Bueno, le salió la radícula en las primeras 24h, pero quise esperar a que se desarrollara más antes de transpartarla al sustrato, tras pasar más de 48h me quedé sorprendido que siguiera (aparentemente) igual, la pase a la tierra(💦mojada en el centro con 100ml del agua que utilicé para germinarla), se me hizo eterno esperar a que sacara la cabeza, tremenda alegría al 4 día ❤️🙌🌱, al ver el sustrato relativamente seco volví a mojar💦(esta vez con la mitad, 50ml aprox.). Decidí comer hummus (como ella jijiji) y ponerle el plástico de invernadero con la idea de manter la humedad alta💦💦💦

Hey everyone 😀. On flowering day 59 both came into the darkroom and on flowering day 61 both were harvested :-). Both were very easy to trim 👍. Both of them already smell very tasty but more on the last update because this is only the short intermediate update :-). The trimmed buds were laid out on nets so that they can now dry at 62% humidity for 8-14 days before fermenting with 62% boveda packs in the jars :-). I wish you a lot with the interim update of the harvest and we'll see you at the end 👍😃. Stay healthy and let it grow 😀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Last 2 weeks. Gave them nutrients for half of the week and started to flush then. Want to have a nice flush this time to see the effect on the buds. Getting closer and very excited!! 😍

Esa familia, de nuevo volvemos actualizar las skunk, y es que me encanta es una variedad que crece con un gran tallo y corta distancia entre nudos, muy vigorosa, 2/3 crecen bastante guay, pero hay una que aunque también crezca bien se quedo algo más pequeña. Ph en 6,5 temperatura y humedad controlada, con muchas ganas de ver cómo empiezan a formarse las flores y todo su progreso.

Day 1 Never grown before, but always liked plants. Especially plants like these 😊 Seeds came today. Only one will be grown for now (Bloody Skunk Auto). The seed was slightly scraped (purposefully), and then placed in distilled water. Seed sank to the bottom with a little push after 6 hours. Hopefully that's a good sign :) Seed was then taken and put into rooting medium. Currently lights are on 24/0 to warm the area surrounding the seed. Tomorrow temperature/humidity measurement will be set up. Day 2 Was able to measure the temperature. It's about 22 C. Natural humidity is a bit low in the area (35%), so a humidifier is being used occasionally to increase that. Seed has sprouted now (15 hrs after being put in the rooting medium), maybe in two days there will be some real growth 😊 Day 3 Root looks like it's off to a good start. Positioning seems a bit off though. Will keep an eye on it for the next couple of days. Day 4 There was a surprise waiting today 😁 Plant pushed through the piece of sponge at the top without a problem apparently. The light has been switched to a 125W 5500K CFL, for now without any reflector. A bit worried that this might be too strong, especially for a seedling. However there aren't other 5500K or higher Kelvin value lamps available, so going with this one for a couple of days. If there are problems, will go back to just a collection of 2700K bulbs and hope the plant survives haha. Got a heating pad, so now the temperature is being kept around a comfortable 73-76 F. Night temperatures should drop to around 66-68 F. Lighting schedule has been switched to a 20/4 schedule, to allow for better plant development. Will probably stay with this schedule for the first couple of weeks. Could also see the taproot poking out of the Root!t sponge. Not sure if that's going to bad for this root to be exposed to light at this stage. Once (if) the leaves start to get wider than the Root!t sponge the plant and sponge will be transplanted to a small 1 Liter pot. If the roots continue growing but the plant stays stunted then it will also be transplanted. Andddd....got nervous about the 125W lamp. Decided to switch it out for the previous lights (two LEDs, two CFLs, all at 2700K). Total lux value is about 10000 measured by the seedling. Seemed also like the seedling might have been craving some water, so gave it a few drops. It hadn't been watered since being planted. Hopefully not over-watering here... Day 5 Seedling has grown by another centimeter. Leaves haven't really changed that much. Nevertheless, decided to put the seedling in a slightly larger container. The cup was taken and filled with some potting soil (Compo Sana Anzuchterde) and the Root!t sponge put into that. Did this because the tap root was poking even further out of the sponge and didn't like that. Gave some more water, mainly in the lower section of the soil. Will not water again for a few days unless it seems really too dry. Don't want to over-water 😑 Day 6 Seedling doubled in height. Starting to get concerned about stretching. Read conflicting information about the optimal humidity for seedlings, but most seemed to say that less was better, and a humidity dome not necessary after sprouting. One source suggested that seedlings stretch when under a humidity dome. So that's been removed. Switched to the 125W lamp as well in case the seedling was stretching because of not enough light. Added a fan for a breeze to occasionally move the seedling...hopefully this will make the stem a bit sturdier. First set of leaves has begun to develop a bit more..but it seems a bit slow. Might just be being impatient 😄 Day 7 Not much has changed. Soil is getting to be dry enough where watering again should be ok. So that will be done tomorrow morning, with a small amount of BioBizz RootJuice.

