on the main cola of the older/paler one and they had already popped... 😒 Might be some interesting hybrid beans in the garden, but hopefully the recent foliar feedings killed off any stray pollen before much damage was done to the crop. 2/12: Fed today..no time for anything else..

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

📆 Semana 4 - Permanent Jealousy XL Auto Después de un mes con mal tiempo (lluvia, nubes y poca luz), la planta ha tenido un desarrollo lento, pero se mantiene sana. Actualmente tiene 3 nudos bien formados. A pesar de las condiciones, no ha mostrado signos de estrés severo ni deficiencias. A partir de ahora, con la mejora del clima, espero que empiece a acelerar el crecimiento. Seguimos creciendo fuerte 💪!

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Day 29 since the time change to 12 / 12h. hey everyone :-) short update. The mini experiment is starting to develop your buds well. Due to its size, it was poured only twice this week with 1 l each. As before, the phenotype is already starting to crumple slightly :-). Have fun and stay healthy 🙏🏻 You can buy this Strain at : https://www.zamnesia.com/de/5165-zamnesia-seeds-kalini-asia-feminisiert.html Type: Kalini Asia ☝️🏼 Genetics: Black Domina x Purple Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

This week is special, i got the New System from ac infinity. I need to get comfort with everything, but its realy high Qualität. For now we can get the best vpd for the lady, so i hope the best for the flower.

Week is going good she is overall coming around tied down more branches opened up the canopy will be using Gaia nutes to finish this one out haven’t seen any pistols yet tho

The week was crazy, a lot of height growth that is bad, because i don’t have it, but overall looks good and let’s see what will come, hard defoliation has been done, hope last one ;p