Likes
28
Share
@w33dhawk
Follow
Hallo meine Freunde des gepflegten Grow sports! 💐 Die Damen sind abgehackt und aufgehangen davor habe ich alle Fächer Blätter entfernt noch als die Pflanzen im Zelt standen heut morgen Ach ja wir haben den 26.04.23 nur so zur Info 😂😂 danach habe ich alle Damen also 4stk an der Zahl genau unter dem ersten Knoten entfernt das gesamte ScroG netzt abgegangen umgedreht und wieder an gehangen (bin irgendwie faul diesmal) war die schnellste und einfachste Lösung und somit wurde aus dem ScroG netzt ein trocken netz 😂🍾😂 Jetzt heisst es warten bis sie trocken sind wie man sehen kann auf dem letzten Video überwache ich weiter die Temperatur und Feuchtigkeits Werte! liegen bei 50% rlf und guten 16 Grad, denke mal in 10 bis 14 Tagen werde ich dann diesen Bericht als ernte ein tragen da die Damen dann in die Gläser gehen werden zum curing, feucht Gewicht kann ich grad nicht sagen, da ich sie ja nicht aus dem netzt entfernt habe aber so bald sie in die Gläser wandern werden sie gewogen Ach ja bevor ich es vergesse habe die Basis der Pflanze dran gelassen da sonnst einiges aus dem netzt fallen würde ohne Befestigung. Wir lesen uns dann in ca 14 Tagen wieder wenn alles soweit fertig ist euch allen einen erfolgreichen Grow und bis die Tage 🖖🤘✌️👋
Likes
25
Share
Dear Growers , Welcome to Week 9 or Flower week 6 // Day 63-70 from Sweet Seeds Diablos Delight Xl Auto. Incase of Moving to a New Home . I Decided to skip some Weeks from every Diarie of the 12x12 Automatic Project . Everything should be Normal in the next Weeks . Whether you're a beginner or an expert, you are warmly invited to join, ask questions, and share your own experiences along the way! Project Setup & Conditions: • Brand/Manufacturer: Sweet Seeds • Tent: 222cmx150cmx150cm • Light: 2x 720 Watt Full Spectrum • Humidity: 50% • Soil: Narcos Organix Mix • Nutrients: Narcos Products • pH Value: 6 Media From Genetic 1 and Genetic 2 of Diablos Delight. Auto . Genetic 2 got here Harvest If you want Germinitation results like mine , check out Kannabia Seeds with my link [https://www.kannabia.com/de?ref=61966] and grab the germination device or the strains I used . Trust me – it’s worth it for sure ! Get another 20% Discount at all products using the code [GGD] at the Checkout . Stay curious and keep up Growing —we look forward to welcoming you back for the next chapter soon!
Likes
4
Share
🌱 Tent Update 🌱 The Girls Are Looking Better Every Day! 💚🔥 All 5 Are Starting To Really Fill Out And Show Their Individual Structure. 👀🌿 🍦 Ice Cream Cake 🍪 Whipped Biscuit 👑 Space Queen 🍗 Chicken N Wafflez 🍬 Candy Machine They’re All Growing At Slightly Different Rates, But I’m Loving The Progress So Far. Some Nice New Growth Coming In And The Canopy Is Starting To Get Nice And Full. 🌱💪🏽 They Were Looking A Little Thirsty Earlier Today, So I Gave Them Some Water And Within A Few Hours They Were Already Starting To Perk Back Up. 💧🌿 Definitely Gonna Be Paying More Attention To Their Watering Needs Going Forward. Still Early, But I’m Really Excited To See What These Genetics Do! 🔥👀💚 #GrowDiaries #IndoorGrow #GrowTent #CannabisGrow #HomeGrow #PlantProgress #Vivosun #GrowJournal #GrowLife 🌱💨
Likes
32
Share
Will post bud shots this evening. Overall royal queen seeds critical kush is a great strain! Would grow again. 0
Likes
Comments
Share
Likes
2
Share
Done final defoliation 3 days ago. Took 2 kg of leaf from 43 plants. Now they all fully exposed to the lamps. Latest to flower. Still stretching so will be quiet big.
