me encantaría escuchar sugerencia de mas gente con mas experiencia y consejos, espero os guste y muy buenos humos a todos

The plants are growing like and hell and some plants more than others. I therefore have to super-crop the plants, which is a method promoted by SOMA from SOMA-Seeds. I take the stem of the plant at appr. 20 cm under the top, directly above an internode, and squeeze it hard between my fingers. So hard that I can feel the fibers brake inside the stem. I squeeze in a circle around the whole stem and then bend the stem sidewards until the whole top of the plant is bent 90 degrees to the side or even points downwards. This way I dont have to top the plants and save the big top buds. The stem will heal and the plant will continue to grow, just at a lower height. I use this method since many years and it works GREAT. The BIO-TABs nutrients still do thier job VERY WELL, all plants have a healthy green color. The SANlight EVO4-120 LED-lamps are still hung at 75 cm distance from the top of the pants and do an OUTSTANDING JOB.

8/31: I fed today..8 gallons split between the 15 plants. Now that the 3 autos are out of the closet, they've all got a little more elbow room. 9/1: Lotsa frost and aromas now.. 9/4: Fed today, rotated edge plants, plucked off some yellow and dead leaves, and sniffed them up really well..😋 I started germinating the next batch of beans today, so these bitches need to get busy... 9/6: One of the FFT4's is starting to ripen up and show some senescence, and one of them is showing some potassium deficiency... I'm switching over to Cha Ching and will be reducing the dosage of ONE at the next feed. I lowered the lights to be at about 12" on the taller ones and 14" on the shorter ones shooting for maximum PAR for a few days...they'll either blow up really big or burn up really bad 😬

All the girls are almost ready for harvest,I won't get much but it will sure be above my expectations!happy growing,!stay high!

Buds are hardening but not getting much bigger, 0 vertical growth. Leaf tip burn so diluted the nutrients. Funny little plant.

Heute ging es rund. Der Massive Busch wurde ausgedünnt und gelollipoppt. Das Netz habe ich ca. 5 cm höher gemacht.

Letzte woche für die damen.😋 Bin echt zufrieden mit diesen run. Für die hitze die ich hatte und den kleinen stickstoff problem. Super zufrieden bis jetzt. Hoffe sie haben potenz das es mich auf meinen arsch sitzt

Booom!

chopped #1 on 1/21/25 started curing today 1/27/25 chopped #5 on 1/23/25 still hanging and drying. will update with weights and smoke reports and more pictures when dried and cured #1 33 grams. nice big nugs. i really like how the mainline turned out with the final product #5 32 grams smaller buds overall but the yeild is very similar. these are weights after trimming. i did a fairly heavy trim on thesr 2 plants. this diary started with 5 plants but because of my perpetual flowering set up, i have had 3 other diaries for the flowering stages of the other 3. The flowering stage of this diary are only plant #1 and plant #5

The plants look a bit damaged and need some care as I was on holiday for a couple of weeks. They have been watered every 2-3 days but have not received any further care, despite this they have grown quite a bit. Durban Poison is the first to start flowering. Frisian Dew wants to continue growing skywards, I think the story of the beans growing up to the sky will soon have to be rewritten. I will then hire a ladder to measure the size of the Frisian Dew. The Shaman and the Frisian Dew are about to start flowering in the second week of August. The Shaman in the garden has had a huge growth spurt. Shaman in pot 147 cm Shaman in garden 180 cm Frisian Dew in pot 230 cm Frisian Dew in garden 190 cm Durban Poison flowering 160 cm

Update 29/8/2021 Nothing much going on last couple of day's today the pots ran dry again so i've watered them and gave new nutrients. some leaves still start to turn yellow but i'm just leaving them as they go now. 1 plants is still not really showing any progress in growth.. the 2 others slowly seem to grow. Update 1/9/2021 Hey Folks, again not much action this week. picking some dead leaves left and right. but thats it. Really starting to think that 1 plant is lost. it doesn't show any more growth. we are slowly getting closer to the finish line. and man do i want to finish this.. and start a new cycle with all the knowledge I have now.😎 stay safe🙏

