Likes
Comments
Share
Went into this week just using mute from fox farm ocean then began nutrients due to deficiencies, getting in under control but overall doing well also started 3 new plants going to start a diary for them soon
Likes
14
Share
Have lost momentum with this little one, not gonna lie! Seeing her next to the same cultivar doing way better (no surprise) is a bit of a bummer haha! That being said, her bud looks more compact already, and more colourful. The proof is in the pudding anyway, and I look forward to sampling 😌
Likes
7
Share
Processing
Likes
41
Share
Welcome to Sweet Seeds Cup 🏆 Hey everyone :-) This week she has grown very nicely 😊. It increases very quickly and beautifully. Today she got the last time the organic vega fertilizer, since the lighting was switched to 12/12 about 6-8 days ago and started to produce her flowers. The next dose is the first dose of Canna Bio Bloom ☺️. Tomorrow I will take 2 - 3 shoots down from the bottom, that the full production goes to the thick buds above and will not be wasted on small popcorn buds at the bottom 😍🤗. Next weekend the next update follows as usual 👍. I wish you all a good start into the new week 👌, stay healthy 🙏🏻 and let it grow 😎🌱. Sweet Seeds Cup 🏆 Type: San Fernando Lemon Kush ☝️🏼 Genetics: OG Kush x Kosher Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 220 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧
Likes
20
Share
Hi all , this journey was wonderful. From the first month I knew this was going to be a wonderful experience and I was right. with the flower was not lead time no problem. I would recommend this model to anyone who likes fragrant flowers. and especially giant flowers. thank you for watching. and many thanks belong mainly to the bank.
Likes
8
Share
Week six! Butterfly is still chugging along - not mus to report really, she's stopped stretching and is piling on the pistils. Day 36 - Photographed and fertigated 5l each. Day 38 - Photographed. I do feel it was my fault stunting this girl, but she will stay the size she is now. Special thanks to St Aubins Genetics for providing the seeds for this grow. Check them out at www.staubingenetics.com
Likes
2
Share
@Chucky324
Follow
Hello This is the end of week 8 and the beginning of week 9 of veg. Everyone is doing good here. They have overcome their repotting experience and are growing a bit now. Getting those top branches spread out and under that first rung of the cage. I'll push the smaller branches up through the middle of the plant while spreading out the upper branches. They are getting about 3/4 strength nutrient now. Still watering it down a bit. The seed description said these seeds produce big plants, so I'm doing what I can to keep the size down to manageable. OK. Grow Straight. Chuck.
Processing
Likes
10
Share
@TrimQueen
Follow
So, guys.. This is her first month blooming. 4 complete weeks has passed. Here we are for 2 more. Gave Her a super powerful egg shell fert (all powdered - Phosforium Whelthy.) 07/10/20 - We are in the middle of week 5. Thats the way they look like. For me a good number of buds and they are as dense as I thought they would be by this time. I think everything is under control despite some foxtails cuz the heat. Loving the experience.