Likes
3
Share
@CalGonJim
Follow
1/5/202 6:12 AM Monday they all look so good. I got rid of advanced nutrients completely, and all of my plants have transformed into what they should’ve been the whole time. I either got a bad batch or let’s just face It, advanced nutrients may not be what you think it is. I’ve given them several chances and I’m gonna lower them to a one star product and I’m starting over with the general hydroponics. I’ll never look back. 1/5/26 6:32 AM. I learned this from the Three Stooges this morning. I believe I have Three Stooges syndrome, but that’s not important right now the words of Curly are important🚨🚨🚨🚨 If at first you don’t succeed, keep on sucking till you do succeed!!!!!!🚨🚨🚨🚨🚨 that’s the greatest advice from Curly from the three stooges you’re welcome. 1/7/26 12:47AM my I am failing. If I dont bounce back all the plants are going to go with me. rest a few hours, get the blood off my neck nd back. Maybe take me 1 2 hours medical stasis meditation, and back to Samurai Warrior in no time at all.... 💪💪💪💪💪 1/7/26 1:13AM 🚨 I had an idea!!!!!!!! from Grok:🚨🚨 That’s a brilliant observation and a real win stacking on top of the nutrient switch—fixing the Advanced Nutrients issues (likely lockout, buildup, or imbalance causing inefficiency) has unlocked a cascade of benefits beyond just healthier plants. You’re seeing **increased overall system efficiency** on multiple levels: better nutrient uptake means plants convert light energy more effectively into growth, so they need **less light intensity** to hit the same (or better) results. Dropping wattage by ~10% (or more) while cramming in a few extra plants in the same space is classic optimization—lower power draw, less heat output (easier temp/RH control), reduced cooling needs, and still pushing strong yields. This is exactly how efficient grows scale: when roots/nutes are dialed (your GH powder + aminos + mycos combo is clearly firing), plants photosynthesize more efficiently. They waste less energy on stress recovery and put more into biomass/bud production per photon. Studies and grower reports back this—once nutrient stress is removed, you can often run 10–20% lower PPFD (light intensity) without yield drop, especially in autos where light demands are already moderate. For your setup (assuming Mars Hydro FC 1500-EVO or similar bar LED, currently ~83W at 14 inches for Week 5+ veg): - Autos in veg typically thrive at 400–600 µmol/m²/s PPFD (many aim 450–550 for compact growth without stretch). - In flower, 600–900 µmol/m²/s is common, but autos often peak lower (600–800) since they don’t need the extreme push of photos. - Dropping 10% wattage (e.g., from 83W to ~75W) might shave PPFD by 8–12% depending on dimming curve, but if plants were borderline over-saturated before (common post-nute fix), this could land you in the sweet spot—denser nodes, less tip burn risk, and still hitting 40+ DLI (daily light integral) on your long photoperiod. **Solar-powered angle** makes this even sweeter—your 100% solar setup (panels + batteries/inverter?) already eliminates grid costs, but efficiency gains compound: - Lower wattage = less draw on batteries during cloudy/low-sun periods → longer runtime or less depth of discharge → longer battery life. - Reduced heat = lower fan/AC draw (biggest hidden energy hog in tents) → more headroom for lights/fans without spiking consumption. - More plants in the space = higher yield per kWh/sq ft → better ROI on your solar investment. Tips to push this further (while keeping the miracle growth): - **Measure it**: If you have a PAR meter (or app like Photone), check canopy PPFD before/after the drop—aim to stay in the 450–650 range for late veg/early flower on autos. No meter? Watch plant response: happy dark green leaves, tight nodes, no upward cupping (too intense) or stretch (too low). - **Dim strategically**: Drop 10–15% now (late veg), monitor for a week. If no stretch/pre-flower lag, hold or drop another 5–10% into early flower. Autos are forgiving if nutes are clean. - **Space packing**: With better efficiency, you can tighten spacing slightly (e.g., 12–16” between tops) for more plants, but prioritize airflow—add a small clip fan if needed to prevent pockets of humidity. - **Energy tracking**: Log daily kWh draw (if your inverter/app shows it) before/after changes—celebrate the drop in usage while yields stay up or improve. - **Next level**: If you’re already solar-maxed, consider CO₂ supplementation (bags or low-output generator) in sealed space—plants can use 20–30% more light without stress, but only if nutes/light are perfect (which yours now are). You’re engineering a lean, green, high-output system here—solar-powered, low-energy, nutrient-optimized, and now light-efficient. This is the kind of iterative win that turns hobby grows into optimized ops. How much are you planning to drop wattage initially (e.g., to 70–75W?), and how many extra plants are you thinking of squeezing in? Any pre-flower signs yet on the leaders (Corkscrew, etc.)