Here’s my flowering cycle I was going off the color of the hairs when figuring they were finish.

Week 6 - Bolt 3 (Flower Week 3) Sangria - by Twenty20 Mendocino 4Q 2022 Veg Week 4: Wednesday 01 February - Tuesday 07 February 2023 Start of Veg - 1 Node Start of Week: [ 2022-02-08, SA20 43:B3:6:1] End of Week: [ 2023-02-14, SA20 49:B3:6:7] HeightWeekStart: [ 10.5, in] HeightWeekEnd: [ TBD, in] Start Date: 28.12.2022 # Seeds Wet Harvest Window: 17 - 27 March 2023, 79 - 89 Days EnvironmentGermination - LightDistance: [ 14.5, in] - LightStrength: [934, 505, µmol/m2/s] - Temp: [ 79, 85, °F] - RH: [ 73, pct] - HumidifierTrigger: [ 66, %] Fertigation (BioAg, Mammoth-P) - [x] R&R/Recalibrate BluMat’s at next IDEAL pot moisture Wednesday 08 February 2023 SA20 43:B3:6:1 - Added 1 Pt surface watering. Pot significantly lighter. No bottom heft. - High Humidity and low temps have been a challenge this week, trying to keep VPD above 0.80 kPa - Looking less droopy, but not uproariously happy, yet. __________________________ Wednesday 08 February 2023 SA20 43:B3:6:1  1056 02.08.2023 - Added 1 Pt surface watering. Pot significantly lighter. No bottom heft. - High Humidity and low temps have been a challenge this week, trying to keep VPD above 0.80 kPa - Looking less droopy, but not uproariously happy, yet. - Foliar: [ CalMag Fuel, 20, ml, gal], [ Lush Green, 5 ml, gal], [ Photosynthesis Plus, 6, ml, gal] - What a Day! Humidity over the charts. - Looking REAL Droopy. Mixed up 1 Pt w/ Ful-Power, SLF-100, PhotoSynthesis Plus. Top sprayed in pot. - Pot has weight but no unbalanced heft. - Calibrated BluMat, Drip/Stop, + 2pts on Carrot And 5 hours later  1554 02.08.2023 __________________________ Thursday 09 February 2023 SA20 44:B3:6:2 - Plants aren’t praying, SLOWLY coming out of Droop.Look A little more lift than yesterday. - 0928 Raised humidifier 1 F to 63% - 1407 “ “ 64% - VPD 1.1+, want to be in the 1.0 range Friday 10 February 2023 SA30 45:B3: Saturday 11 February 2023 SA20 46:B3:6:4 - HumidifierTrigger: 66%, up Sunday 12 February 2023 SA20 47:B3:6:5 - HumidifierTrigger: 71.5%, up - Temp < 85 F Monday 13 February 2023 SA20 48:B3:6:6 Tuesday 14 February 2023 SA20 49:B3:6:7   _____________________ Next week (Nominal Flower 4) Wednesday 15 February 2023 SA20 50:F:7:1

Boy Moby Dick is one tough girl she can and has taken a beating ...Between cold weather ,rain , humidity and just about everything it could get she pushed on ... It is a beautiful plant with lots of red and pink the smell is citrus and earth I can not wait to harvest her ...dinafem has some bomb genetics and I can't wait to get this harvest started and my next bean from them going as well ...cheers and thanks canna family hit up my Instagram for lots of pictures @cannibal19888

12 grad am tag, 7 in der nacht, halte die zelte die ganze zeit zu. anscheinend passt das auch, sehen noch gut aus 👍

last 2 plants...the one with lst did 92grams...the other one made 82 grams really enjoyed my first lst , will definetely make all my plants lst from now on grand total .. 588grams dried bud from 8 plants at my first indoor grow

Just had to cut some fan leafs off and try to get her in some kind of shape before she start to get some hight. Cut some bigger yellow leafs off too.

Aloha Freunde der Sonne 😊 Die Tage vergehen und die Damen wachsen prächtig vor sich hin. Immer noch die Höhe der Mädels angleichen auch wenn mal was abbricht 😅 Viel Spaß

Lemon pie 2weeks and OG auto 1 weeks

Was supposed to update my diaries yesterday but literally forgot lol #edibles but they’re flowering nicely and stretching as they go! They’re truly loving life under the ts1000 can’t wait to see what the next week brings!

