1/11/2024 Vegetation Week 1 Day 1- I have a root almost in the water.. Yay!! Top feeding is almost done. she is looking a little sad as I work the transition Top feeding but once the roots are fully in the water she will start to take off. Ensured my PPFD is set between 250-300 it is set to: 258 1/12/2024 Vegetation Week 1 Day 2- I have a root in the water.... NO TOP FEED TODAY SIR!!! now that a root is touching the water and she looks stable, I am not going to topfeed, I will see how she looks tomorrow and as long as everything looks good I am going to go ahead and do a change and week 1 fill on Nutes.. I know it is a couple of days in but the same Nutes go through Week 2 and get changed at Week 3 So I should be good to go.. I will just ensure I fill to root touching the water when I change tomorrow. 1/13/2024 Vegetation Week 1 Day 3- Water Change Day!! I added 36 Gallons of Water to the system: Silica= .5mil/gal= 18mil CalMag= .75mil/gal = 27mil FloraMicro=3.0mil/gal = 108mil FloraGro=2.0mil/gal = 72mil FloraBloom= 2.0mil/gal = 72mil PH DOWN= 30mil Very important thing with this system is to now wait the 24 hours for the system to adjust.. Do not make any further adjustments to your PH up or Down for 24 hours to allow time for the system to balance. 1/14/2024 Vegetation Week 1 Day 4- Today I just adjusted the PH to ensure that it was right at 6.0 1/15/2024 Vegetation Week 1 Day 5- Today I Cleaned up the lower damaged leaves from the transition from top feeding to roots in the water. She looks good today. 1/16/2024 Vegetation Week 1 Day 6- Today I just took a picture of the beautiful lady for Log. Other than that just normal day to day operations, check the pH, check the Humidifiers and fill as necessary, check level of water in the Res. Everything looks great. onto Tomorrow!! 1/17/2024 Vegetation Week 1 Day 7- Today I filled the humidifers, checked the PH and just let her grow.. Grow baby Grow.....

Las nenas tomaron bien el cambio fotoperiodo se nota como ya se van preparando para lo que se viene que serán otros 2 largos meses en su fase de floración. Se comenzó a aplicar Top Bloom de Top Crop intercalando los riegos entre agua, fertilizantes y micorrizas. Seguimos ...

This first week of flower was entirely uneventful.

In der Übergangsphase zur Blüte zeigt die Blue Lobster eine deutliche Reaktion auf die eingeleiteten Korrekturmaßnahmen. Rückblickend auf die späte Vegetationsphase wurden knittrige Blätter und eine zunehmende Aufhellung des Blattgrüns analysiert, wobei Faktoren wie Lichtstress, VPD-Abweichungen oder pH-Schwankungen nach intensiver Prüfung ausgeschlossen werden konnten. Als eigentliche Ursache wurde ein Transpirationsstau in Kombination mit einem Nährstoffdefizit identifiziert, woraufhin die Umstellung auf Advanced Nutrients, eine Erhöhung auf 2 ml/l CalMag sowie eine gezielte Entlaubung zur Verbesserung des Mikroklimas erfolgten. Auch wenn das Problem zum Ende der ersten Blütewoche noch nicht vollständig verschwunden ist, zeigt der neue Austrieb bereits eine klare Besserung und eine Rückkehr zu satteren Grüntönen, was bestätigt, dass die Anpassungen gegriffen haben und die Lady sich nun nachhaltig stabilisiert. Mit diesem positiven Trend und einem regenerierten Stoffwechsel startet sie nun vielversprechend in den Stretch der generativen Phase.

Last days in veg. I did the final defoliation before flipping to bloom. I’m really excited — the veg phase was super easy and a lot of fun with her. She’s definitely a training beast and constantly asking for nutrients.

Took off single and double blades leaves. Reveg growth continues to look less and less like flowering growth. Repotted the smaller clone into a 5 gallon smart pot with a mix of happy frog soil, perlite and peat moss. Feeding plants once a week now. This plant is super bushy since it came off a flowering plant. I will be taking clones off this plant.