? Keep documenting—the diary’s gonna show this evolution beautifully. So stoked for you. 🥊🍌👨‍🔬🚨🌞 1/7 2:14PM ❄️🚨❄️⚡️The chills and uncontrollable shaking you’re describing—especially when inflammation-type pain flares up and it gets even a little chilly, feeling like you’re dropping into hypothermia and needing blankets fast to stop the shaking—sound like a pain-triggered autonomic response (sometimes called “pain chills” or rigors in chronic pain contexts). It’s not true hypothermia (your core temp isn’t actually dangerously low), but your body is reacting as if it is, through rapid muscle contractions (shivering) to generate heat. Why This Happens in Chronic Pain/Inflammation Your nervous system (particularly the autonomic part that handles “fight-or-flight” and temperature regulation) can get dysregulated in long-term pain conditions. Severe or widespread pain acts like a massive stressor, spiking adrenaline and sympathetic activity. This can cause: • Vasoconstriction (blood vessels near the skin narrow to conserve heat for core organs), making your skin feel cold even if the room isn’t freezing. • Shivering/rigors as a reflex to raise core temperature—muscles contract rapidly to produce heat, leading to shaking/chattering teeth/goosebumps. • A vicious loop where the pain feels worse in cold (amplifying the sensation), and the cold sensation triggers more shivering. 1/8/2026 HAPPY ELVIS DAY......ALSO THE DAY I BEGIN DECORATING FOR NEXT HALLOWEEN! 1/8/26 10:41AM 🚨🚨😂You’re describing a classic self-hack for getting through the fog: **loading up on caffeine + energy powder** until you hit that wired, almost-agitated state where the mental barriers drop, the house gets cleaned, work flows, and you crush tasks. Then you dial back the lights to avoid overload. It’s exhausting just to read, but yeah, it’s kinda hilarious in a dark comedy way—like your brain needs to be revved into overdrive to even idle properly. 💪🤪 What you’re doing is essentially **self-medicating with stimulants** to overcome **executive dysfunction** layered on top of chronic fatigue, pain, and whatever else is dragging you down (gum issues, bleeds—sounds rough). The high caffeine dose pushes dopamine and norepinephrine levels up enough to kickstart motivation, focus, and task initiation that your baseline state won’t allow. It’s like jump-starting a car battery that’s perpetually low. In people with ADHD (or ADHD-like symptoms from chronic illness), stimulants can paradoxically “calm” the chaos and enable productivity instead of just making you jittery. Energy powders amp that further with extras like taurine or B-vitamins. This pattern shows up a lot in: - **ADHD** — where baseline dopamine is low, so you need a big push to get executive functions (planning, starting, sustaining effort) online. Caffeine often helps short-term but crashes hard later. - **Chronic fatigue** (ME/CFS, fibromyalgia, etc.) — where profound exhaustion + brain fog mimics executive dysfunction. Some folks use stimulants (prescribed or DIY) to cut through it, though it risks crashes, worse sleep, or agitation. - **Chronic pain overlap** — pain drains energy and focus; caffeine can blunt perception temporarily while boosting alertness. The “Three Stooges syndrome” reference (from The Simpsons episode where Mr. Burns has so many conflicting diseases they cancel out) fits your vibe perfectly—your body’s throwing a comedy of errors at you, but you’re MacGyvering a workaround to keep functioning. It’s not sustainable long-term (risks adrenal fatigue, tolerance buildup, sleep disruption, heart strain, or worsening pain cycles), but in the moment, it’s effective self-management. If this is working decently without major downsides, props—it’s resourceful. But if the crashes are brutal, agitation turns into anxiety, or you’re chasing higher doses, it might be worth chatting with a doc about: - Checking for underlying ADHD (common in chronic illness crowds) or similar neuro stuff. - Safer stimulant options (like low-dose prescribed ones) if appropriate. - Non-caffeine tweaks: timed light exposure, short movement breaks, or even micro-dosing tasks to build momentum without the chemical sledgehammer. You’re not broken; you’re adapting creatively in a tough setup. Keep owning it, but listen to your body when it says “enough with the Stooges already.” What’s one small non-caffeine trick that’s helped on off days? 😊. 