60x60 cm tent in a 1920's peek-in-closet Oversized vent for silence High power DIY LED True SoG 12/12 from seed with 15 plants in 2L pots Watering all plants in bottom tray with 30% of total pot size (10L) WEEK 1 DAY 1 - Germinated in paper towel DAY 3 - Planted into pots + Lights ON at 125w DAY 5 - All plants have broken soil DAY 7 - Slight stretch - Light at 185w WEEK 2 Two of the Iced Out are lagging behind, others are on point - I'm trying to push light and nutes to the max. Extraction fan (AC infinity Cloudline T6) on level 2. DAY 13 - First full watering (10L) with 20 ml Canna Terra Vega DAY 14 - Circulation fan turned on (low) during lights on WEEK 3 Good growth, two Iced Out still lagging DAY 18 - Light at 225w, Extraction fan on level 3 during lights on DAY 20 - 2nd watering, 8L with 30ml Vega + Light at 250w DAY 21 - On point, mostly :) Could've pushed nutes a bit more from the go WEEK 4 DAY 24 - So far this week I'm just kicking back and watching them do their thing. The two lagging Iced Outs are trying to catch up. DAY 26 - Watering 10L with 50 ml Vega (one day too late...) + light on 300w (max) DAY 28 - 4 weeks from popping the seeds, looking good except for the two Iced Outs, one of them is trying to get with the program, the other... Well, some plants are just pricks. WEEK 5 I think this is the week we'll see them take off :) DAY 29 - Plants are starting to show sex, removed 2 Urkle Mints males, the other two are females, the rest are fems so we're down to 13 female plants total with only a single weakling DAY 29 - Watering 8L with 50ml Vega (shouldn't have been later than today!) DAY 33 - plants exploded over the last 4 days and most are stretching and starting to flower DAY 33 - Watering 10L with 60ml Vega (feeding Vega once or twice more then we switch to Flora) DAY 35 - Just cruisin' 😎

Another good week of growth this week. 🌱🙂 The smell is certainly getting stronger changing to a sweeter smell indicating these girls are starting to produce trichomes. More defoliating again this week removing any leafs blocking main bud sites also removing a few of the lower bud sites that will struggle to receive any light. Light still set at 90% power also still rotating the pots every few days to help spread the light as best I can. 🙂✌️

Calmag enter this week, the fruit are more big. Next week im gonna enter the PK from Aptus. One of my plants has a magnesium deficiency I think, I hope that with the calmag it will be fine. The smells are already magnificent, the Glookie looks like a packet of candy! The fruits will start to grow nicely by the weekend with the high PK intake

Well what can i say about this lady. Perfect girl. Super tall structure with great space for light penertration and airflow. Numerous budsites and good things hoped for. No drama to report apart from her height being a bit of a concern.. But a bit of adjusting in the flower room and all is well. Thanks for stopping by. Please take care and grow well..💪👍

This week I added a new controller to handle up to 8 functions. I installed a new heater, my old humidifier and some LED strips to the controller. Targeting a VPD at 1.0 day and night. Trying to keep the nutrient ppm under 900 and ph at 6.0 in the reservoirs. Ordered a second ph pen because I don’t trust my readings. Will be here by Thursday. Friday: Checked the ppm in the reservoirs and it’s at 1,000. Added more RO water with extra nitrogen to bring the ppm level down to 925. Saturday: I installed an updated AC Infinity controller 69 Pro Plus (controls 8 pieces of equipment) which allowed me to add a humidifier, corner LEDs and a heater to the controller. Overall I’m extremely impressed with this AC Infinity equipment. My VPD is within the range I want to achieve (.8-1.1). I programmed it to maintain 78 degrees and 67% humidity during the day, 73 degrees and 63% humidity at night. Charts posted also show the impact of an open tent compared to the closed environment. The heater is constantly pushing fresh air into the tent, so I don’t need to cycle the exhaust fan often. Rewired the tent again and moved the controller later that night. I mounted the controller on the wall. Added Mars Hydro UV/IR lighting to fill out all 8 slots on the controller. Sunday: I checked the ph in the reservoirs (6.8….i had filled it with 6.0 ph) and the ppm (1200 ppm…I had filled it with 900). So evaporation and possibly a mismeasurement of ph. I topped ff reservoirs with slightly stronger nutes and adjusted ph to 5.8 in the reservoirs. Poor magnesium absorption could be driving some leaf yellowing. Effective tomorrow, I’m switching over to Heads Formula which consistently feeds GH Flora series nutes at Micro (6ml/g), Bloom (9ml/g) and cal mag (3ml/g). Turned on the UV/IR lights for 3 minutes every 8 hours. I’m easing the plants up to 5 minutes every 6 hours which will provide the recommended 20 minutes of IR per day. This will help the plants stretch a little more. Monday: checked ph and ppm in reservoirs. 6.1ph and 880ppm. VPD remains stable except when I open the tent. Tuesday: checked ph (6.4) and ppm (880) in reservoirs. Added .5ml of ph down to two reservoirs. Still see slight yellowing between the veins but it’s not getting worse (might be improving). Adjusting ph down to 6.0 target might have solved this. The plants grew by 1-2” last night…..is the infrared light working already? Decided to mix up fresh nutes for the reservoirs following Heads formula. 6ml Micro and 9ml Bloom per gallon of RO water. Added 5 ml of CalMag too. Ending ppm was 1080 which is too high, so I diluted down to 880 with RO water. 6.0 ph. Wednesday: plants grew another .75 inches last night. I topped above the 5th node. Thursday: added RO water with heavy cal mag to reservoirs to increase amount of CalMag available.