Bud voilette très résineux

Bud voilette très résineux

Week 7 (06/03 - 12/03) During this week I will continue to feed the plants mainly with Bio-bloom and Top-max every two watering day; I will consider to use Bio-grow too according to the status of the plants. At the moment, the Fat Banana #1 is shorter than others about 15cm but more bushy, it's funny because during the first two weeks of their life she was the taller one. During the past week, the Blue cheese has grown a lot reaching the taller Fat Banana #2. At the beginning of this week they both are 65cm tall. I bought a pH tester so, starting from this week, I will also adjust the pH level in order to maintain it between 6.0 and 6.5... better late than never. 06/03 D43: watering day. Added 2ml of Bio-bloom and 1ml of Top-max to 3l of tap water. I've adjusted the pH with 1ml of Terra Aquatica pH- to obtain a pH of 6.4 07/03 D44: - 08/03 D45: watering day. One liter of tap water each (pH 6.4). Note: I usually fill the watering can the day before and store it into the tent to avoid to use cold water. Yesterday I tested the water and I found a pH level of 7.4. This morning I re-tested the water into the watering can before watering and I found a pH level of 8.0!!! I guess that, every watering day during which I only used tap water, the pH level has always been far high. Could it be due to an accumulation of "salt" into the watering can?!? 09/03 D46: - 10/03 D47: watering day. Added 1ml Bio-grow, 2ml Bio-bloom, 1ml Top-max and 1.5ml Terra Aquatica pH- to 3 liters of tap water. 11/03 D48: One liter of tap water each @ pH 6.0. I'm trying to lower the pH because I noticed that the Fat Banana #2 has two/three fan leaves yellowing from the bottom. 12/03 D49: added 3ml of Bio-bloom and 2ml of Top-max to 3 liters of tap water.

Germination was very simple, paper towel for 40 hours. I always use a few sprinkles of Mycorrhizal Inoculant to boost the first stage of the growth when they are moved to the cups.Every 6 hours i check for water and humidity.

Day 74 - Wiz Stash - Flush with water - 1 week from chop - Gorilla Cookies - Flush with water - 1 week from chop - Gummi bears - getting fat - est. 3 weeks from chop - Vibe: 😜 Day 50 - 3BOG x Samsquanch - FLOWERING! - No further LST - Allowing her to grow - Vibe: 😎

This plant started twisty and circular. It was burned early on from sprout - due to hot soil. Then again later when I burned her with a foliar spray in the 24/0 cycle. Out of all that, she continued to grow in circles, but ultimately produced some beautiful and elegant buds.

Having a great time running this 3 gorilla punch from 42fastbuds genetic can’t wait to get to run some more stain that was a amazing opportunity thank everyone who is supporting me and my little brand

Having a great time running this 3 gorilla punch from 42fastbuds genetic can’t wait to get to run some more stain that was a amazing opportunity thank everyone who is supporting me and my little brand

Getting close. Started to flush, still prob 10 days or so out but getting close. Been a long road def the longest growing strain I’ve ever messed with but they buds look like they’ll be worth it! I’ll post again here in the next week or so when we harvest. Thanks and as always 🍻

final defoliation

Heya farmers, not much to update, the buds are fattening up, its late flower, the tent REEKS. very sticky flowers! Waiting for about 10% amber on my trichomes, we've got 100% clear still.

Hello growmies! Welcome to week 13 for Karen, this Kings Kush Auto. Last week is complete so please check it out! She is fully focused on bud maturation now and the smell is incredibly strong. Due to external factors, there is a 90% chance I'll be chopping her at the end of this week even if she isn't ready.

First week of Flower. Girls are starting the final stretch before forming the flowers.

So these are 2 cheese plants, one goes in 12 liter airpot and the other goes in autopot when it arives in the mail

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ We planted 5 seeds, our goal is 2 plants of this strain for this 4x4 (all extra plants will live out in the 5x5)..we're using a brand new light for this grow, the Solux350 by Hortibloom! 💡🌱(https://hortibloom.com/products/solux-350-led-grow-light)... This tiny fixture emits a ton of light for its size..we have 20 seedlings under her, hung at the recommended 24inches and at 25% power..I'm really excited to see what this light is capable of! Thanks for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -The Solux 350 uses an aluminum heatsink (no fan), quiet operation 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Many units may be daisy-chained via RJ14 and dimmed from a single controller 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ We planted 5 seeds, our goal is 2 plants of this strain for this 4x4 (all extra plants will live out in the 5x5)..we're using a brand new light for this grow, the Solux350 by Hortibloom! 💡🌱(https://hortibloom.com/products/solux-350-led-grow-light)... This tiny fixture emits a ton of light for its size..we have 20 seedlings under her, hung at the recommended 24inches and at 25% power..I'm really excited to see what this light is capable of! Thanks for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -The Solux 350 uses an aluminum heatsink (no fan) for quiet operation 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Many units may be daisy-chained via RJ14 and dimmed from a single controller 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~