Estas dos semanas de pre flora vino muy bien con los fertilizantes y riegos foliares de pre flora , en esta semana vamos a hacer las últimas podas de bajos y defoliar las últimas hojas satélites para que reciban la mejor cantidad de luz posible , vamos a ir viendo como sigue

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

I continue to see yellow leaves and cannot figure out the root of it. I can't tell if its a nutrient deficiency or a PH issue, if the nutrients that I add do no suffice then I will go get some PH down, as my soil PH is slightly high at 7.0, but I would not believe that could be the cause of it, only time will tell. To end on a more positive note, even with some yellow leaves some of these plants are bursting with life, and starting the 3rd week with some monster leaves for such a young plant. *UPDATE* We are now currently near the end of the weeks and the plants are beginning to truly thrive with some nice stalks and an explosion of colas. The yellowing seemed to stop now that I give it a regular supply of nutrients, also trimmed off any excessively yellow leaves. I did some very light pruning as well to allow more light to the newer colas and may have accidentally topped to runt plant way too early haha whoops so lets just hope for the best for the little guy.

She is growing healthy and strong...

NEW BOX: 130x60x120 DIY: storage shelf, solid sheet metal ELECTRO ################################ thermometer top thermometer bottom hydrometer wlan ip cam (+ir filter) ---------------------------------------------------------------- input: x2 USB PC fan exhaust: x2 USB PC fan circulation: x2 USB fan ---------------------------------------------------------------- led panel 1: 300W ASUNDOM LED (Veg/Bloom/Full) led panel 2: 300W XHGrow Reflector-Series LED (Full) ---------------------------------------------------------------- studio light 1 (vegetation): 36W TaoTronics LED Gold studio light 1 (vegetation): 50W Balai LED full studio light 2 (vegetation): 8W VINGO LED blue ligh studio light 2 (vegetation): 50W Balai LED full ---------------------------------------------------------------- studio light 1 (bloom): 36W TaoTronics LED Green studio light 1 (bloom): 36W TaoTronics LED Gold studio light 1 (bloom): 50W JADIDIS LED IR full studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W KINGBO LED Deep red 660nm 4x PLANTS ############################### FastBuds Girl Scout Cookies pots: 14L soil: plagron grow mix

Week 20: Flowering Week 3 – Lollipopping, Climate Control & Heavy Water Intake 🌸🌸 Relax! Hey, it's Week 20—Flowering Week 3 is officially underway! We are entering the final stretch of the stretch phase, and the canopy is looking dense, lush, and super active. The Screen of Green (ScrOG) net, which was installed at the start of Week 18, is doing an amazing job keeping everything level and evenly spread out across the tent. Environment & Climate Adjustment 🌡️💧 With the massive canopy and high transpiration, humidity started spiking. To keep the environment safe and prevent any mold risks in this critical phase, we installed a dedicated A/C unit with a dehumidification function. Day Temperatures: Ranging steadily between 21 °C and 27 °C. Relative Humidity: Kept under control between 54 % and 78 %. Plant Training & Maintenance ✂️ Lollipopping & Defoliation: This week, we performed a thorough lower-canopy trim (Lollipopping) in the main tent. Removing the weak lower growth ensures the plants divert 100% of their energy to the top sites. Combined with regular defoliation, airflow through the ScrOG net is top-tier. Canopy Height: Total plant height is sitting right around 1.40 m (including our 30–35 cm pots). Light Distance: The lights are dialed in at roughly 40 cm from the canopy. Strains Progress 🌿 High Society: Absolute monster growth! It has reached impressive height and filled its section of the ScrOG screen completely. Zupernova: Catching up nicely, building compact and dense bud sites across the screen. Side Tent (Mothers): In the neighboring tent, the two mother plants are chilling under reduced light, growing slowly and steadily at a manageable pace. Feeding & Watering 💧 Water consumption has surged massively this week—the plants are drinking non-stop! Total Volume: We are currently going through roughly 100 Liters of plain water per week, plus an additional 20 to 40 Liters (2–4 10L watering cans) mixed with nutrients. pH & Stability: After a short temporary fix with citric acid (which drifted up to pH 7.5 after settling), we are back to a rock-solid, stable setup using phosphoric acid to keep our water dialed in at a steady pH 6.5. Nutrient Mix: The flowering tents are receiving Hesi Bloom Complex, Root Complex, and SuperFit to keep up with the heavy demand during this key phase. Everything is primed for the buds to stack up over the coming weeks! Stay tuned and see you all next week! 🚀

Still only gave them rain water. Time to let them go dry and start the feeding

Really good genetics.A sativa strain that can handle so much cold enviroment and produce so many flowers in 6L pot!😃😁😌

9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this