Not qui te ready ! I think I'll be startin to flush the big one by the end of the week, seems like it's near the end. You can see that the trichomes are not milky like it is advised on the web, but it's really soon! I now give them 11 hours of light, and next week it'll be 10h. I'm finally seeing the end of it ! See ya, Ferid

Hey there growmies from around the world, we are back! I hope everyone had a wonderful week, and everyone’s gardens are doing fantastic! It is week 11, let’s get into it! Back to the canopy we went this week as I had to get in there to maintain that shrubbery! it’s unfortunate, I didn’t have the same amount of time that I had last week to spend in the tent (at any one given time I mean) and I had to choose between defoliating and continuing to tie everything down to further expand the reach of that canopy. I chose the latter…. Hindsight being 20/20, I probably should have just defoliated first… In doing that , I would’ve improved the airflow, increased the visibility (for when it came time to tie stuff down) and would have just cleared it out a bit making it easier for me to tie things down and weave the plant through the net with LESS fear of damaging the plant. But alas, hopefully this is just something I’ll remember the next time I am faced with this decision….🤷‍♂️🏻 So despite all that I said above, I DID decide to tie everything down- it went well but felt a bit rushed. I got more done than I originally thought so that’s a plus! The rock candy cake is doing excellent though, it seems to be liking the future harvest nutrients, as do the fast buds (they really had some substantial growth this past week) The next few weeks will certainly be a test of patience, I kind of just have to let the plant do its thing while I wait for the canopy to fill out that net. She’s doing a beautiful job so far, but we still have a while yet (especially due to the fact that when I moved her into the 5x5, and had to scrog it all over again- she is no longer center so I still have a bit more to go on that one side) to tell you the truth, I’m probably more curious about what I’m going to do to keep it going on the short side.. we shall see.. sounds like next weeks problem. Something else I plan on doing is that much needed defoliation I was talking about- I might wait two more days just to make sure we are all good after yesterdays antics (the tie down) other than that,I think we will just have to see what’s in store for us this upcoming week, hopefully some insane growth, but I’ll take any progress haha just gotta keep moving forward! Either way, I am having an absolute blast and I hope to see my growmies here for week 12! As always, I hope you are all killin it in your gardens and are able to enjoy only the most bountiful harvests! Later everyone!! 💚🤙🌱

Beginning of week.. Wow she is stacking fast! Stretch has slowed.. may have even stopped.. I'm attepmting to water/feed daily instead of skipping a day every 2 days. After waiting 1 whole day without watering and the pot feels super light.. like if I waited too late into the second day that she would start showing stress.. rather keep her from even getting close to stress right now.. but she is fairly happy and doing magical things! I love this stuff! Next day... Just wanted to take a pic lol... she is doing INCREDIBLE things with these pistils, calyxes and trichomes and not showing any signs of slowing down.. amazing genetics for sure!... Almost mid week... I cant stop taking pics of this girl! So beautiful.. gonna be some FAT colas for sure.. she is still stacking.. but stacking very nicely! The smell, which is a bit too early to judge what the end product will be like, but smells very fruity with just a hint of skunk.. I can really smell the skunk when I first open the tent.. but rubbing the trichomes, I can smell alot of delicious fruity scents.. hard to pinpoint just one.. citrusy of course.. but man.. love this plant so far! A few banches I could hve lollipopped a couple nodes higher.. but even the bottom nugs I left are getting nice and fat! About halfway thru flower at this point.. very impressed with these genetics! Still have been able to water/feed daily now.. there may be some days that I may have to skip a day.. which SHOULDN'T be too stressful on her.. maybe more stressful on me if anything lol. Other than the overfeeding, she is loving life and doing magical things.. ive went down on some nutes already.. but as I mix nutes, they end up at 950 PPM.. so I have concluded that I should go ahead and just drop the micro down from 4 ml per gallon down to 3 ml per gallon.. leaving everything else rOuGhLy the same.. hoping it drops from 950 PPM to 850 or 900 PPM.. and thats with using 75% rainwater and 25% Brita filtered tap water.. which automatically brings the TDS of the water at 75 - 80 PPM.. just a little detail on how I water/feed... and also I use water, feed, water, feed, etc... not flushing.. just running 1 gallon of water/nutrients a day. I love growing in coco coir/perlite.. and fabric pots are awesome too!.. love love LOVE this shit!!! Mid week (1 day late.. whoops)... So I fed yesterday, just forgot to get some pics. She smells absolutely delicious at this point.. skunky but also very fruity, sweet.. citrusy.. such amazing genetics. It almost seems as if this pheno will look exactly like the pic ETHOS has for the Member Berry RBx1.. which he says all of his strains are +90% stable with pheno variations, for the most part.. but man.. beautiful plant.. these flowers are stacking hard and fast (that's what she said) but just.. wow.. now that Ive been using my PAR meter and have a better understanding of uMols and th footprint, and not overfeeding (not like I have been at 1000+ PPM.. but she is still showing some nute burn so that tells me that I WAS still overfeeding this girl.. but I believe I have cut back enough because the burnage isn't spreading much, if anymore at all.. I'm happy with the way things are going with this grow.. perfect runoff.. perfect PPFD.. shouldn't be anything short of fucking spectacular! End of week.. Went ahead and skipped watering today. Didnt want to.. had to.. but she should be fine by the AM.. I'll have to use 1 gal + 1 liter to make up for the lack of water in the medium.. other than that.. she is doing great! On to the next week!...