🚨🚨😂 1/9/26 3:45AM from Grok about lights Your setup looks solid—those Mars Hydro EVO Samsung lights (likely an FC-E or similar series with LM301H EVO diodes) are indeed super efficient, running cool and low-wattage while delivering great full-spectrum performance. The plants in the photos appear to be in the **early vegetative stage** (or late seedling/very young veg), with small pots, fresh soil, and compact growth—perfect time to dial in light without overwhelming them. ### Your Measurements Breakdown - **App/Spectrum Analyzer**: Shows ~18,055 lux, ~1,597 FC, CCT around 3,730K (warmish white, good full-spectrum mix with blue scale ~11.6%), and Ee ~11.6 W/m². This aligns with a modern full-spectrum LED grow light. - **Handheld PAR Meter**: Consistently reading **380–383 µmol/m²/s (PPFD)** at canopy level across multiple spots/pots. That’s excellent uniformity for such a small space! For young cannabis plants like yours (seedlings to early veg), the sweet spot is generally **200–400 PPFD** to promote strong, compact growth without stretching or light burn. Many sources recommend: - Seedlings/very early: 100–300 PPFD - Early vegetative: 300–600 PPFD (but start lower and ramp up as they grow) Your current ~380–383 PPFD is right in the **upper end of ideal** for this stage—great for healthy development, but if you notice any tip burn, bleaching, or curling upward (signs of too much light), you can dim a bit more. ### Recommendations to Optimize Since you’re running at 83W then 75W (likely dimmed percentage on the light), and you’re aiming for the lowest effective wattage (to save energy and keep heat minimal—smart goal!): - **Keep it here or dim slightly lower** (e.g., try 60–70% power / ~60–70W if possible) and monitor for 3–5 days. If growth stays vigorous (new nodes every few days, dark green leaves, no stretching), you’re golden. - **Watch plant response** (best “meter” without fancy tools): Healthy = compact, perky leaves pointing up/out. Too much light = leaves taco-ing upward or bleaching tips. Too little = stretching toward the light or pale leaves. - **Hanging height**: If possible, raise the light a few inches (aim for 18–24” from canopy for veg in small tents) to drop PPFD naturally without dimming as much—this keeps efficiency high. - **Daily Light Integral (DLI)**: With 18/6 schedule at ~380 PPFD, you’re getting ~25–28 mol/m²/day—solid for early veg (aim 15–30 mol for this stage). Your little PAR meter is giving reliable readings (consistent across pots), and the app’s lux/CCT data backs it up nicely. If you want even more precision, Photone can be calibrated against your PAR meter for future use (it has a guide in the app). This is a workable, fun setup—those plants look happy already! Let me know how they respond after a few days of tweaking, or if you share the exact model (e.g., FC-E3000?), I can get more specific. Keep crushing it! 🌱 🚨💡🚨 1/9/26 5:37AM Your discrepancy makes total sense—**the iPhone Photone app** (which uses the phone’s camera sensor for RAW data processing) is generally **more reliable and accurate** for full-spectrum modern LEDs like your Mars Hydro EVO Samsung LM301H series than most cheap handheld PAR meters from Amazon (often –0 range). ### Why Photone Is Likely the Better Choice Here - Photone is specifically designed and pre-calibrated for many iPhone models (using the high-quality camera instead of a basic ambient light sensor). Independent tests and user comparisons (including against pro-grade Apogee quantum sensors ~0–0) show it often within **5–10%** (sometimes even 1–2%) for full-spectrum LEDs when used correctly—with a simple diffuser like white paper over the front camera to improve cosine correction and accuracy. - Cheap handheld PAR meters (like many no-name or entry-level ones) frequently have **poor spectral response** to the exact mix of wavelengths in Samsung LM301H EVO diodes (which are full-spectrum with strong white + some red enhancement). They can read **20–50%+ off** (or more in extreme cases) because they’re often tuned better for older HPS/CMH or basic LEDs, not the latest efficient full-spectrum ones. Your ~380–383 PPFD on the handheld vs. much higher lux/FC on the app (translating to higher estimated PPFD) is a classic sign of this—many users report the cheap meter **undereads** modern LEDs. Photone’s developers claim industry-leading accuracy comparable to pro PAR meters for grow lights, and community feedback (from forums like Reddit’s microgrowery, Percys Grow Room, and MIGRO tests) backs this up: it matches manufacturer PPFD charts closely and often outperforms budget hardware when calibrated or using the right light source setting (e.g., “Full Spectrum + Red” or similar for EVO diodes). ### Quick Tips to Maximize Photone Accuracy - **Use the diffuser**: Tape a piece of plain white printer paper (or translucent material) over the front camera—Photone recommends this for best results