The papaya pancakes tester is looking good! I topped three days ago and have been watering regularly with a single feed since last update. I added in some canopy side lighting that has some red spectrum diodes as I am not happy that the light in this tent is so far into the blue spectrum. The girls a trucking along nicely and I'll flip to flower by next update!

Started from seed this lady's have 17 days under half load 4 X 50W Cree CXB3590 CRI 80 3000K custom build led. 7days in rockwool cube under a dome , 10 days in 750ml pot. Freshly transplanted into to final pot. They have received 250ml of fertilizer solution and transplation soil was moisted with 6.5PH water. Led now running on full load. This project have some custom/extra gadget, a prototype growing controler. Hardware Specs: Raspberry PI 4 4Go Ram + SSD 120Go Phat sparkfun qwiic i2c hub + i2c sensor for : temperature,humidity, co2, tvoc, air pressure and distance measurement(plant height) Linked with one custom wifi power bar for schedule and countdown. One sonoff pw r2 for energy monitoring. Both using ESP8266 chip and running on Tasmota alternative firmware. Linked to the controler using normal wifi AP. From Wall|----Sonoff-----Powerbar---: Led, Extraction Fan, Mouvement Fan, and the Rpi4 Software: Exploitation System: Custom Linux Buster Lite OpenHab : Open source domotic software for visualition and automation. Mosquito MQTT +TLS server : Used to publish and receive message/data from sensor etc. InfluxDB : DataBase for data retention Chronograph: Visualisation and transformation panel to analyse our data. Custom python code for running the sensor and publishing result into mqtt channel Chronograph have monitoring panel for now The growroom Sensor AkA spaceship The system sensor and hardware/computer monitoring : Memory, Disk space, CPU load and temperature. In/Out etc. Network etc The database: request per db ,memory heap, disk usage, http request etc. Working : Co2, humidty,temperature, Tvoc, Current,Voltage, Power, Daily/yesterday/Total energy consumption on kWh and $ Planned in version 1.0 : Mesuring plants height using ultrsonic sensor. Adding remote On/Off function on sensor using openhab. Adding power schedule in openhab. Adding basic automatic watering/dosing system, Planned In version 2: Adding relay and dimmer on the custom led to control/dim each cob. Adding custom small emerson effect led based on 3W led. Adding , automatic, PH, PPM and temperature monitoring for water/fertilizer. Adding PAR sensor for light monitoring. Adding soil moisture and PH sensor. ============================================ 2020-05-07 ============================================ Added security cam for streaming with rtsp, working on http conversion for addition in openhab Added snapshot. CO2 sensor down, some resoldering needed. =============================== ================================= 2020-05-08 =============================== Good: Updating fertilizer quantity from 250ml/day to 500ml. Watering planned for the end of the day. 2 days ago i've pinched the head of each plant Internode are booming. Started LST training s to help the lower internode. Bad: Noted some physiological/Nonparasitic leaf Roll on one plant ; humidify level is too low; Humidificator filter is broken, need to be replaced. Monitoring #4 for couples of days.

Desde el momento uno fue fácil de cultivar, no tuve ningún problema en todo su desarrolló. Como planta supero todas mis expectativas, se encuentran densos y muy pegajosos los cocos. En algunos hay partes de color violeta/lila. Y por ultimo recomiendo mucho cultivar esta genética por lo sencillo que fue cultivarla y sus resultados finales, todo de diez.

Growace.com aircube only discount code NINJABUDS ELUFAH / Amazon discount NINJABUDS The plants are very close to being large enough to start useing the watering system to water them Straw lectric lemonade is starting to get used to the stronger light. It’s starting to grow quickly. Looks good for now not a lot to update

the girl got a lot of heat sun and rain this week :D everything looks good she is already starting to bloom :).

Germinamos según el método del vaso de agua, al que le hemos añadido unas gotas de agua oxigenada

Start of Week 3. Been an awesome first 2 weeks.😎 I have learned more than I thought possible. I want to thank everyone who has helped me.🙏 Gonna start LST later in the week. 💪 Will be updating throughout the week. Happy Growing! 🤙💚💪🌱😎🌱💪💚🤙

Week 6 has brought about the slowing of vertical growth and the flowers starting to put on some bulk. Each time I have run this cut the top leaves will start to come in lighter than the fan leaves below. At week 6, so far they are maintaining a lime green color with some discoloration. This is not a cause for concern. Flower formation is on track and everything else looks healthy. I basically have to ride with whatever happens because I use the BeanStalk line of products for fertilization. They are a single application, controlled release formula that feed the plant over the course of approximately 90 days. This means that I never have to mix nutes. Water only and I set it and forget it. I mix in a known quantity of the product at transplant and that’s it. I highly recommend this product to anyone who is interested in simplifying their grow. The upfront cost is a little steep, but I purchased 3 pound bags of all 4 products in February 2021 and still have a ton of it left. Last time I grew this cut, I observed many of the ‘sugar leaves’ turning yellow and dying prior to harvest. That plant was grown in a 5 gallon pot, with a much longer veg time, much more vegetative mass, and was much closer to my lights. I am hoping to get different results in a smaller pot with shorter veg time and less leaf growth. When I harvested that plant, I noticed that on most flowers this was not a big issue, but over time I have found that when sugar leaves die on the plant, this is the most likely avenue for mold to develop in my room.