Thanks everyone for visiting my diary. Will continue to use this great site and share my grows with fellow brothers.

2 plants made it to harvest. Small nugs, about an ounce per plant dry. A lot of frosty trim and small nugs I’ll be using for hash later. I had rooting issue when I flipped to flower that definitely negatively effected nutrient uptake. Small yield but quality is good. Smells almost like a sugary jelly bakery. Cured for a week, tastes sweet almost.

Sweet Bourbon Kush auto has exploded in growth in the last week. She got her second heavy dose of lst today. She is looking pretty strong, and healthy. Hopefully it continues. Thank you Super Sativa seed club. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Starting week 2 Veg - See below for specs Nutrient feeds remain the system Height - 2 inches (Not much progress in height) Width has definitely grown out Water feeds continue to be everyday - Have a gallon+Nutes Light Intensity - 100% *Mid-week review - 8/18* Introduced Cal-Mag (4 ml/Gal) Plants grown approximately .5 inches in height - 2.5 -3.0 inches in width Light Intensity 100% *End of week recap* (08/20) Both have grown about 1 - 1.5 inches in height and 2 - 2.5 inches in width. Fan leafs deep lushes green Bud sites topped Thus far all is running smoothly.

This first week of flower was entirely uneventful.

Hello growers and tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 Settled great after last week's transplant. Start giving her grow nutrients this week and she got a nice stretch. I also topped her at the beginning of the week. These photos are from when I topped I couldn't get any pictures done at the end of the week. She took the topping nice and is growing fast. Unfortunately this is her last week in veg, next week I flip to 12/12 because all the other ladies are ready. Stay tuned for updates on this little one. If you like what you see check out the other strains sharing the tent. Have a great Cannafam!

day 5 flowering, i did some LST with rope they look healthy also transplated one into a 20L pot 2 days before they went into flowering, with soil wich has 3month fertilizer in it see how that turns out. the one in the 12L pot has thicker branches so harder to bend so im not taking too much risks on that one. they stretched a bit every day and start to go into the pre flowering stage in a week or 2 the flowers will start pop up from everywhere O.o see you next week

1 more week;)))))

Just perfect harvest thanks to Platinium for their great fertilizer and to barney's farm for this strain that I recommend a just incredible taste🤤🤤🙏

going fine try trim away most fan leaves. Last day week 8. 2 more days with Nutrients then i am going last time with just Nordic spring water 💯🙏💪💪

Started lst this week that's about it just cruzing. I do hate pics maybe it's my phone but they much greener in person.

had to harvest a bit early as it looks like it turned hermy on me .... hope the clones dont do the same update- Turns out I harvested a little early for nothing but it's not a huge deal seeing as it was in flush anyway. Update- today is Sunday it's been 3 days in the drying period and I came to the conclusion at the buds had so much resin on them that if I did not remove the leaves it would be exceedingly difficult to do so in a couple days I'm not sure what the updated weight would be update - here we have it ladies and gentlemen finish the Harvest putting them into cure now I pulled a tiny butt off and had a small hit and I must say it feels nice and a very little bit got me quite High. I'd say the high feels more in the frontal cortex of my mind

