Strain was easy to grow. Had some herms but since I only have 2 plants I was able to pinch the balls off. Buds have no seeds and are a strong smoke. Really hits the lungs.

Hi everyone, brothers and sisters of Weed! The beautiful glazed wedding cakes are strengthening quite well, their sprouts are beginning to escape from the net and their leaves do not show any kind of growth problem .... we continue like this!

In attesa....

Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D50/F11 - 12/10/23 🛠️ EC 1.3 (stable) pH 5.5 (raised) -- pure water 🌊 RES Changed 💦💦💦 💼 Made some LST on the little one. No more work on the bigger 🧠 I'm going to change the water within today and run it for 12-24h and then put only bloom nutes 🚀 ________________________________ 📅 D51/F12 - 13/10/23 🛠️ EC 1.3 (by set up) pH 5.5 🌊 New water, calmag, bloom A and B and B52 💼 Removed all LST constraints on the big one. Some spouts removed from the little one. Some defolation 🧠 All training was removed now I will let her grow normally 🚀 ________________________________ 📅 D52/F13 - 14/10/23 🛠️ EC 1.0 (falling) pH 6 (rising) -- EC 1.3 pH 6.1 🌊 No water added. Added Big Bud and Bud candy to raise EC until 1.3 💼 LST and defolation on the little one. Made Timelapse video. 🧠 She's eating a lot: very good 🚀 The little one is sprouting out the first petals ________________________________ 📅 D53/F14 - 15/10/23 🛠️ EC 1.1 (falling) pH 5.2 (falling) -- EC 1.45 pH 5.4 🌊 Water decresed a lot. Added 4L and Bloom A-B - Calmag and a little of Rhino Skin (silica) 💼 LST on the little one, some defolation on the big 🧠 I would like to have only nice big fat buds, so I need to work on this goal 🚀 ________________________________ 📅 D54/F15 - 16/10/23 🛠️ EC 1.5 (rising) pH 4.7 (falling) -- EC 1.4 pH 5.4 🌊 Water decresed a lot. Added 6L Bloom A-B and lot of Calmag 💼 Only a little defolation 🧠 Next time, no calmag at all 🚀 By mistake I added a lot of calmag so to balance I have to add lot of water and now the pot is completly full. Keep in mind there is a lot of Calmag in it ________________________________ 📅 D55/F16 - 17/10/23 🛠️ EC 1.5 (stable) pH 5.2 (rising) -- EC 1.2 pH 5.4 🌊 Added pure water and a little of silica (Rhino skin) 💼 🧠 🚀 Some leafes tips are burning, so I'm going to go back to 1,2, trying to have a good pH range ________________________________ 📅 D56/F17 - 18/10/23 🛠️ EC 1.2 (stable) pH 5.7 (rising) 🌊 No water neither nutes added 💼 Little defolation 🧠 Maybe the Thrips from Granada come out and infected Marlene. I will spray also her tonigh 🚀 Some symptoms of insects like leaves bitten

Things have been pretty much hands off since flipping to flower. They haven't even been wanting water lately. Which is weird cause they usually start to drink a lot more during the first few weeks of flower especially during the stretching phase. But they're all still really happy and healthy! They're also due for a feeding too. It's been about 24 days since the last feeding. Which was the 50/50 ratio of Gaia Green's All Purpose and power bloom. They got that during the their transplanting 24 days ago. But I'm going to hold off on feeding because they're all still looking like they have enough food. Still really healthy and dark green. And the very tips of the leaves are still yellowing. Which means they don't need anymore food.