Likes
40
Share
@xbrico
Follow
Day 15, having a right week of it!!! Thought I was on top of the chlorosis (Thinking Ca/Mg issue) and then I start getting issues that make the plants look like they're getting N Toxicity!!! Now, in all fairness, by fixing the Ca/Mg issue, I may have created an N issue - My CalMag does appear to have N in it - @Shogun any helpful ideas here for me please??? :) What getting me is plants are drinking (Not massive amounts, but they are drinking), EC is staying stable and have standard pH drift of about 0.1/day towards neutral, this should be bang on. Roots are good as they're popping through bottom of the root pouch/air pruner pots (These are 12L each so a number of roots are over 6inches long this would mean) and growing into the run off water (I may mod my Wilma and make it a psuedo bubbler too but then this may cause all sorts of issues with my expected water volumes, etc.!!!). Wondering if anyone on here has had issues with either wind burn (From a 7" oscillating fan) or seen low humidity issues in veg that could maybe help? I am going to grab a humidifier for the tent (Should be here Wednesday) to see if that helps (Liberally spraying the place with pH adjusted water, added open water sources to the tent, etc.). Also, with the roots popping through, may grab some Sensizym to clean up dead root material & fulvic to ensure no salt build up round the roots. As I am stumped by what I am seeing (Things seem to contradict each other), I ran 2L of pH adjusted water through each plant on Sunday 30th and held of feeding to ensure salt build-up wasn't happening in the clay, round the roots. This has topped the tank back off to around 50L, brought my CF down to 10 (1ec) and I dropped feeds to 3 per day (15mins after lights on for 15mins, 1 in the middle of the cycle and 1x15 near lights off). The fact there was no EC upping with such a small amount of water, again makes me think the "Nute Burn" isn't caused by the feeding and possibly by humidity (or lack there off - it can get down to 35% in there). I know it goes against all the SOP's, but in general, the air coming out of my tent is cool; It does go into the main room where the tent is, but is a large cabin and has the door open most of the day with kids running in and out of the other room (I have a security gate to keep them out!!! :P Also, the airflow crosses my ballast, keeping it cold to the touch); until the humidifier arrives, can i recirc the air back into the tent to up the humidity? I have a dehumidifier in the room (On but set to 90) to check the humidity in the main room and it is creeping up (Was at 63% there when I was re-doing LST while tent was at 44%). My lights on period is 4pm to 10am but don't want to turn the fan off as the tent is beside a SW facing wall so is getting heat for a couple of hours before Sundown (around 9pm now). Or, would it do much damage to change to 6pm to noon for lights on? Don't want more of a shock to their system as they've settled into 18/6 from a 24hr under CFL at seedling. Again, anyone who sees this and may be able to help, please do! Day 19 and 21 added
Likes
33
Share
Gracias al equipo de Sweet Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Sweet Mandarine Zkittlez F1 FV : Genética feminizada y fotodependiente de floración ultrarrápida. Primera generación filial (F1) resultante del cruce entre un clon élite de Zkittlez (muy potente y resinoso, con un marcado aroma tipo Sour Diesel cítrico, entre naranja y mandarina) y nuestra Sweet Mimosa XL Auto (SWS94) que también tiene tonos aromáticos cítricos entre naranja y mandarina. El resultado del cruce es una vigorosa variedad híbrida fotodependiente muy resinosa, potente y aromática. El aroma de esta variedad es delicioso, con tonos Sour Diesel muy especiados, tonos de naranja y mango, fondo amaderado y lejanas pinceladas frescas como de pino o hierba recién cortada. Algunos individuos pueden mostrar flores y hojas con tonos púrpuras y rojizos al final de la floración. El efecto es enérgico, alegre y estimulante de la concentración y la creatividad. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1. 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 3: Muy buena semana, he aplicado un riego solamente con agua de manantial para reducir la cantidad de sales acumuladas en el sustrato y se ha notado una mejoria . Creo que le quedan unas dos semanas por estirar, parece que va a ser una buena cosecha. Se mantiene un buen control del cuarto de cultivo gracias a @marshydro y @trolmaster. Mantengo las dosis de 1/3 de nutrientes recomendados por el fabricante. Potencia del foco 80%
Likes
7
Share
STICKY BROCCOLI 🥦 / ZAMNESIA & PLAGRON WEEK #14 OVERALL WEEK #8 FLOWER As she's getting closer to the end she's filling in all the space in between her buds it's always an amazing sight. She's sticky buds are frosty and you can definitely smell her. STAY GROWING MY FRIENDS 🧡!! THANK 😊 YOU FOR STOPPING BY AND TAKING A LOOK IT'S MUCH APPRECIATED!! THANK YOU 😊 ZAMNESIA and PLAGRON!! STICKY BROCCOLI 🥦 / ZAMNESIA SEEDS
Likes
8
Share
@hooolian
Follow
20/02: The plants are overall reacting well to the larger dose of nutrients especially the ignitor - there are lots of bud sites throughout. I was under watering some plants which has resulting in wilting stems and leaves - will move onto 1 litre of water every other day from next week. 1 OG kush and 1 White Widow is lagging behind but we'll get there. Good strong stalks mostly for all the plants. Gave the a hefty defoliation this week also trimming the fan leaves and letting light penetrate the lower branches and bud sites.
