14/05: EC: 1,23 PH: 5,22 Removed all LST hooks 15/05: EC: 1,15 PH: 5,92 16/05: Added Nuts EC: 1,3 PH: 6,08 17/05: EC: 1,3 PH: 6,1 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 Lesson Learned: AS SOON AS THE MAIN BUDS RAISE UP MOVE THE LAMP ON THE CEILING TO AVOID BURNS 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 18/05: Changed Grow Box SetUp . I had burning lights problem and I moved the lamps on the grow box ceiling EC: 1,42 PH: 5,99 19/05: EC: 1,25 PH: 5,46 20/05: EC: 1,25 PH: 6,03

The demo clips show how the nutrient and air supply are being delivered to the root zone. After the flooding of the root zone to the top of the container, the pump turns "off" and the nutrient solution simply drains back down the supply pipe and out of the pump intake, which in effect, has now has become the outlet :)

Die letzte Woche hat angefangen. In 5 Tagen werde ich sie 2 Tage Komplett im Dunkeln lassen. Ich freue mich schon auf das Ergebnis 🤤

FC-E 4800 lamp , to view this lamp or any other marshydro product go to: https://instagram.com/marshydro_aliexpress?igshid=YmMyMTA2M2Y=

Day 1 of week 9 in flower. I took some close up pictures of trichomes yesterday they are at the end of week 12. Judging the looks of the trichomes I can go longer before flush/ harvest. The buds are slowly adding weight. The plant smells great I am happy with the progress. I will be lowering my center light down to 15cm for the last 10 day push. Early in veg the plant has a Indica look to it and its leaves. Late in flower the leaves look more Sativa. Friday May 14th I will check trichomes tomorrow which is the end of week 9 in flower. End of week 9 trichomes are getting there. One more week will be 10 weeks in flower the estimated flowering time. Video for comparison tomorrow first day of week 10. Buds are defiantly gaining size as branches bend from their weight.

06/03/19 - These plants have grown so fast, normally at this stage my previous plants have been much smaller, only 14 days old and got a 8-9 wingspan on the fan leaves, I’m really happy I’ve turned to mills as I’ve had no faults with them yet, I did see a slight cal defiency on one of them but this was my own fault not the nutrients, I heard I dident have to add cal mag as their A&B had extra in it, but as I’m in coco I made a mistake but I’m hopeing that it’s gonna be a quick fix and they will be back to normal in the next few days 🤞🏻 09/03/19 - the gelatos seem like their doing fine, had a few brown specs but nothing progressed and it looks like their doing good. 12/03/19 - started to LST/leaf braid today as their already big enough for it and should be switching to flower at the end of next week

MAGIC STRAIN This strain easy to grow and beautiful to look at. Nice colour, incredible taste, great smell. This strain takes well to LST. Made a few mistakes, but the bud came out great overall. Very pleased and will grow again.

.

She grows with ease she doesn't need extra attention all she needs is feed and light

the week went we'll they grow by the day. I fed them sillica , Alaska fertilizer and molasses. there not showing many hair yet one is a little. I topped one of the plants the larger one. the gentics are top notice .i think there vigger is amazing. lots of structure should yield well