D91 Still a couple of weeks to go at least. She is putting on nice long bud mass as all bud I'll get off her will have very few sugar leafs. And with the top 30cm of the nodes bent outwards it's allowed the light to reach down deeper into the plant itself, and well, you can see the results, bud sites galore. Not much left to do with her. I threw her into a heavy flush for 24hrs first flush run-off was coming back at 2900, way too high, salt and nute residue is been left behind because of the poor P-K uptake that control the spread and uptake of nutes. Got her down to 980 today with her final flush before going into her rest. After the flush I poured 100ml of 2ml/l of cal to help break down the nutes behind so the plant can uptake them, this is very important when doing a flush to lower your TDS add some cal to it as this will keep the plant sucking not only thr water and leaving the nutes behind, cause you need cal espically in subs with nute build up it has to be broken down and will help to avoid nute lock or going into an unwanted flush to early. I'll be dropping her next feed by 200ppm down to around a 1000. I will still give the nutes I've been given just a little less and she needs to get ready for a flush but be kept with enough to keep her mass of growth going. RH is between 55-60%:air been blown in is reading at 48-50% temp is 22c in tent it's 21.7c in the dark and 27-28c with the light on. With my new 4inch intake smart fan im going to set it up so it blows 100% air in at the top and a 4inch intake fan will suck out 80% I'm hoping by doing this it will change the RH of the room 48-50% into the tent creating the same environment. The air that is brought in is filtered by a carbon filter, no need for 1 to blow the air out. 19/3/22 As you can see I have the RH as best as I can get in my grow room, I've installed the smart fan and inserted the sensor giving me 57%RH 75F in the tent, with the light off, it's rather hot today, much hotter than normal, it's normally 21c in my room it's 24.5 today. RH is at 50% in room, hopefully by installing my old intake fan in the lowest part of my tent and suck out 80% While 100% gets blown in on top will bring the tents RH to the same as the room, that's the hope anyways. But 57%RH is still okay, not optimal but not too bad neither 21/3/22 So, I tried out my new method. Of having my smart intake fan suck in 50RH and a bottom intake fan at the end sucking out older air at a lesser speed had it running for 8hrs, no change in humidity whatsoever just dropped the temp by 1.5c. I think the fact I have a 70x70 with so many plants has set the RH and thankfully it's not what it was which was touching on 80rh at some days. A bigger tent and I'll really be able to dial in my grows now I have all the tools to control RH/TEMP from S/H. For now 57%RH when it's low and 62% when the lights are on for a few hours. Stays around 57-60% atm for around 85% of the time. Temp is constant and doesn't change without my control within a range of 4-6c change difference, this number I have no problem in changing and I'll be making my tent a lot cooler after this wk ends. I'll be keeping her at 18c with lights off and 28 with lights on. As for the plant, she has fully turned the corner and I can say whatever the issue was, which no 1 can still tell me what it was not do I know. It wasn't a def because it was so random and hit all different levels of growth. But, thankfully she has passed it, am really dialing in this coco grow. I know exactly how much water she takes without spilling a drop of run-off unless I want it to. The buds, well, they are small at the moment but they are so fucking dense and hard I really hope they get at least 30% bigger of the next 2 wks. The last few days some has but on at least 10% bud mass and all sites have moved out of pre-flower (stigma), so growth is over for the plant, it's just bud sites now, how you can tell is your sites will start to give off their aroma and will start to get sticky to the touch. 85% of the plants buds are all in the same range mature wise or only a few days out from their sister buds. Still some 15% that still has stigma but as this is at the bottom of the plant I know she will not grow anymore but maybe a little if any around these sites. 21/3/22 GRRRRRR stupid rust spots all over her again today, yday she got a mix of all the nutes above, one of these nutes is causing this, I am 75% sure it's overdrive. Really annoying, as there is no deficiencies, no signs, just these poxy rust spots. So annoying, as NO 1 can tell me exactly what they are, it's not a def, the plant ozzs health, she's the pic of it, every leaf stands tall, very good color, slight old nute burn very little on about 10% of the leafs but these stupid rust spots are stupid. Overdrive, or 1 of the nutes is doing this, I reckon it's this as it's only been given that the past 10 days and I'm nearly sure this is the cause, but I can't be sure, and until I figure it out I really don't feel comfortable moving forward with the AN line. Sadly I think I'll be dropping everything but big bud, bud candy&voodoo juice. 22/3/22 Was going through my buds and man, they are so sticky you would nearly say they are done until you look close at them, there still full of pistils, white hairs, the bud growth will come past them, so there is still a big push yet to come so I was hoping to start dropping the micro nutes but I think that would be a massive mistake and cost me dearly on harvest day. Fuck it, I'll flush the shit out of it for 2 weeks on flawless finish and then a week on water and 2-4 days in the dark just on water. With much thought I pushed the PPM back up to 1450. I've decided to drop overdrive. After 24hrs of flushing my coco like crazy I'll be happy to start her back on nutes in 24hrs when she's drank the 2.8-3.2l of water she's currently holding, the run-off from that was 1800 btw, but with salts and so on from the last feed I've learnt with AN the PPM reading is what you give it, not always the Run-off. Yeah I'd trust the PPM reading 2moro if i was doing another ppm run off test, but as im not ill go by what im putting into it, cause my weekly flushes/flushing in general in pretty good, very little nute lock experinces with mixing so many nutes 22/3/22 Messaged AN and sent them pics and info, by going through my nutes and the fact that I gave some big bud in the same window as overdrive causes these rust spots. Thankfully I finally have an answer as to the rust issues. Just a bad mix with nutes that shouldn't come into contact with each other. Thanks AN Thanks for reading, drop a like and I'll know u drop by and I'll do the same gottagrowsometime

