Vote Now 🏆 for the Grow Awards 2025!
Likes
1
Share
@mauigrown
Follow
In week 5 of flower and decided to start documenting my indoor 2x4 grow setup. We currently just finished day 3 of week 5. I have my lights running from 9:15PM - 8:45AM. I am not sure how I messed up on my timer but that's been my schedule since flipping to flower. I have an A/C in my bedroom that I duct into the tent. I have my A/C set at 62F and the tent gets to around 71-75F with the lights on. Lights off it ranges from 68-70F. I have a small dehumidifier in the tent that needs to be replaced because it is not efficient. I have an intake fan running at full blast at all times and my exhaust fan is automated to turn on based on temp and humidity. Week 5 has brought on a lot of strong dank smells and a whole lot of weight to the buds. They are really starting to thicken up! I have not had too many issues with this grow so far and luckily, the tent in clean and bug-free. Lots of resin and terpene production going on and you can smell and see it increase daily! I am following General Hydroponics Flora Series 6-Part grow chart. I am currently following the medium strength chart. I'll measure everything out exactly as the chart suggest then dilute my mix until I get to my desired PPM of 1000-1200. I PH around 6.2-5.8 and then add my microbes. I changed up my watering technique mid grow due to an issue I dealt with and now watering 2x a day. Lights on and right before lights off. If my lights didn't run overnight, I would like to add in a 3rd watering in the middle of my light cycle but 2 a day is working for now. I water until there is a good amount of runoff. I measure the PPM of my runoff compared to the PPM of my inflow mix and will keep watering until the runoff is 300PPM or less over my input. So if my mix is 1000 PPM and my runoff is 1600PPM, I will go back and water or as I like to think about it, rinse off the coco until my runoff PPM is at 1300-1000. It is a little tedious but it's a habit I formed and it does not take much longer to ensure your PPMs in the root zone is perfectly where I want it. I defoliated right before flipping to flower. Then defoliated 2 weeks later, and then a minor defoliation on week 4 of big fan leaves. I most likely won't be taking off any more leaves for the rest of the grow unless they are really blocking the light. I am planning on harvesting in week 8 or 9, depending on when the plant is showing it is ready. For General Hydroponics line, it has been the same nutrient strength/mix from week 3-5. Next week, Week 6, we start lowering the strength and adjust the amounts as we get into the later stages of flower and eventually will be flushing. For my flush, I will be using GH Florakleen, GH ripen, Mammoth P, and Bio-Fizz. Excited to see how these girls turn out! I'll be adding my outdoor grow as well as a new veg tent that I setup yesterday in my room. Stay tuned!
Likes
1
Share
@mauigrown
Follow
In week 5 of flower and decided to start documenting my indoor 2x4 grow setup. We currently just finished day 3 of week 5. I have my lights running from 9:15PM - 8:45AM. I am not sure how I messed up on my timer but that's been my schedule since flipping to flower. I have an A/C in my bedroom that I duct into the tent. I have my A/C set at 62F and the tent gets to around 71-75F with the lights on. Lights off it ranges from 68-70F. I have a small dehumidifier in the tent that needs to be replaced because it is not efficient. I have an intake fan running at full blast at all times and my exhaust fan is automated to turn on based on temp and humidity. Week 5 has brought on a lot of strong dank smells and a whole lot of weight to the buds. They are really starting to thicken up! I have not had too many issues with this grow so far and luckily, the tent in clean and bug-free. Lots of resin and terpene production going on and you can smell and see it increase daily! I am following General Hydroponics Flora Series 6-Part grow chart. I am currently following the medium strength chart. I'll measure everything out exactly as the chart suggest then dilute my mix until I get to my desired PPM of 1000-1200. I PH around 6.2-5.8 and then add my microbes. I changed up my watering technique mid grow due to an issue I dealt with and now watering 2x a day. Lights on and right before lights off. If my lights didn't run overnight, I would like to add in a 3rd watering in the middle of my light cycle but 2 a day is working for now. I water until there is a good amount of runoff. I measure the PPM of my runoff compared to the PPM of my inflow mix and will keep watering until the runoff is 300PPM or less over my input. So if my mix is 1000 PPM and my runoff is 1600PPM, I will go back and water or as I like to think about it, rinse off the coco until my runoff PPM is at 1300-1000. It is a little tedious but it's a habit I formed and it does not take much longer to ensure your PPMs in the root zone is perfectly where I want it. I defoliated right before flipping to flower. Then defoliated 2 weeks later, and then a minor defoliation on week 4 of big fan leaves. I most likely won't be taking off any more leaves for the rest of the grow unless they are really blocking the light. I am planning on harvesting in week 8 or 9, depending on when the plant is showing it is ready. For General Hydroponics line, it has been the same nutrient strength/mix from week 3-5. Next week, Week 6, we start lowering the strength and adjust the amounts as we get into the later stages of flower and eventually will be flushing. For my flush, I will be using GH Florakleen, GH ripen, Mammoth P, and Bio-Fizz. Excited to see how these girls turn out! I'll be adding my outdoor grow as well as a new veg tent that I setup yesterday in my room. Stay tuned!