You don't become confident by shouting affirmations in the mirror, but by having a stack of undeniable proof that you are who you say you are, outwork your self-doubt. Nitrogen fixation is a chemical process by which molecular nitrogen (N2), which has a strong triple covalent bond, is converted into ammonia (NH3) or related nitrogenous compounds, typically in soil or aquatic systems but also in industry. The nitrogen in air is molecular dinitrogen, a relatively nonreactive molecule that is metabolically useless to all but a few microorganisms. Biological nitrogen fixation or diazotrophy is an important microbe-mediated process that converts dinitrogen (N2) gas to ammonia (NH3) using the nitrogenase protein complex (Nif).[2][3] Nitrogen fixation is essential to life because fixed inorganic nitrogen compounds are required for the biosynthesis of all nitrogen-containing organic compounds, such as amino acids and proteins, nucleoside triphosphates and nucleic acids. As part of the nitrogen cycle, it is essential for agriculture and the manufacture of fertilizer. It is also, indirectly, relevant to the manufacture of all nitrogen chemical compounds, which include some explosives, pharmaceuticals, and dyes. Nitrogen fixation is carried out naturally in soil by microorganisms termed diazotrophs that include bacteria, such as Azotobacter, and archaea. Some nitrogen-fixing bacteria have symbiotic relationships with plant groups, especially legumes.[4] Looser non-symbiotic relationships between diazotrophs and plants are often referred to as associative, as seen in nitrogen fixation on rice roots. Nitrogen fixation occurs between some termites and fungi.[5] It occurs naturally in the air by means of NOx production by lightning.[6][7] All biological reactions involving the process of nitrogen fixation are catalyzed by enzymes called nitrogenases.[8] These enzymes contain iron, often with a second metal, usually molybdenum but sometimes vanadium. Green clover (Fixation) White clover (Fixation) Red Clover. (Fixation) Yellow Clover. (Fixation, deeper roots) Sweet Thai Basil. (Terpenes) Italian Basil. (Terpenes) Chamomile.(Oil production) Borage.(Pest attraction taste) Lavender.(Pest attraction smell) Marigold(Pest attraction visual) Mycorrhizae are beneficial associations between mycorrhizal fungi and a plant’s root system. Mycorrhizal fungi spores germinate in the soil, creating filaments (hyphae) that penetrate the root cells, thus establishing a symbiotic relationship. This collaboration leads to the development of both intra-radical and extra-radical networks of filaments, enabling efficient exploration of the soil for enhanced access to nutrients and water. Consequently, these vital resources are transferred to the plant, resulting in numerous benefits for crop cultivation. Various mycorrhizal products are available in diverse formulations (powder, granular, and liquid), concentrations, and qualities. Ongoing advancements in products, technologies, and research are reshaping our understanding of mycorrhizae. Despite these positive developments, certain misconceptions persist. In the following discussion, we aim to clarify the truths and dispel the myths surrounding mycorrhizae products. MYTH #1 A HIGHER NUMBER OF MYCORRHIZAE SPECIES MEANS BETTER RESULTS. Contrary to common belief, having a higher number of mycorrhizae species in a product does not translate to better results; in fact, it often yields the opposite outcome. A plant can sustain only one association with a particular mycorrhizal fungi species. Introducing multiple species creates competition among them, which is not advantageous for the plant. The initial colonizer does not ensure the highest success; instead, it gains precedence. It is recommended to select a product with a concentrated presence of a single mycorrhizae species known for its effective performance, rather than opting for a product with multiple species at lower concentrations. MYTH #2 ECTOMYCORRHIZAE ARE EFFECTIVE FOR CANNABIS PLANTS. Although ectomycorrhizae can colonize five to ten percent of plant species, cannabis is not among them. Ectomycorrhizae do not penetrate the root cells; instead, they develop around the roots and on the exterior. For cannabis plants, it is essential to seek out endomycorrhizae. Endomycorrhizae are capable of colonizing 70% to 90% of plant species, including cannabis. Unlike ectomycorrhizae, endomycorrhizae penetrate the root cells, forming structures like arbuscules for the exchange of nutrients and water with the plant. MYTH #3 WHOLE INOCULANT (PROPAGULES) PERFORM BETTER THAN ONLY VIABLE SPORES. The propagule count specified on most mycorrhizae products indicates the presence of spores (viable and unviable), hyphae, and root fragments. However, it is crucial to note that only viable spores, those with the capacity to germinate, can successfully colonize a plant’s root system. Spores are to mycorrhizal fungi what seeds are to cannabis plants—a fundamental component enabling fungi reproduction. Consequently, even if a mycorrhizal product boasts millions of propagules, its effectiveness hinges on the presence of viable spores. Without viable spores, the product will not contribute to plant development. Therefore, the genuine value of a mycorrhizal inoculant lies in the quantity of viable spores it contains, as only viable spores can efficiently initiate symbiosis. MYTH #4 ALL METHODS OF APPLICATION YIELD IDENTICAL RESULTS. To establish the symbiosis, mycorrhizal fungi spores must be close to the plant roots. The optimal recommendation is to directly apply mycorrhizal inoculant to the roots, either in powder, granular or slurry form. This method ensures maximum proximity between the spores and the roots, facilitating a rapid establishment of symbiosis. Particularly with crops like cannabis, which have a short growing cycle, employing this technique is the most effective way to obtain optimal benefits. Alternatively, techniques such as blending the inoculant with the soil are effective, but there may be a delay in the establishment of symbiosis. This is because the roots need to grow and come into contact with the dispersed spores throughout the growing media. MYTH #5 MYCORRHIZAE CAN ONLY BE GROWN ON LIVING PLANTS. While the predominant method for commercially producing mycorrhizae involves growing them on the root systems of living plants (in vivo production), it is not the exclusive nor the optimal technique. In fact, this production approach has notable drawbacks that the “root organ culture” method just does not have (in vitro production). In vitro production occurs in meticulously controlled, aseptic laboratory conditions, allowing for the consistent generation of products that are viable, highly concentrated, species-specific, and free from pathogens. Achieving such precision and quality is impossible when relying on the cultivation of mycorrhizal fungi on plants exposed to external conditions. In conclusion, it is crucial to take all these factors into consideration when choosing the appropriate product for your crop to fully harness the wide array of benefits provided by a high-quality mycorrhizal product. STRONGER PLANT – Stress resistance. FASTER GROWTH – Improve plant structure and shorter veg time. INCREASE YIELD – Overall more biomass. IMPROVED QUALITY – Increase cannabinoids and terpenes content.