Day 70: Watered the plants 0.5L without nuts, 4L total, 170 ppm, 360 us/cm, PH 6.5 Flushing from today Day 73: Watered the plants 1L without nuts, 8L total Day 75: Watered the plants 1L without nuts, 8L total

~ FASTBUDS TESTER #2203 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked both seeds for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged roughly 24 hours later. 12/3- Today their tap roots were about 1/4 to 3/8" so at 11 am I transferred them into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By 10pm the #1 seed had her cotyledon leaves opened ...waiting on the #2. 🧐 12/5- Well this is Day ONE for the #1 FBT #2203 and I anticipate seeing her sister poking her head out real soon! I'll keep them in the covered/heated Jiffy tray until I see their roots beginning to emerge from the peat pellet, then I'll transfer them gently into their respective fabric pots. The #1 will be going into the 4g Gronest pot from FastBuds and the #2 will reside in a 3g pot by Wraxly, which I'm trying out for the first time. 12/7- Yesterday I checked the #1 tester and she had roots starting to emerge from her pellet so tomorrow I'll transfer her into her 4g Gronest pot. The #2 tester has finally made an appearance and this will be Day One for her! She looks great and I'm confident that she should be ready to transfer into her fabric pot in the next couple of days! 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙

Welcome to all, Weed brothers! Ready for a new week in Peaky Gardens! The smell of this plant is really very strong and powerful and its buds overflow with resin! We'll see some good ones, so you stay updated!

This week was amazing guys. I literally watched the buds getting fat day by day. I am still feeding with a similar program and adding Aptus Regulator once per week to boost silica and some other minerals like molybdenum and boron. I'm flowering my plants in a hot environment with CO2 boost. PPFD is high to support these settings and thankfully my the pots aren't getting hot. No fungus gnats or any other pests, no root rot and bad smell. Everything is perfectly neat and buds are exploding. My expectations from this harvest is really high and I'll keep adding CO2 for another week. Some fellow growers asked for CO2 and PPFD measurements. I am sharing these information on this week's pictures. I got my CO2 meter fixed and I tested the CO2 PPM in different places of the canopy. Typical value for this grow tent with this CO2 setup is around 1100-1350. Temperature is fluctuating between 28-31 and the average PPFD on the bud sites is 1100 micro moles. I'm sharing CO2 measurements right under the fan, where you expect it to show the lowest value. Then I'll also share the CO2 PPM value coming out from the air pipe, which is normally attached to the grill of the fan. Direct output is now around 5500PPM and in the first two days, the meter shows 10000PPM which is the max value that it can reads. This bucket yeast CO2 reactor lasts for four days and I'm refreshing the mixture twice a week. This is huge CO2 with a fairly low cost compared to propane burners or CO2 tubes. Edit: I refreshed the CO2 bucket today and got you guys a video of the direct output. The system is outputting more than 10000PPM of CO2 and the meter can't measure it for the first two days. This CO2 method is a killer one for tent grows. Very low cost for very high CO2 concentrations. Hope these information helps. Happy growing 💪

