The Grow Awards 2026 🏆
Likes
Comments
Share
Last lap ! This is the biggest plant a grew, def
Processing
Likes
16
Share
@Andres
Follow
I have problems with her. I think it's because of the local water. the earth is not fertilized with any product. only earthworm humis.
Likes
39
Share
Hey growmies, This week was about hands on the plants. The plants are hungry since I switched last week to 12/12. I've been feeding them every other day since it usually takes 2 days for the ppm to drop sufficiently. On the 15th, I've defoliated all the plants and cutted some offshoots that weren't worth it on the Tropicanna. Every day I've been adjusting the lines so they're as even as they can be at the cannopy. Hope next week the 2 photos are alredy flowering Good grows
Likes
12
Share
After a comeback, the train is in the station! Even though I broke the main stem, she was an easy grow. I just basically let her do her with great results. Buds are thick and dense. Time for the drying and curing.
Likes
10
Share
@Byteme
Follow
I think i have a phosphorus Deficiency im trying to fix it by increasing nutrients mostly bloom and big bud. any help would be appreciated
Processing
Likes
13
Share
I'm wanting to replace all my miscellaneous lights with another quantum bar rig before my Fall grow this year. Anybody want to buy some gently used lighting gear this summer???😁😎 👉 2 x 100w Cree CXB3590 (3500k) with pin heatsinks - 3 grows usage 👉 1 x 100w Citizen Clu048 COB (3500k) with pin heatsink - 3 grows usage 👉 1 x 120w DIY quantum board (3000k) 256 x LM301b's - no heatsink - used for 2 grows 👉 1 x 60w Bridgelux COB (3500k) - Par38 style - used for 1 day (a back-up bulb) 👉 1 x Morsen 2000w (367w actual) blurple with a bank of 1/6 of the 200 LEDs not working - used 3 grows 👉 1 x Morsen 2000w (367w actual) blurple with only my current grow in use (the replacement) 👉 1 x HeroLight 1500w (285w actual) 5 x COB full spectrum (pinkish-white) - 2 veg stage uses 👉 4 x 36w Par38 type deep red (660nm) bulbs - 3 grows usage 👉 2 x 25w 225 LED panels (660nm) - 3 grows usage 👉 2 x 25w 225 LED panels (440nm) 4 veg stage uses 👉 2 x 25w 225 LED panels (440nm) 👉 1 x 50w 225 LED panel (6500k+440nm) 👉 1 x 20w Par38 style Cree COB (3000k) - (more like a 40w) - used for a week 👉 1 x 15w Sansi blurple Par38 type bulb - used 1 day only 👉 1 x 40w Sansi 4000k daylight Par38 type bulb - used during germination only 👉 4 x 12w MiracleLED red spectrum (4000k daylight + 700nm red) regular light bulb - used during flowering in 2 grows Just hit me up in chat if you are interested in anything- ============================================ SUNDAY 3/31: I did a little more tweaking on the timers and ventilation. I foliar fed her a few times and rotated her. MONDAY 4/1: I foliar fed her a few times and spun her around, then tweaked the timers a bit more...fingers crossed.. TUESDAY 4/2: I fed her about 1/2 gallon of all the good stuff, and started her on Open Sesame and Tiger Bloom. Increased Terpinator, Bud Candy, and Calimagic, and decreased Grow Big. She's got at least 10 good bud sites and I never even FIM'd her.👍 MONDAY: I spun her around and foliar fed her a few times TUESDAY: I fed her about 3/4 gallon and started her on Open Sesame and Tiger Bloom. Foliar fed a few times and tweaked the timers again.. WEDNESDAY: I foliar fed a few times and rotated her, then took some photos. She's starting to stretch now.👍 THURSDAY: I foliar fed her a few times and rotated her. FRIDAY: I watered her with about a half-gallon including boomerang, bud candy, terpinator, kelp me kelp you, calimagic, and armor si. I foliar fed her several times and rotated her 180 degrees.
Likes
2
Share
This is the last week, I've given them another tank filling, but the Chem Beyond Diesel CBD was chopped on day 69F, which was the second day of the week, SAD CBD, and NYC Diesel CBD followed on day 73F. I left the for a couple more days, but also chopped it on day 76F, which is already the next week, but I won't be creating another diary entry for that one as it was 3 days long and nothing happened. The foxtailing makes it look like there are still a lot of white pistils, but most of the inner/lower ones are finished, the trichomes look ok, and I am growing impatient again.
Likes
2
Share
@Atalant
Follow
9.7 D85 Harvest day✂️ Last flush 10L Water PH 6.5 EC 0.3 Return PH 5.9 EC 3.4 Very high EC of soil. Above 15% amber. Triochoms at top cola start degradation. Defoliation&wet trim. 23inch tall. No training. 121g wet (but now freaking stems and leafs like people do 😂) 32.2g (73% return)
Likes
3
Share
@Miketama
Follow
Quick update on Fractal #2! Defoliated and bent some leaves to prevent moisture buildup. Fed with all three nutrients from the booster pack. Not expecting huge buds - most of this harvest will go towards bubble hash production, and she’s looking perfect for that purpose! Thanks to everyone for checking in! 🙏 Appreciate you taking a look!
Likes
29
Share
Questa Ayahuasca purple ha sofferto molto stress. Spero arrivi a maturazione..,anche lei...è rimasta 3mesi dentro un vasetto da un litro adesso è in un vaso da 7 ma si sta riprendendo bene... Poi dando Advanced nutrient in spray fogliare 2 minuti prima che si spegne la luce è perfetta....sta tornando al suo verde ben vivo😉💪☮️🕉️👍
Likes
2
Share
@SamDo
Follow
Week one of vegetative growth for Pineapple Upside Down – Round 2, from Humboldt Seed Company. I’ll be straight: the start wasn’t smooth, again. Even keeping things “simple,” I managed to stress the seedling early on. The initial mix was tap water with a very light dose of CalMag and a bit of Voodoo Juice, with pH sitting around 5.8–5.9. The coco pellet was fully hydrated, but the plant clearly didn’t like something. It looked like early burn or a harsh reaction, which is frustrating because the input level was low. At that point, the likely causes were pretty classic: maybe the feed was still too rich for a newborn, maybe the dome ran too warm, or maybe the seedling just hates my “light touch” and wants even less. So I did the smartest thing: I stopped guessing and reset. I rehydrated the coco pellet again using only RO water. I dropped EC down to 0.4 and kept it minimal, using just a small amount of FormuleX. No CalMag, no extras, just a clean baseline. Since that change, things look more encouraging. I can see two new pairs of leaves coming in, and that’s the sign I wanted. The seedling is around 5 cm tall right now, and I’ve kept humidity high in the mini greenhouse to support rooting and recovery. The goal for next week is simple: clean new growth. If the new leaves stay healthy, I’ll know the issue was the early mix and not something deeper. And yeah—seedling starts are still my weak spot. I’m clearly making mistakes somewhere in that “first 10 days” window, and I need to tighten the process until it’s repeatable. For now: stable environment, minimal inputs, and steady observation. See you next week. **Quick update on the Pineapple Upside Down Round 2.** I transplanted the plant into its final pot. She’s still a small one, but the roots have clearly started to develop, and she now has four full pairs of leaves. That was enough of a signal for me to move her into the final container without waiting any longer. That said, the start hasn’t been as clean or as smooth as I would have liked. It’s not a perfect takeoff, but it’s clearly not as catastrophic as the previous cycle either. The plant still looks fairly vigorous, which is reassuring at this stage. I’m still running the humidity dome to keep a high level of moisture around the plant during this early phase. The goal is to limit stress as much as possible and help the roots settle properly after the transplant. I mixed a fresh, light nutrient solution. EC is set around 1.0. I’m running Athena Grow A & B, plus a small dose of Cal-Mag. Roughly 0.9 ml per liter for Grow A and Grow B, adjusted to reach that EC. Hopefully, the combination of the transplant and the light nutrient solution won’t slow her down or cause any setback. The focus here is stability, not performance. On the lighting side, I lowered the fixture slightly and reduced the power to stay efficient. PPFD is sitting around 180 at canopy level, which feels appropriate for this early stage. So overall, not a perfect start, but still a workable one. We’ll see how she reacts over the next few days, and I’ll do another update at the end of the week. See you next week. Stay safe, growers.