Hey good morning Growers hope all is well with everyone and their family and plants Well there’s a lot going on over here at the 48219 Krud Buddy’s Grow House I found out when I transplanted my Wedding cake and Sherbertlato I put them into super soil I feed them twice lightly thank god cause I don’t have any burns or anything n their growing good to me everything is growing good to me way better than the auto flowers I started with but I did some cloning of my own and I’m loving how their taking on as well So here’s what’s going on strain by strain Gorilla Cookies & Peanutbutter Breath : as of Today April 25th they are on day 60 since I got them and have been sitting in the dark since last night for their 24hrs of darkness before flip to flower starting tomorrow morning thinking a good timing would b from 6/6 or 7/7 also I have them under my 600w budget led hanging 12’ above I can’t wait to see how they out and I have them under an scrog net I made Wedding Cake & Peanutbutter Breath: on May 5th it’ll be 60 days since I’ve had them I pretty much told everything bout them at the beginning Grape Pie & Girl Scout Cookies: it’s Been about 3 weeks And I must say they stretched fast their already 15’ tall the grape Pie is spreading faster any of the other clones I got I’m loving it I recently got Cherry Pie & Guava Cake x Cookie it’s bout week one going on two weeks and I must say when I got them I was kinda skeptical about them because they were so weak looking and the cuts on them were terrible but they look like they might turn out into something amazing idk but the pictures show it all as well as the clones I cut myself in clear plastic cups ands their on their second week of life I noticed roots on the 10th and put into cups on the 11th if I’m not mistaken I’m not around my chart so I’m not for sure but everything is going swell over here to me

🗓️ WEEK 8 / DAY 50-56 ⚡ Light: 55 cm / 150 watt; ⌛ Schedule: 18/6; 🌡️ 24.5° C - 65% RH average; 📑 PH 6 - EC 1.5; 🌱 She's very fine, has a beautiful green color and drinks about 1 LT/day! ⚙️ Fan, extractor and pump ON 24/0. No humidifier.

🌫️🌫️🌫️ 🌬️🌫️The end🌫️ 🌫️🌫️🌫️

******** Week 3 of flower, Week 12 growth - Oct 3 to 9/20 *********** It has been less exciting this week with respect to new issues👍😃 Leaves are getting a little darker for my liking this week. It is one of the things I have often struggled with using AN Sensi Grow and Bloom base nutes.,,,,,,keeping the feeding at 1ml.L to maybe 1.5ml at max.....stopped using their CalMag Basie of nitrogen levels as well. Not sure where else to go and will just give her some time for now and stay the course and see what the next two weeks bring.......keep up, increase, the plain water feedings. Little more detail........ Oct 3/20, Day 15 - 4L watering with CalMag, Rezin @ 2ml, Sensyzime @ 1.5ml - 450ppm and 5.7pH - they look to be stretching a bit. Oct 4/20, Day 16 - 4L feed with Rezin, Terpinator @ 2ml, CalMag, Sensi Bloom, Big Bud, B52, Bud Candy @ 1ml - 1025ppm and 5.8pH - left alone for the most part. - C472 needs some lower branching removed. Oct 5/20, Day 17 - 3L - Vitathrive, Piranha, Microbial Mass @ 1.5ml = 110ppm and 5.9pH - 100ppm and 5.9pH - fair bit of runoff yesterday with 4L so backing down a bit. Oct 7/20, Day 19 - 4L - Rezin, Terpinator @ 2ml, Rhino, Big Bud, B52 @ 1.5ml, CalMag, Sensi Bloom, Bud Candy @ 1ml - 1025ppm and 5.9pH - girls are really frosting up! Bud sites stacking......feeling might be a little slow though???? Oct 9/20, Day 21 - 3L- Rezin @ 2ml, CalMag, B52, Sensi Bloom @ 1ml, - 500ppm and 5.9pH Girls are looking good.....slow though?????