Plant looking strong and healthy, light distance at 18 inches, this seems okay no signs of light stress, happy days :D hoping for a quick recovery from the topping

Thanks to Zamnesia Seeds for this great opportunity! 🙏🙏🙏 White Widow is my favourite strain ever, since I tasted it for the first time 😍 So i'm back, with this fantastic experience 🙏 let me know your impressions, growmies! Best, green life! Omisan

Day 43 : Watering with co2 tab / 5L. Also added food again because i think they need it. Increased ppm to 850. Maybe the next one will be pure water. Ventilation works all the time when lights are on. Temp and humi are stable and this is good for the girls. 4 cm in 3 days and stretch almost finished, time for production. Patience is the key always. Also removed some burned leaves from all ladies. Her smell is lemony and look forward as fuck for this one. Edit (Day 47) : Watering with co2 tab every 5L. I watered with juices again at 850ppm because i felt that they need it. Only DsD drank pure water because of burns. Blue Cheese smelling very lemony and citrus. She will be very stinky. Started to fatten. Grow 4cm in 4 days. She likes juices also.

What the hell happened this week? Last week she was 70cm, this week 120cm!!!!!!!! She must be very happy!!! 😍 Incredible growth. I hope she slows down soon or I'm going to have to bend her main cola over 😐

MIMOSA ZKITTLEZ FF / GANJA FARMER WEEK #13 OVERALL Week #3 FLOWER This week she's done stretching just in time she's almost touching the light. She's starting to fill in and get some weight to her buds additionally you can see the trichomes starting to form on her buds! She's absolutely starting to smell good also! Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! THANK YOU GANJA FARMER!! BUDTRAINER.COM BUD CLIPS MIMOSA ZKITTLEZ FF / GANJA FARMER

Hello everyone, we are therefore at 67 days of flowering, the booster is having an effect, the buds have grown well, the plants will now remain in water only. Regarding the trichomes, it begins to be mostly opaque. I hope that the senescence will now advance. the lamp went from 470w to 360w. I'll tell you next week. bye

These 2 are growing likes beasts. They will both be going outside in the next 2 weeks or so. Just waiting on overnight temps to stay in the double digits and we are GTG.

Week 6 Update – Stretch Madness! 🌿 Things are going really well—maybe a little too well! 😅 The stretch has been insane, with the plants reaching 80cm in height and still growing. Honestly, they can stop anytime now! I’m currently watering 3.5L every 36 hours to keep up with their needs. BioBizz#1 – BT15 Everything looks good so far, but I checked the runoff and noticed a pH of 7.5. Not exactly ideal, considering my feed water has a pH of 6.7 without adjustments. Something to keep an eye on. AN#4 – BT15 I’ve reached 100% of the feeding schedule with an EC of 2.5, and she’s handling it like a champ. Since bumping up the nutrients, she’s taken off and even overtaken BioBizz#1 in growth. AN#3 – BT11 She’s been getting an EC of 2.1 for the past few days and seems to love it. At this rate, she’s going to outgrow my tent soon! 🙂

I cleaned out the reservoir and switched from Veg to Bloom nutrients on day 36. My 35% Hydrogen Peroxide arrived, and that definitely makes a difference with keeping the reservoir cleaner longer, although I am still cleaning it maybe every 10 days or so, just a quick 2 min scrub with bleach/water, and then i run it through the pump and lines as well, then run plain water through it before hooking it all back up. The ONLY water I have used from my well this grow has been to clean my reservoir, everything else has come from my dehumidifer. I am now using some Cal Mag, Maxi Bloom, AND some Liquid Kool Bloom. I am running an EC of about 1450. My runoff from Coco is coming in around 1490 EC. Not seeing any issues with the ladies, just worried I may have waited a little too long to switch from Veg to Bloom Nutes, although I was adding about 25% Bloom for the past week or so. I guess we will see here soon if she gets some bigger flowers. Thanks for checking me out, and Blaze On!

Awesome Week💚 Following some great discussions with more experienced growers, I really think we got things back on track!🚆 🙏 To Those Growmies! I really raised the ppm this week we topped out around 630 PPM This was in an attempt to balance out some nutrition issues. I think the ladies have responded very well. 😃🌱💪 Raised the light up to 24in as well a few days later after seeing positive changes due to feeding regiment. Started preflowering, showing pistols on all plants. Counting down these last 7-8 weeks when the ladies beauty comes out 🤩 Will update throughout the week with photos and videos. Happy Growing! 🤙💚💪🌱😎🌱💪💚🤙