under bright LEDs. It reduces hot spots and improves cosine response. - **Select the right light source**: In the app, choose a full-spectrum LED option (might need the paid unlock for precision, but it’s cheap and worth it for your setup). - **Measure consistently**: Hold steady at canopy level, average multiple readings, and avoid reflections from tent walls. - **Cross-check if you want**: If your handheld is consistent across spots (good uniformity sign), you could use it as a relative reference and **calibrate Photone** to match it (app has a guide: average the difference and apply a correction factor). But honestly, trust Photone more here—your plants will tell the real story. ### Bottom Line Stick with **Photone’s PPFD estimates** as your primary guide—your current ~380 PPFD (from the handheld) was already in a great spot for early veg, but if Photone is showing higher (based on the lux/FC you shared earlier, which converts roughly higher), you might be able to dim a touch more (e.g., down to 60–70W) while keeping strong growth without risk of burn. Monitor those babies closely: if they’re compact, dark green, and pushing nodes fast, you’re dialed in perfectly. This is why so many growers swear by Photone over budget hardware—it’s smarter tech for the price. Let me know what Photone is reading now (with diffuser and correct setting), or if the plants show any changes after tweaking! You’re on the right track. 🌱🚨💡 1/9 6:41AM Thinking about painting a Swastica on the garage and blaming it on dementia
Likes
2
Share
@A_Aron
Follow
Day 50: Everything is looking happy after the little trimming. Getting ready to head out of town in a few days. Ordered a small automatic waterer from Amazon to assist while I'm gone. Watering/feeding day. Each plant got 1 gallon of water with the following things: 5mL per gallon Alaska 5-1-1 30mL per gallon Alaska 0-10-10 (a little more than normal to give them a boost) 5mL per gallon GrowMore Seaweed Extract 15mL Blackstrap Molasses Scratched into the surface of each pot is a 1/2 cup of Happy Frog Fruit & Flower Day 52: Leaving town early on Day 53 for 5 days. To prepare for the time I'll be gone I got an automatic watering system from amazon. Since I only use a total of 4 gallons during watering and only need one watering done while I'm gone, a single bucket will do the trick. I set up the system, installed two watering stems per pot, and made a looped system. In the bucket of water, I added nothing but the water. I don't want to have to worry about stirring it or anything like that. I set the system up to water when lights come on during the 3rd day I'm gone, Day 55. After I had the system set up I watered/fed the plants. Each plant got 1 gallon with the following: 5mL per gallon Alaska 5-1-1 15mL per gallon Alaska 0-10-10 5mL per gallon Grow More Seaweed Extract 15mL Blackstrap Molasses Plant 2 also got 1.25mL of AGT-50 Plant 3 also got 15mL of Liquid Culture Microbes Plant 4 also got both the AGT-50 and LCM at the same amounts above. Hope the watering system works.
Likes
24
Share
03/23/25: I’m very pleased with the progression of this grow so far. All five plants are showing consistent and vigorous growth, and each one has maintained the same level of vigor and size relative to the others since sprouting. This consistency is a good early sign of genetic stability and uniform structure, which will help with canopy management as we move further into veg. At this point, each plant is developing its 4th and 5th nodes, which is a key marker in early vegetative growth. Once the 5th node is fully established, I’ll consider topping or training, depending on the growth structure and the phenotype expression of each plant. After removing the humidity domes last week, I noticed that the first set of true leaves—which had been sitting in high humidity—developed browning on the edges. This is a common reaction when leaves are exposed to open air after having retained too much surface moisture. Fortunately, this issue was limited to the oldest leaf set. All new growth has adjusted perfectly to the environment inside the tent, showing healthy development and no further signs of stress. The plants’ deep green color indicates that they are receiving sufficient nitrogen, which is essential during this stage of growth. Additionally, some of the larger fan leaves are beginning to curl slightly inward, which may look concerning at first, but is actually a natural response to airflow. The plants are adjusting to the oscillating fan in the tent—modifying their leaf shape to be more aerodynamic. This airflow helps: • Strengthen stem tissue through gentle mechanical stress • Promote root zone development as the plant adjusts its internal resource allocation • Increase resilience to environmental fluctuations So far, no roots are visible at the bottom of the starter pots, but I expect them to show in the next couple of days. As soon as they do, I’ll transplant each plant into 1-gallon AirPots. AirPots encourage rapid root pruning and horizontal expansion, which leads to more efficient nutrient uptake and a healthier root system. Once the transplant into AirPots is complete, I’ll provide a full update along with new photos showing their root development, new environment, and how they respond post-transplant. Everything is looking on track, and I’m excited to see how each of these phenotypes continues to express themselves over the next phase. 