Likes
Comments
Share
@Uneasy
Follow
Towards the end of the harvest, mold developed due to high temperature and humidity. I lost about 30% of my harvest. The buds did not fully mature. Despite all the setbacks, we managed to get a harvest.
Likes
14
Share
Week 3 Update Day 18 (VT18): The nutrient comparison has been running for a week now. While it's too early to draw conclusions about plant performance, the effort required for preparing the irrigation water is clear: GHF is the quickest, followed by BioBizz, and Advanced Nutrients takes the most time. The new pots are amazing—no water leaking out the sides during watering, and the zipper feature for moisture control is a game-changer! Attaching today’s pictures along with a poll for your input. Cam Check Issue: While away, I noticed on the cam that GHF#2 has started curling its lower leaves. It’s well-watered, treated identically to BioBizz#1. Should I repot with fresh soil? Day 20 (VT20) – GHF#2 Emergency: As the title suggests, GHF#2 is in serious trouble. I’ve ruled out overwatering, tap water issues, CalMag deficiency, and soil quality. BioBizz#1, which received the same treatment, is fine. The only variable is the GHF nutrients added during repotting: 2g GHF BioBloom per liter 1g GHF Enhancer per liter Symptoms: All fan leaves are curling from the bottom upwards, while shoots remain unaffected. Unsure what’s causing this, I replaced the substrate entirely with BioBizz LightMix and skipped any additional nutrients for now. The discarded #3 plant was on the windowsill but has been returned to the tent as a backup. It’s looking rough but might be better than losing GHF#2 entirely. Unfortunately, this development jeopardizes the nutrient comparison for GHF, as I’m confident it’s not overfertilization. Let’s see if GHF#2 recovers in LightMix. If it does, the issue was the nutrients. Day 23 (VT23): BioBizz#1: Thriving as expected, consistent with past grows using BioBizz. GHF#2: Still struggling, with all fan leaves curling. Growth is significantly slower than the others. AN#4: Incredible growth and root development—roots are visible everywhere after just five days. Unfortunately, GHF#2's condition has worsened: curling is now spreading to the shoots, moving from the bottom upwards. Growth has stalled almost entirely over the past four days. Next Steps: GHF#2 is likely beyond saving. I may replace it with #3, though its week on the windowsill has stunted its growth. Catching up to AN#4 seems unlikely. I’m considering moving BioBizz#1 alongside AN#4 in the main tent, while #3 gets 1-2 weeks in the smaller tent. However, I’m unsure if #3 should remain with GHF nutrients. It hasn’t been fed yet, and starting an organic regimen this late might not work. Side Note: My girlfriend insisted on saving #3—seems like fate played a hand, and so far, she’s been proven right! 😅 Attaching updated pictures for your insights.
Likes
43
Share
Hi there! Thank you for checking out my Gorilla Glue Auto grow. The grow well other than around week 6 where I over did the feedings. She got a little burned but after some flushing I was able to get some of the excess water soluble nutrients out that was burning the plant. After the flushing she came back hard. She got solid and grew some fat buds coated with resin. Definitely a recommendable strain from Auto Seeds.
Likes
43
Share
🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FastBuds 420
Likes
74
Share
@Mr_Maes
Follow
This week we will see the colas and buds really dense up. We are about 2 weeks away from harvest now. Next week I will start my flush.
Likes
4
Share
@Ninjabuds
Follow
This plant is really healthy and is starting to come around. It has good stacking but is a short plant