Likes
Comments
Share
@ValtripOG
Follow
They are already drying to cure and smoke the best Terpz I have it ever
Likes
3
Share
9. Woche Der eine Pheno ist wesentlich schneller als der andere, bin gespannt, wie lange es bei dem noch dauert, sonst sehen beide soweit gut aus 😃
Likes
18
Share
week intel: its time to harvest some of plants the ones that is mature enough. indica dominant plants will done first always so we should harvest them first because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. indica dominant plants will get done 1 or 2 weeks sooner than sativa dominant plants that will often takes more than 8 weeks so be aware to harvest them sooner. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.
Likes
2
Share
Oh Lawd she comin! Lol. She absolutely REEKS of lemons, fresh fruit, and skunk. I really can't wait to smoke this turkey!
Likes
Comments
Share
@DonEspas
Follow
Nous sommes maintenant à la 4 ème semaine et pour nous proche du passage box de floraison 🌺 Arrosage TCO cette semaine Topping de la plupart des apex de chaque branche Soin des coupures avec la cannelle Installation du filet de LST Les orties les plus vigoureux ont été tordu pour ralentir leur croissance et faciliter l'installation u plant de canna
Likes
5
Share
I've added a video review about this strain, and here's the information about Beary White from mephistogenetics.com: -Beary white is a medium sized variety, she doesn't veg for too long before rapidly entering the flowering phase. She has a nice balance of resin coverage on both leaves and flowers. Flowers grow nicely compact and the quality is great. She is a lovely all-rounder in many aspects. -Effect - Strong, Happy, relaxed, but not too inda-couch. -Medicinal Benefits - Great strain for pain and stress relief. Thank you so much for the seeds to grow this great tasting strain. @MephistoGenetics #MephistoGenetics | October 2017000
Likes
26
Share
Likes
Comments
Share
Had a bit of rainfall(blessing) as u can see other than that so far so good nothing to complain about nugs are forming lovely aroma is getting loud...could be from the previous crop I had in the ground they are closer to the end of their cycle (15) of them rest got water damage/nute burn (200+)snip a glimpse in the second vid.... I haven't included my nute cause most of it ain't recognize on here only the urea, down to earth fish bone meal and langbeinite.. the rest is jus my foliar mixture according to their
Likes
14
Share
@AndrewC
Follow
This week, I tried to LST them in the beginning of the week, but the stalks were flimsy and weak. I put a fan on them with a significantly more vigorous wind :) This helped, then I tried to LST train with my bending clips, the distance between the nodes was still to close. So I raised the light 2 inches, which helped, I figure by 2-3 days from now, I will be able to start the proper LST. I also flushed the res and put in new water and nutrients. Some of the plants are showing what appears to be Cal/mag deficiency. So I added an increased dosing into the res, I then took about 10ml of the mix and put it into the small res's at the bottom of the AutoPots to give a boosted dose to the plants directly. Other than that, this grow is *boomin*. I'm very happy with the progress, and these plants are thick, bushy and growing like crazy.
Processing
Likes
21
Share
@RIZZY
Follow
Everything was fine, until I split the main stem persay, trying to lst. Advice would be appreciated"
Likes
24
Share
@BunnyBud
Follow
31 Aug. I start the third week of my autoflower. The plant is growing well, but I noticed small yellow spots on the leaf tips, which seem like a mild calcium deficiency. This is probably due to the fact that so far I have been giving water with a slightly low pH, around 6, while the ideal range would be 6.5–7. At the beginning, to lower the ppm of the tap water (which was around 211 ppm), I mixed it with demineralized water. This brought the ppm down to about 109–140, making it harder for the plant to absorb the available calcium. Additionally, the soil I am using, Biobizz Light Mix, is lightly fertilized but does not contain enough calcium to correct this small initial deficiency. For this week, I will not add any fertilizers. I simply want to raise the pH to 6.5 and use water with higher ppm, so the plant can better absorb the nutrients already present in the soil. The lamp is positioned about 35–36 cm from the plant and so far there are no burn issues. Temperatures range between 25 and 30 °C depending on the day, while humidity in the room stays between 40–60%. The humidifier is always on because I keep the window open, but the dehumidifier is not being used, as it is not necessary at the moment. I also have a new oscillating fan arriving to replace the current fixed one, and I’m waiting for a regulable extractor (90–145 m³/h), which will allow me to control the air perfectly during winter if needed. This week my main goals are: Increase the water ppm without overdoing it Adjust the pH to 6.5 Keep observing the plant without adding any fertilizers Everything else seems fine and growth is regular. With these corrections, I expect the new leaves to grow healthy and free of spots. ==UPDATE 31/08== To control the calcium deficiency, I will administer an eggshell solution until I reach 300 ppm (I will boil some eggshells and administer the solution in tap water). ==Update 4 Sept== By mistake, I adjusted the pH twice, once to 7 and once to 8, and obviously the plant immediately showed symptoms of incorrect pH. At the next watering, I'll give Biobizz Grow with a little Biobizz Bloom since the plant has entered pre-flowering. I'll adjust everything to a pH of 6-7 and a ppm of 450-500.