What fun she was to top dress and forget about. 😂 She are a little extra in flower, but most do. She coasted in green sensation at the end. Loved how easy it was. Awesome Irene at Promix provided the media for this grow. Very greatly appreciated! 💚😻 https://www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae US link, but it will also get you where you need to go. Easy site to use. 😁🤘 Slf-100 by South Cascade Organics https://socascade.com Enzyme clean up. Breaks down decaying matter and salts. Cleans root zone. I use in organic and synthetic Thank you for your comments and encouragement 😻💚💚😁🤘

She’s getting fat! Smells berry and gassy , gonna def be some good smoke. Gonna go 65 days I think 🍓🌲💨⛽️🤟🏻

82.5 grams she taste so good ... thanks for all the love everyone

A lot of rain and wind, continuously. Temps have dropped as well. I’m reading another week or two to chop this plants. Sativa dominant hybrids did the best, the Fastberry and the banana purple punch did not really develop as the other two. In specifics the cbd crack developed sizable buds, and the blue dream as well, the flowers are not as developed tight and dense as in the indoor grow. A bit of fox-tailing nothing too expressive. Minimal work, as per the setup chosen, an no extra nutes this week.

For the first time, I tried working with enzymes in the irrigation water. These are supposed to break down dead roots and plant material in the soil and make it available to the plant as food. I'm curious to see how it goes. After the first three weeks of light changeover the flower transformation is done. Now it is the right time for defoliation and lollopoping. In case cherry high lollipopping wasn’t necessary I only removed one or two popcorn buds and a few leaves. Light Power: 100% Day 72 Flower day 29 Photoshooting Defoliaton

Honestly not much to say about the dry and trim, which is definitely a good thing. 12 days hanging in the tent, and the plants were ready to trim. me & the Mrs. absolutely sailed through it. Stores like a dream, and smokes the same. Not a crazy amount of flavour, but the aroma that it has is lime and cream. And the taste is more earthy and spicy. Loving and savouring every bit of it. Sorry I’m very late with this, but I’ve been busy getting my next plants started! You should see them come up soon, as I’m quite behind in my posting. I’m very happy! 🤟💚

9ª Settimana di Fioritura 💐💐💐💐💐💐💐💐💐 Eccola la bellezza pronta per essere raccolta! 🤩😍💚😋 Questa settimana beve solo acqua per purificarsi bene dai fertilizzanti 👍🏻😘

Hello all! This plant looks mature and I have a microscope but the thing is I thing it has over ripened and, some trichomes fell off? Or let me tell you my trichomes never turned MILKY OR WHITE. Some of them are amber tho. Anyways, on growweedeasy.com there is a guide that says : Harvest even if your trichomes are not ready. I guess it will be more a gut feeling to chop or not chop. Any input greatly appreciated. And yes, I have chopped down the main cola and dried and smoked it. I guess it gets me high but I smoke all the time so it's hard to evaluate because I have also bought quality weed to smoke So guys, only from the photos, what do you think? My trichomes looks like half clear %10 amber. Do you think it could go to amber without stopping at milky? Or milky trichomes fell of but there was new growth and I could never see clear trichomes? INPUT ? :)