This strain was just what I was looking for. After the previous trauma of letting my plant grow WAY too tall, I went into this grow looking for something much shorter and manageable and this was exactly it. The tying down at times were a pain, but one of those things that’s better in the long run. The transplanting kind of screwed me up a bit. Not only did I not really fill the pot enough, but I put them in horribly. The soil was falling apart and it was just an ugly mess. Trying to OD the plants wasn’t part of the plan either but they bounced back just fine. All in all it was a very easy strain to grow. The dry amounts of each plant are as follows. Plant 1: 48.2 grams. Plant 2: 51.8 grams. Plant 3: 46.4 grams. Plant 4: 50.1 grams and Plant 5: 51.2 grams for a total of 196.4 grams (7.8 oz’s)

Giorno 59 Ultimi 20gg. Le rifarò ancora anche perché voglio farle perfette e ancora sto avendo qualche problema con i fertilizzanti (spesso accumulo di sali o carenze di Cal-mag... questi i due problemi in cui inciampo spesso). Detto questo su 5 Crystal Candy 3 sono perfette e questo mi fa sempre ben sperare per il futuro. A settimana prossima 💪 🤞 👊

Day 86 12/05/2021- Week 5 of flower almost done hopefully by the end of the month. Went out on a trip and GoPro never turn on for the last two days bummer but will upload time lapse videos daily. Today the lady got nutrients as well. Day 89 12/08/2021- Today the lady got water, really hoping to see buds starting to fatten up. Day 91 12/10/2021- So today the lady got a special treat, freshly collected rain water. She is just doing her thing and making those buds. I have also finally put the spider farmer SF-2000 at 100%. Also end of another flowering week, see you guys next week. --------Have a good one friends and stay high--------

Day 43 12/06/2021- Beginning of week five of flower. She should be done soon, she will also get her final feeding soon. Day 45 12/08/2021- She got her final top dress today from here on out she is on her own all I will do is water with pain water PH to 6.2-6.8 when dry. Day 47 12/10/2021- She is coming along nicely. Very frosty wish she wasn't a auto so I could of clone her for sure. Today she got a nice treat as it rain in my hometown and that's the water she got. Hoping she is ready by the end of the year. I know she looks funny but she was never topped either. Day 49 12/12/2021- End of the week, nothing new.

Day 86 12/05/2021- Week 5 of flower almost done hopefully by the end of the month. Went out on a trip and GoPro never turn on for the last two days bummer but will upload time lapse videos daily. Today the lady got nutrients as well. Day 89 12/08/2021- Today the lady got water, really hoping to see buds starting to fatten up. Day 91 12/10/2021- So today the lady got a special treat, freshly collected rain water. She is just doing her thing and making those buds. I have also finally put the spider farmer SF-2000 at 100%. Also end of another flowering week, see you guys next week. --------Have a good one friends and stay high--------

Day 43 12/06/2021- Beginning of week five of flower. She should be done soon, she will also get her final feeding soon. Day 45 12/08/2021- She got her final top dress today from here on out she is on her own all I will do is water with pain water PH to 6.2-6.8 when dry. Day 47 12/10/2021- She is coming along nicely. Very frosty wish she wasn't a auto so I could of clone her for sure. Today she got a nice treat as it rain in my hometown and that's the water she got. Hoping she is ready by the end of the year. I know she looks funny but she was never topped either. Day 49 12/12/2021- End of the week, nothing new.

Hello hello greetings! our girls are taking acceleration for a burst of growth! after I transplanted them into 15 liter pots, they began to grow more actively. I did not notice any anomalies or deviations. all plants are doing great. and of course my favorite is number 2204)) she's just cute! and apparently Dominant indica)) I also hope that at least one of them will be colored! watch the video for a closer look at the plants. I also want to say a few words about my New Light from MarsHydro! as you can see plants of different heights. and the difference in distance to the light source is significant. but this does not seem to affect development. all plants grow equally well and receive every ray of home sun from MarsHydro! and also welcome to my instagram: https://www.instagram.com/zurbanpoisonia/

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues