Likes
Comments
Share
Likes
52
Share
Flattened canopy a little by bending and gently cropping stems over several days. Dropped hours of light to 16 and switched to a spectrum more suited to flowers. Will give her one more week to prepare and develop. INFINITY Dodecahedron is the only platonic solids that has infinite numerical pathways. The Aether. Saturday I switched to 12, I forgot for a second this strain is 100% Sativa, I thought she wouldn't stretch much because the PPFD was high. Never noticed such an obvious change in temperament from a plant overnight, it has been a sleepy, lazy leaf veg cycle for the most part, there are no signs of flowers yet ofc, but just the way she exploded into a more satellite disciplined formation, ITS TIME, so it begins, no turning back now....... my poor electricity bill.
Likes
51
Share
@Waveform
Follow
Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …
Processing
Likes
21
Share
@Bawzs
Follow
Heloooh So this sour tangie is starting to grow realy nicely, it seems that it recoverd good from their transplantation. it's got small branches popping up everywhere . witch will be nice when i start putting them under my hid that's arriving soon. I gave it some alga grow and not seeing burning on the leave's so will probably continue this. Happy with my grow so far let's hope these plants grow big in flowering, they got a nice base so far. Greetings Bawzs
Likes
68
Share
@Theia
Follow
All goes well I guess.. I don't think there will be time for her to finish.. 6 weeks more at least and nights getting colder... Can't do much but wait. She grows she stinks.. really stinks.. That's all really. Thanks for stopping by Stay safe 😷😷 Grow well 🌿🌱🌼
Likes
20
Share
Gracias al equipo de Royal Queen Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁Punch Pie: Un híbrido monstruoso con un 90% de dominancia índica, ocupa uno de los primeros puestos de la lista de favoritas de Kid Dynamite. La Punch Pie desciende de la Cherry Punch Pie de Tyson 2.0 y contiene la genética de dos índicas galardonadas: la Purple Punch y la Purple Kush. Punch Pie tu paladar se impregnará con ricas notas de pastel de frutos rojos, repostería caramelizada y tierra. Luego, pocos minutos después de la primera calada, sentirás todo el poder de este portento. La Punch Pie proporciona un combo 1-2 que se manifiesta justo en medio de los ojos y derrite todo el cuerpo, dejándote en un estado somnoliento, hambriento y apacible. Produce plantas compactas que alcanzan una altura de 80-110cm en interior y hasta 120-150cm en exterior. Tras 9 semanas de floración, esta señorita robusta crece con fuerza para soportar el peso de sus densas flores, y da cosechas de hasta 600g/m² en interior y 750g por planta en exterior bajo el sol. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS- 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 3: Muy buena semana, he aplicado un riego solamente con agua de manantial para reducir la cantidad de sales acumuladas en el sustrato y se ha notado una mejoria . Creo que le quedan unas dos semanas por estirar, parece que va a ser una buena cosecha. Se mantiene un buen control del cuarto de cultivo gracias a @marshydro y @trolmaster. Mantengo las dosis de 1/3 de nutrientes recomendados por el fabricante. Potencia del foco 80%
Likes
27
Share
5/30/2023 Week 8- Day 1 of Flower (Day 117 overall) So two of the buds in the back fell over, it was definitely because they are getting heavy, I had to pick them up and tuck them in to the net to help support them they were so covered in Resin that I had to use Rubbing alcohol to clean my hand was so super sticky from touching the bud will have to use gloves from now on if I need to touch the buds. Other than that I sat back and got to watch the ladies grow. 5/31/2023 Week 8- Day 2 of Flower (Day 118 overall) Just watched them grow today.. :-) 6/1/2023 Week 8- Day 3 of Flower (Day 119 overall) I noticed on two of the bigger Fan leaves small signs of Calcium Deficiency so I fixed my Chart to up the Cal mag from .5 to .75 for the water change on Saturday. Other than that I let them keep growing on Auto Pilot, frost is everywhere including all the way ont the Big fan leaves this strain is super Frosty... 