💩Holy Crap Growmies We Are Back💩 Well growmies we are at 21 days in and everything is going great 👌 👉 Shes a stout little plant , chunky too , im gonna do a little bit of some low stress training 💪 Preflowers now showing 👍 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Here we are day 55 for our Watermelon Candy F1 Hybrid. I would immediately like to say, do you notice anything by any chance? I said day 55 and we're pretty much ready. The leaves are turning yellow regularly, I have removed the fertilizers, the pistils are ripe, the resin is out, there are all the signs for a harvest which should take place towards the end of next week. The plants were born on April 6th, I repeat on April 6th for those who cannot grasp the concept. Most certainly Watermelon Candy and Wurlz will be harvested around June 6th, guys...8 weeks...not even 9 or at most nine weeks. If you're good at math, you do it otherwise I'll lend you some fingers. For topping lovers it means that if you want to do topping on autoflowering plants they won't finish in biblical times, according to my calculations even doing topping shouldn't go beyond three months, like an autoflowering from the previous generation. Why am I talking about the previous generation? Because these have certainly moved forward with speed, I have seen them grow and above all swell the flowers like I have never seen them do. As for the rest of the resin and pistils, everything is really in place. I want to do a terpene inspection soon and evaluate the ripeness for the harvest. Strong, fast, stable as promised by Zammi. https://www.zamnesia.io/en/10666-zamnesia-seeds-watermelon-candy-f1-automatic.html Feeding is by Plagron with the Power Buds - Sugar Royal - Green Sensation + Alga Bloom combo that drives me crazy https://plagron.com The lights are from Viparspectra p2000 and provide super light www.viparspectra.com/ Tent & Air www.secretjardin.com Music of the week www.radionula.com +++ 432 hz frequencies to keep in line my Girls to Gaia. Site Description ZAMNESIA SEEDS - WATERMELON CANDY F1 HYBRID AUTOMATIC: BUDS BURSTING WITH FLAVOR If you've been looking for a flavorful strain with superb genetics that's effortless to cultivate, the hunt is over. Thanks to reliable F1 hybrid genetics, Watermelon Candy F1 Automatic showcases the highest degree of productivity and efficiency. This strain takes everything you know and love about the original, and packages it in a plant with even greater potential. GROWING WATERMELON CANDY F1 HYBRID AUTOMATIC Derived from Watermelon, Candy Kush, and ruderalis, Watermelon Candy F1 Automatic is a finely tuned medley of genetics. This cultivar is fast to flourish and reliable to grow, no matter where you choose to grow. Taking just 9–10 weeks from germination to harvest, she provides a uniform growing experience culminating in a huge haul of buds for her size. Reaching heights of 65–80cm, Watermelon Candy F1 Automatic stays pretty grounded, making her perfect for smaller growing areas where space is a commodity. It also means you can fit more plants in if you have the room! Once ready to yield, growers will see a return of 400–450g/m² indoors and up to 100g/plant outdoors. Moreover, Watermelon Candy F1 Automatic is highly resistant to pests and disease, making it an ideal strain for newcomers and fans of low-maintenance cultivation. AROMAS, FLAVORS, AND EFFECTS OF WATERMELON CANDY F1 HYBRID AUTOMATIC If we haven't already sold you on the power of F1 hybrid genetics, the proof is in the pudding. Watermelon Candy F1 Automatic is teaming with terpenes and cannabinoids, making for a lively high coupled with huge flavors. Just one hit is all it takes to sample rich fruitiness mixed with sweet candies and a slight earthiness to back it up. And with an average THC content of 23%, the effects are euphoric at the start but settle into deep relaxation soon after. Whether you're chilling alone or with friends, Watermelon Candy F1 Automatic will see you right. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io

Number 11 🐝 i will go very hard on this one

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.