She is pre flowering enter phone ring I would imagine this week.... I expect a pretty nice sized tree

This one took a longggg time to finish, i ended ip harvesting at the end of 11 weeks. the best way to describe the end smell is grape and pinesol, its very aromatic even at 3 weeks post harvest. incredible terpene profile

Soweit alles 👍 Wetter is die Tage auch ganz gut so das sie jetz auch ordentlich Sonne draußen tankt😁 Denke 1-2 wochen braucht sie min. noch.

The the buds were small so it made trimming a nightmare! But it’s done and the end product is worth all the time. I have loads of trim and small popcorn buds that will be dry Ice sifted and pressed into a hash brick. Will update the diary when I have some bcp hash Weighed up the trim at 588 grams, used my trim bins with dry ice to sift the trim and pressed it into blocks using a rosin pre press, I’ll now jar this and put it to one side. My first time doing this, definitely worth the effort!

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 17/11/2019 - Pot feels light and the is bottom dry to the touch time to water, gave her 1,5l of water PH 6.2 with 0.5ml Grow, 1ml, Bloom and 0.5ml Max Biobizz reduced the dosage from last time, watered util some runoff appeared. 18/11/2019 - Mixed another batch of Alg-a-Mic 2ml per liter to spray on lights off PH 6.2

Muy buena genética, me quedé con el pheno 1, ya que tenía más resina y un mejor terp para mi gusto. Buen híbrido no te deja superaplacado y ofrece un efecto cerebral eufórico.

Just been transplanted a bit slow compared to the others but she will catxh up🎄💪👌🌅

Hi growers! Harvest time is finally here and with it the end of my very first diary on GrowDiaries. I honestly didn’t expect to enjoy this platform so much and I’m really glad I joined the community. Thank you all for stopping by, for the support, and for every comment. I have a lot of strains on my radar and I’m looking forward to sharing my next growing experiences with you! Peace and happy growing ✌️

Another week of epic growth: the Haze sisters put on 20cm, and their myriad buds grew considerably, though I worry that I have allowed far too many buds to form - each plant has several dozen, which I suspect may stunt their growth?

Very impressive vigour with this strain. Now that the roots are expanding and water activating nutrients, between week 3 & 4 is where I would expect to see exceptional growth. Very happy to date. I will have to select topping or LST sometime this week to keep her on par with the others.

she should have been cut 2 weeks ago ... but I want to leave her 80% amber something KO ... will be cut the first week of February .......

The last week of vegetative state. Some of those are pretty dense, they look like salad. Maybe adding a bit of blue to this 80 CRI LED is a good idea to get a bit more elongation. Work a lot on LST tonight. I'm trying to make some clone with a technique I've seen long time ago. I put the cube directly on the plant. I remove the skin surface of the branch before putting the rockwool cube around . All cube are wrap in plastic to avoid excessive drying. No hormones. I will wait one week before cutting those clone out of the plant( thats my dead line before flowering). They all receive 200ml of PH 6.5 water this morninig and 200 more this afternoon. Next watering in the morning tomorrow, Working on ESP32 wifi based co2 meter for controling co2 level in the next grow. =============== 2020-05-26 =============== Everybody receive 300ml of ajusted 6.5 water. Adjusting LST and adding some defoliation. Watering clone/cube with 5.5 ajusted water with blunt top a seringue. ========= 2020-05-27 ========= Trying to water 3X day the clone/cube with 5.5 ajusted water with blunt top a seringue Everybody have received 125ml in the morning. Worked on the low cost wifi Surge protector 6 space smartbar. 15AMP@120v https://mygeeni.com/products/geeni-gn-sw003-199-surge-smart-protector-white/ Found a way to get rig of the cheap stock firmware. Flash it with a alternative firmware(tasmota) using wifi/without any opening/soldering. Those are pettry nice , timer capable, you can remotly control and monitor them After setup you can acces the bar using the small web interface or via a MQTT server and home automation software. I've posted a image of the result for those 2 examples. So im thinking to turn this into a tutotial to help grower to acces flexible technology and software at resonable price. You can comment to signify your interest in this! =================== 05-29 ================== Everybody back on water until monday/switch to flowering. Added some tutor for the next stage. Moved the cam for top view I cleanup/defoliate the bottom of each plant.