Hi guys Welcome 🙂 After more than month postharvest , I have tested this Blue Gelato #41 🍦🌱 In the end was passed 78° days in flowering for the right maturation I can only say.. Awesome 🤩 About taste , perfume and effect Also the grow inself was fun and not to hard In the beginnig my plan was to growing her in a natural way But in the end I have decide to topping her and create a multiple primary colas And she was react very well: 1:🌳 Flowers are very dense , also after the dry and cure process The aroma of smoke after my first pitch from a joint, obviously weed-only, reminded me a lot of Amsterdam The bluberry taste is the first thing you feel, and it's clear and clean Afterwards there are notes of earth and something similar to citrus on a sweet base The effect is enough for the day because it keeps you motivated and creative too But if you sit on the sofa and close your eyes, you can clearly feel a tingling on the forehead halfway between one eye and the other 🧠👁️ And the imagination is facilitated, expanding the creative process For this reason it could be vaguely psychedelic I personally love it I want to spend two words about post-harvest artistic process😉 Personally I have spent more time figuring out the best way to have the tastiest, smoothest, cleanest and most perfect burning weed. First I just want to say one thing... ..WEED SHOULD NOT SMELL DURING THE DRY PROCESS.. If this happens, it means that the temperature and humidity are too high and probably the fans are aimed directly at the inflorescences The scent that is felt are all terpenes that are dispersing in the air and which consequently will be less intense during final consumption The less trichomes remain in contact with air, the better If too exposed to air and light, these oxidize, thus removing much of the final experience Personally, what interests me most is the taste, because it already creates the effect in itself A bit like when you sit down to eat I prefer a well-cared for dish with quality ingredients that leave me a great memory after consuming it, rather than a dish that only fills my stomach Mc Donald weed vs Five star restaurant . Sorry Mc lovers 🍔🍟🙌 Said this.. My method is that the cannabis is dried whole plant for a maximum of five days at constant and balanced temperature and humidity, the important thing is to maintain a narrow range between te ur, 20 ° or 24 ° C little changes, even if humidity remains between 55 and 60% is fine The increase in temperature must also correspond to an increase in humidity And so also in case of a decrease In any case In the first few days it must lose most of its water 💧 When the branches are about to break, but still not cracking, I cut the branches one by one and perform a professional manicure Afterwards, always with the flowers still attached to the branches, I put everything inside a classic brown bread bag (not white because it is colored and not the best) For about two days I leave the buds inside, opening the bag several times a day to circulate air and to move the branches with the flowers After a couple of days, the inflorescences usually have reached a good level of drying and are dense to the touch, but by pressing, you still have to be able to crush between the fingers Explaining in words how hard they can be pressed to find out if the ur level is optimal is difficult to say It is must necessary to try and make mistakes many times And never be satisfied You can always do better 😎: 1:💪 So, now we are about ten days after the cut of the plant and, at this point, the flowers can be placed in an airtight container BASIC The flowers are put in the vase "a moment before" that the branches break cleanly, this is important An optimal method to understand when the right time is is to see if the popcorn buds are easily detached from the branch, without dragging with them the "thread" of the bark Once placed in the pot, normally I leave it closed for 24h in order to let the moisture come out from the central area of ​​the flower and distribute it evenly After this first day, I start to open and close the pot several times a day, but always for a few seconds At each opening I always move the flowers to allow a correct exposure to the little air present in the vase The jars would be better not to fill them completely, but just a 3/4 or a little more The important thing is that the flowers can move easily enough This process generally lasts about four weeks, and every seven days I decrease the number of daily openings Usually, after the first week, the scents that will be created begin to be felt And this makes us realize that we are on the right track 🛣️🚀 After four weeks, if everything has been done in a workmanlike manner, the perfume will be pungent and intoxicating and the flowers will be dense and oily to the touch When the humidity level appears optimal, I insert a bag from the Boveda series to keep the ur around 62% In all cases, I personally start using my flowers constantly two months after cutting 📆 I noticed that in general, Haze-type Sativas are tasty even after only a month For the Kush the optimal terpene profile I appreciate it in the neglect only after a couple of months In this way the flowers will be extremely fragrant, crunchy and smooth in flavor once consumed and always create a clear oil all around the rolling papers As you can appreciate in the videos what place, and that I hope to be able to post for much longer every time I conclude a new cycle You need to savor a lot of cannabis in order to have a clear idea of ​​how a high quality finished product should look 🔥👌 This is my thought about our true works for having the best , I hope it can be useful 😉 About the Living Soil with my High-Brix formula Like I say week by week , for this lady I have use a 20l geotextile pot with around 1/3 of the Living Soil I have made ( in this case in november 2019 ) First thing to say is Trought this metodology we're not feeding the plants , but the soil ☝️ Basycally the important things are principaly four Soil energy Cation exchange Microbial activity Mineral balance Soil energy is kept high with humus Cation exchange with rock powders Microbial activity is achieved with innoculants and some teas or other Mineral balance is achieved by adding the micronutes and having everything in the right ratio's For doing this I have use a base mostly of light-mix soil with already perlite inside ( classic cannabis soil ) coco nut humus zeolite then I have add Neem soil , Kelp , Krill , Azomite , Basalt , Gypsum , Calcium Carbonate , Phosforite , Alfalfa and Leonardite Then I was have "cooking" it for a month an half And this was the engine that allowed the plant to stay in constant health, keeping the Brix level high 🌳🔥 During the flowering time I have add mostly only water , one times a week with molasses for feeding the microbs I have also make a humus/nutrient tea for she and her sisters , just one time I'm feel good doing in this way , like it and I understand so many more things about the lives into the ground in general But just for be precis.. For having the high brix in plants we must need obviously a good soil with a right nutrition way, but we have also to maintain the environment around her in the best condition Temperature , ur , right water dosage in right time , good ventilation and fresh air The balance it's the key Like in our daylife 🙂 And obviously a fundamental it's First , the right strain selection from serious breeder 🏆🔥 Second , passion&love 💚 (Don't look for them in a growshop) So, I think I said it all I apologize for this long review But I wanted to explain the best of the things that personally took the quality of my cannabis to a higher level Thanks for everybody stopping by here in this few months or just now for the first time🙏 Thanks Barney's farm for create this and more strain 🤝 And like as always thanks the people behind Grow diaries for maintaine this creativity space👏🙌👉💪🏅 Hope you was enjoy Or at least , hope you are stoned like me right now 😁 See you somewhere Always growing 🌲 Looking for a clouds ☁️ Ciao ✌️ 🇮🇹 FC