Likes
9
Share
@AustinRon
Follow
2 Week AC3Q - Seedling Ambassador Cartwright by IRIE Genetics (Clementine X Arise) X Arise ((Tangie X Lemon Skunk) X Arise) X Arise  Start of Week 2 - 16 July 2022 AC3Q 15:S:2:1 to 22 July 2022 AC3Q 22:S:2:7 Environment: EC Targets: # rel. | abs (rel + source) ECseedling: [0.4, 0.5] [ 0.7, 1.0] ECearlyveg: [ 1.1, 1.4] [ 1.4, 1.7] EClateveg: [ 1.2. 1.5] [ 1.5, 1.8] ECearlybloom: [ 1.1. 1.4] [ 1.4, 1.7] EClatebloom: [ 1.3, 1.6] [ 1.6, 1.9] ECripen: [ 0.9, 1.2] [ 1.2, 1.5] ECflush: [ 0.0, 0.0] - Seedling (Week 1-2) - Temp: 78-82°F - VPD: 0.85 ± 0.05 - Photoperiod: 18/6 - Light Strength Start: 200-300 PPFD - EC: 1.0 FertigationFoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 1.25, ml, 500, ml] FertigationFoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 1.25, ml, 500, ml] FertigationFoliarFriday: Solar Wind: [ 2.5, ml, 500, ml] Peak Bloom: [ 0.675, ml, 500, ml] # Cease Begininning Flower Week 5 Rooted Leaf: Primary: # Mix and store for week, not Primer A: [ 2, ml ] Primer B: [ 2, ml ] Silica Skin: [ 1, ml ] # Mix with Base AT Feeding AtFeeding: Root Anchor: [ 1, ml ] # Sprout Lush Green: [ 1, ml ] # at Seedling (3 Nodes) Cal Mag Fuel: [ 1, ml] Sat 16 July 2022 AC3Q 15:S:2:1 - Remaining Plants , 1,3 - 7 (6 Total)    #7 (The Last One) was a potential Lost-Cause - HOWEVER - Her damaged leaflets were praying this morning. It provided sufficient material for Sex Testing.; Sex Testing - [x] Form Filled Out - [x] Clip #3 - [x] Clip #4 - [x] Clip #5 - [x] Clip #6 - [x] Clip #1 - [x] Clip #7 - [x] Package assembled & Mailed (1400) - [x] Install Oscillating Fans (2) - I should have done this LAST WEEK - Wondering why we were growing floppy plants - NEED Light Mechainical (AirFlow) Stimulation to build STRONG MERISTEMS. #6 After Clip  - Mixed up Sat Night/Sunday’s nutes - Full Panel ~ EC: 1.0 Sun 17 July 2022 AC3Q 16:S:2:2 0800: 30 ml full 0.8 EC - Wow - Every time I open the tent after extended close - I’m arrested by the Size change in the leaves. Right now - I see hybrid Vigor! - Installed supports for two leaners, should be ready to come off Wed/Thus ec 0.3 0.4 ml a 0.4 EC + 0.1 0.4 ml b 0.7 EC + -.3 0.2 si 0.7 EC + 0.0 0.2 cm 0.8 EC + 0.1 0.2 lg 0.8 EC + 0.0 2130: 20 Ml Full 0.8 EC - [x] Add Fans to Cabinet for plant strength - [x] Removed supports from 1 & 4 (Flopping Meristem) - Took 6 hours w/ fan for them to stand up! Mon 18 July 2022 AC3Q 17:S:2:3 0900 - 30 Ml Full 0.8 EC 2030: Mixed up Fresh Full @ 1.05 ± 0.05 EC 2100: 30 ml Full Fertigation Tue 19 July 2022 AC3Q 18:S:2:4  0800:30 ml Full EC: 0.8 
 - [ ] Mix up 1.05 ± 0.05 EC FULL 2100 Mixed up Full - EC: 1.05 ± 0.05 Raised ppfd Wed 20 July 2022 AC3Q 19:S:2:5 o730 ec 1.0-1.1, 30 ml per adjusted fans Foliar: - lush green - calmat Thu 21 July 2022 AC3Q 20:S:2:6 - Though fixing’ to harvest - she could use a little water (500 ml) w a littl Rooted Leaf Resin Bloom Fri 22 July 2022 AC3Q 21:S:2:7 Foliar: Solar Rain
Likes
2
Share
Plant is looking good. Probably the best looking in the grow so far IMO. Can’t wait to see her grow out!