Likes
91
Share
@WeedDude
Follow
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ DAY 147- DAY 98 Flowering ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Welcome to a new week :D I'm starting to reduce the nutes. I am thinking about 1-2 week till harvest. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ DAY 149- DAY 100 Flowering ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Likes
34
Share
Welcome to my Kosher Cake Diary. Be sure to drop a like so I can visit your diaries. Wk 4 VD23 25/5 Doing really well. Loving life and she a very nice plant to grow. Takes to LST and any light training like a champ. Very nice lady to have in anyone's garden. A beginners delight. Looks like she's coming into preflower gonna be a small harvest. 27/5/22 Made a new batch for feeds for this week. Brought it down to 810. Added Atlas, goddesslada, fire yields to jungle juice trio. Will give another Epson Salt feed this week also. Had to add PH + as it was only 4.3. Brought up to 6.2 keeping EC at 1.6/800ppm. 28/5/22 I know this is the 2nd round of Epsom Salt. But this one marks the start of a new weekly process I'll be adding. I usually do 2 feeds 2 water feeds mix em up over 8 days. So, for one of them water feeds will now be Epsom Salt. Every 2 weeks Calmag will be added with it instead, or just calmag by itself instead of Epsom. I've heard ppl swear by it and then some not. So, I'll make up my own mind. I'm overal happy with how I've done this grow. I've sat back much more and been very hands off. I think I'm going to scale it back down a lil.. too big for my needs. This 1 will be my shorty and we gonna c how dense we can get the buds with high co2 with negative pressure environment. Ye, I know the exhaust will take away from the co2 but the ambient co2 in the room is fairly high. I have 2 co2 exhale bags going and got my friends co2 meter wasn't home but my partner said he dropped by but couldn't leave it as he was passing through and took a measurement for me. 825 in the tent and 8-850 in the sealed grow room. 29/5/22 Yup, I was right days ago. She has more or less started flowering. 1st 1 to leave the veg stage. Thankfully I'm using jungle juice trio, so no need to flush grow nute, I'm going to even the nutrients ratios out and after a week I'll do 1 part grow to 3 parts bloom and fill micro. With a few Terra Power specials. 31/5/22 Coming to the last week in the 4th. She started flowering around D25 was showing signs she was coming into preflower have a video up to show what to look for to know when to flip to bloom nutrients. If I was running on GROW+BLOOM separate nutrients I'd of flushed with water for 2-3 days before you flip to bloom base nutrients but as these nutrients (jungle juice trio), it's just a case of changing the nutrients ratio. For the 1st wk of pre flower it's recommend you use half and half then 1rd grow to 3 parts bloom so that's 1ml grow to 3ml bloom (these are just ratios not the actual mls that will be used). I have started flushing my other grows that are showing signs of coming into pre flower. I'm still giving the grow&bloom base nutrient La Sirena as this is given through grow and bloom so no need to flush that out. Shes short. The way I want her. I had this 1 set at 30-35cm after wk 2 up until flower and I'll move her close to the light at 20cm as I have high co2. I know you need high PPFD to get the most out of it but the benefits are the same, (been able to withstand a higher temp/ higher RH/ higher PPFD) SO, hoping to get a short nice dense buds from top of canopy right down to the middle, everything below that has been stripped so dense buds throughout is the goal here not so much mass but quality and eye appeal. At 20cm the ppfd will be 11-1200. Not perfect I know but it'll give some sort of better bud quality. The rest are grown nice and big. All plants are 45-59cm just before coming into pre flower there's a few more that are still young so height is still yet to be seen. But the aim of the game is nice dense kosher cake bud. Thanks for reading gottagrowsometime
Likes
34
Share
@Kynareth
Follow
dia 67 , semana 10 - Esta semana el espigamiento ya se ha detenido y empieza a aumentar la cantidad de resina, se puede ver en las hojas ese tono blanquecino semitransparente, una muy buena señal
Likes
5
Share
Thiis time I wanted to make all same strain kind of grow. Put the seeds directly in the jiffy pellets in the pot to save some extra work. I always used Aptus nutrients but this time I switched to Biobizz since Aptus isn't imported anymore to my country. So we will see how Biobizz works.