6/2/2023 Week 8- Day 4 of Flower (Day 120 overall) Auto Pilot engaged today.. Growers Hands stayed away just looked and apricated the beautiful buds that are forming. Tomorrow Water Change day! 6/3/2023 Week 8- Day 5 of Flower (Day 121 overall) There were a couple of sucker buds right up front today so of course I had to get rid of them. Other than that Water Change Day.. Drained and reset the system. Since I am taking this to 10 weeks Week 7 and Week 8 Nutes repeat. I took a couple of shots looking up for those that like stem action. I added 36 gallons Mammoth Silica = .5Mil/Gal= 18Mil Root DRIP = 1Mil/Gal= 36Mil CalMag= .5Mil/Gal= 18Mil FloraMicro = 3.8Mil/Gal= 137Mil FloraGro= 2.8Mil/Gal= 100Mil FLoraBloom= 4.6Mil/Gal= 166Mil LiquidKoolBloom= 2.5Mil/Gal= 90Mil TPS SIGNAL= 4.0Mil/Gal= 144Mil ORCA = .5Mil/Gal= 18Mil Water Temp= 71.2 Tent Temp= 76 6/3/2023 Week 8- Day 6 of Flower (Day 122 overall) Auto Pilot.. I did nothing but look in and enjoy the beautiful ladies. 6/4/2023 Week 8- Day 7 of Flower (Day 123 overall) Auto Pilot Day 2.. Just watched them be beautiful.. I did want to get a picture of where they stems meet to make an arch I thought it looked really cool and would be a fun pic. I also wanted to focus on the color differences between the two. I am amazed between this lightside/darkside, yen/yang, thing going on in the tent.. Plant #2 is decidedly bright green, like more light with hints of yellow throughout, and plant #3 leaves are getting darker and it has hints of purple coming in throughout the buds. It really is an amazing and fun contrast especially with the name Yoda Soda to have a type of light side/ dark side theme going on with the Two plants.
Likes
4
Share
@Lato33
Follow
3rd week of flower ,didn't let me select 3 so i had to put week 4
Likes
79
Share
И это всё FastBuds! 😜В этот цикл у моих автоцветов случился полный рассинхрон. Вы только посмотрите👆 - лимонад вымахал выше метра(что еще раз доказывает, что в ограниченном пространстве нужно применять техники по сдерживанию роста), и уже сформировал красивые одуваны, также цветет 20:1. У cbd crack пока нет даже намека на цветение. Самое позднее время зацветания автоцвета в моей практике - на 53день, посмотрим, будет ли побит рекорд. Хоть и не хочется, но видимо придется перейти на раздельное питание. А пока сделал перестановку, и теперь смог согнуть лимонад, надеюсь его рост прекратился. Т.к. в дальнейшем лазить в бокс будет уж проблематично, таки подсоединил фильтр(еще цикл без замены угля😱). Включил боковой досвет. Ах да, в начале недели лимонад проявил фиолетовый фено, вот так резко, прямо на глазах в течении дня. Спасибо, что заглянули, и будьте здоровы! 🙏 Продолжение следует...😶
Likes
3
Share
Likes
3
Share
Likes
12
Share
She has spread very nicely after the LST and now there will be few big collars. She is growing nicely and the buds will get bigger
Likes
9
Share
Vamos familia, acabamos ya está 3 semana de floración , que bien vamos con este proyecto, vaya color que tienen y cómo se están formando las flores. Os recuerdo que les hice limpieza y posiblemente acabe defoliándola alguna semana más adelante. Es una variedad bastante rápida entre los 57/63 días estará lista. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 25 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/65% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.
Likes
Comments
Share
🌱 Hey growmies and plant lovers! 🌱 Here we are at Week 1 – Day 7 with the 2 beautiful Papaya Sherbet from Fastbuds 🍹✨ 👉 After germination, they went straight into their medium with a touch of Dynomyco to boost root development and help them settle in strong from the very beginning 🌱⚡️ One week later, both seedlings are looking healthy and happy, showing nice early growth and vigor 💪🌿 🔄 The journey has just begun, and I’m excited to see how they’ll develop over the next weeks 🚀
Processing
Likes
19
Share
Hi everyone :-) This week she was repotted, just like the other Wonder Pie Phenotype from the GHSC Cup in the other diary :-). I am excited to see how it will develop with canna bio in contrast to Grennhouse Feeding 😊👏🏻. I wish you all a nice weekend, stay healthy 🙏🏻 and let it grow 👏🏻😎