Likes
7
Share
@Dabking
Follow
Started out great as a seedling. On week 3 things I used cheap clips that jacked things up and after a certain amount of time passed I decided to transplant it to Fox Farms Strawberry fields soil where it quickly went into flower shortly after. I chopped 77 days after planting the seed. It produced 47 grams dry of amazing flower. The smell is incredibly pungent -sweet and citrus scent. The high is great as well. After drying for 8 days they were then thrown into a grove bag for an infinite cure until consumed.
Likes
11
Share
Hello Guys, Hope you are doing good. It's time ! Harvest time ! I'm very happy, it was a good and very interesting grow. You can find all the details of the harvest into my tutorial video. No problem except sticky fingers ! but that's good problem. I will keep using the nutrients until finishing it and then I will try their bio product to compare. I tried a new things for the harvest as currently it's summer time and it's very humid, I read that you should let your plant dry into her pot for around 1 week so it's what I did after flushing. You can see that the fan leaves was already very low so you can tell that the plant enterred into drying with the minimum of water. I don't know if it's saved my harvest but I haven't got any issue during the drying. Take care all Sawyer
Likes
7
Share
@3rnest
Follow
Leider habe ich noch nicht das optimale Setup gefunden, da die Pflanzen nach meinem Geschmack noch etwas zu klein sind und die Blätter sich zu früh verfärben. Ich habe sie diese Woche noch mal gut gegossen und den pH-Wert etwas erhöht. Ich hoffe sie legen jetzt noch etwas zu und wachsen etwas besser.
Likes
4
Share
Super sticky frosty buds😬🔥👊🏻
Likes
13
Share
¡Buenos vibras y excelente humos para todos! Regresamos al cultivo y vamos a probar 6 automáticas de MrHide Seeds. Lámpara: Bestva Quantum Led 2000W Semillas: 4 Auto Kritical Red , 1 Auto Triping 25 , 1 Cream Mass Nutrientes Canna: Vega - Rhizotonic - Camnazym. Sustrato 1:2 Floragard - Jiffy fino para semilleros Germinó directa en sustrato 🔥👈 NOTA: La lámpara que utilizo y el banco de semillas no está entre las opciones de Growdiaries.
Likes
17
Share
For the most part it was an easy plant to grow, it started yellowing though before it was ready. But overall gorgeous plant.
Likes
25
Share
This plant was a pleasure to grow, with cola buds dense and encrusted, and a problem free first grow. Seem to have gotten an OG dominant pheno with nice gelato hints of flavor and color; the citrus zest may or may not come out in the finished product, for me it is faint. Hope to grow this strain again in the future, definitely head-stash potential so my remaining steeds will be going in the vault. I let it hang dry a bit too long, but they’re currently a week into the cure at about 59% RH. My next grow will probably be the same set up, but improving on it with the experience I’ve gained through this process. I hit my 10 Oz total yield goal I’m pretty satisfied with my techniques and strain choice. Get this strain if you want an easy, high potency indica with impressive yields and good flavor. I’ll also be dry sifting the (tons of) sugar covered trim from both of the plants to press into resin, so I encourage y’all to take advantage of all that the plant provides. Cheers