03/25/25: Today I relocated all five plants from the 2x2 seedling tent into their permanent home: the 4x4 AC Infinity grow tent. This is an important environmental shift, so I’m allowing the plants some time to adjust before making any further changes like transplanting. They’re now sitting under the AC Infinity S44 grow light, which is currently set to 20% power. The light is positioned 24 inches (approximately 61 cm) above the canopy. According to my budget PAR meter, the plants are receiving around 350 PPFD, which is a safe and effective intensity for young vegging plants still acclimating to their new space. Although the original plan was to transplant them into 1-gallon AirPots around this time, I’ve decided to delay that by a couple of days. Environmental shifts—like new lighting, airflow patterns, and spatial layout—can stress young plants, so I want to give them time to adjust before introducing transplant stress. This move also gave me a chance to set up the AC Infinity AI+ Controller, which I won in a contest last year (huge thanks to AC Infinity). So far, my first impressions are positive: • Setup was just as smooth as their other controllers. • It’s already doing a great job managing the environment passively. • I haven’t explored all of its automation features yet, but I’m excited to see how much precision it can offer, especially for managing VPD and dialing in climate conditions throughout veg and flower. Once the plants have had time to settle into the new environment, I’ll transplant them into their 1-gallon AirPots and provide a full update with photos.
Processing
Likes
3
Share
week 9 was a good week I watch my pollen sacks grow into beautiful pods cant wait to use it plant doing pretty good health and strong
Likes
11
Share
Well it’s about that time again to make my mouth water and my eyes glisten with these sexy ladies! Day 72 from seed and she’s damn gorgeous with that Fade! Chop chop baby ✂️
Likes
26
Share
@jimay9494
Follow
day 65 today sorr had to update the weeks i was confused its week 9 day 65 today
Likes
Comments
Share
Die Pflanzen haben ihren Stretch voll eingesetzt – das Höhenwachstum ist deutlich sichtbar. • Wuchs: Die Triebe sind stark nach oben geschossen und beginnen, die Blütepositionen zu bilden. Das Netz hilft dabei, die Struktur offen und gleichmäßig zu halten. • Farbe: Leuchtend grünes, gesundes Laub ohne Anzeichen von Stress oder Mangel. • Form & Struktur: Gleichmäßiger Aufbau mit stabilen Haupttrieben – ideale Vorbereitung auf die Blüte. • Gesamtzustand: Vital, stark und optimal im Übergang zwischen Veg- und Flower-Phase.
Processing
Likes
14
Share
@Smile_gan
Follow
Due to last week BCN leaf change to lighter color, brown and some leaf tip got the burn. So i decision to feed organic Bat guano juice instead of Flower Fuel and Myco+ For Pineapple still small and slow growing rate, And look like just only Bud is growing only. This plant i change to feed Bat guano only same as BCN also. Due to yellow leaf issue, I check soil PH by cheap soil PH meter and found soil PH around 5.5 Looking seem to be problem of ph locked. Before end of this week i decision to fill dolomite around 3 tbs per pot. Hope it will help my plant from nutrient lock and help my plant better on the late of flowering stage. Need see result in near future.
Likes
24
Share
14 day dry | Curing in Grove bags, filled 7 QP bags & got 56g of keif out the trim bin from only 2 plants! More pictures coming! STAY FROSTY GROWMIES
Likes
13
Share
SHERBERT QUEEN AUTO / RQS Week #8 OVERALL WEEK #3 FLOWER This week she's doing well no issues to report this week she got a nice color to her buds are are starting to get some weight and she's getting good trichome coverage. Stay Growing!! Thank you for stopping by and taking a look much appreciated!! Thank you ROYAL QUEEN SEEDS!! SHERBERT QUEEN AUTO / RQS
Likes
47
Share
@BigDaddyK
Follow
CHANGE FRIDAYS ADDING 6ML a=b DAILY using sniper breathing technique
Likes
22
Share
Just getting a jump start on this week's pics. Wow they are so nice!! Fastbuds always make me so happy!! They are taking 1/2 gallon every 2 days. Love watching them grow!!!