Likes
51
Share
Bueno resumiendo cookies gelato es una variedad híbrida muy fácil de cultivar pero ojo, cuidado con los últimos riegos si no queréis perder cosecha por moho. Lo demás de 10 pegada heavy sabor increíble, cogollos duros como rocas y bañados de una gran capa de polen. El ambiente del secado se mantuvo en 23 grados de media y la humedad estuvo por debajo de los 45% en todo momento. Poco más la verdad estuve encantado de poder cultivar una genética tan potente . Un saludazo que paséis un final de año increíble y por supuesto buenos humazooos💨💨💨.
Likes
8
Share
We really like to test the great new products that Zamensia prepares for our growers, this time we have a great plant that we conventionally call Test #3, it is doing well both in the topping version and in the straight version that I will show you in a few days. We have just done the last topping that brings her 16 tops on almost all the plants after which we grow a few more days and off we go. During the topping the use of nitrogen is a very delicate subject. The topping cuts slow down the plant and the leaves tend to grow bigger going a bit in over, it happened to her then you cut off and it tends to discharge now we are at the moment that we are starting to give nitrogen again to then go into flowering. It is a process that must be nuanced very delicately. Ideally it is to start by preparing the soil with fertilizer and add if necessary. I went a bit in excess with the plants but it is something that I have always managed very well once I got to flowering. Next time we will add something to the fertilizer soil with this technique is very suitable. Wait the uncle BreadandBuds.... We are always using soil, feeding and all the recommended additives from Plagron 100% organic, we have only lowered the amount of grow in this topping phase for the reasons mentioned above. ---- Decide on the right soil and calculate your fertilizer sheet based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy.. -------- Strain Coming Soon! Try another Zamnesia Masterpiece instead Zamnesia Description // Strain Coming Soon! Stay Tuned! All the best that mother nature can offer is on ---- www.zamnesia.com
Likes
42
Share
@rhodes68
Follow
Four plants in all eventually 1/31 First of the Bond harvests, Pussy Galore first of the FFT-7s, two more follow. Pussy Dry weight 312 grams 3/5 Holly 665 grams wet into dry - dry 98 grams Two more F7s to go 3/25 Pussy-1 clone yields 1107 grams wet in dry --- dry yield 181 grams One FFT-7 Remains Pussy-2 buds look a bit larger 3/28 Pussy-2 wet weight 1295 grams in dry. 242 grams dry. This concludes the FFT-7 harvests
Likes
19
Share
@RFarm21
Follow
Bom ano novo! Foram alimentadas a 30 dezembro e 6 de janeiro. À espera de encontrar os primeiros tricomas castanhos para começar o flush.
Likes
2
Share
Auto Fractal – Divine Seeds Day 1 above soil 🌱 She broke the surface yesterday and is looking healthy with her first tiny leaves. Pots kept at ~26°C, soil moist but not soaked. Light now on 18/6 to give her a strong start without stretching. Excited to see how this fractal beauty develops in the coming weeks.
Likes
Comments
Share
Buen aumento en el volumen de las flores. Una planta no está tomando agua, revisé y no es botritis, la regaré con agua solamente cuando esté seca . La planta con manchas en la hojas sigue igual , ya ella no se recuperará, no tiene tiempo. Semana con nutriente de floración al 100% y potenciadores. Se cambió de lámpara por otra del doble de potencia 2000W. BESTVA - Luz: Bestva Pro 2000W / 18 h/d -FloraNova Bloom G.Hydroponics: 0.7ml/l - Bio Bud G. Hydroponics 2.5ml/l - Armour SI G. Hydroponics 0.4ml/l - C4 Mills 1ml/l - Everest: 0.5 ml/l Control biológico: -Solution (bioinsecticida generalista: Beauveria, Metarhizium, Lecanicillium y Cladosporium + esencia de ajo y chile). -Acaridox (bioacaricida: Metarhizium e Hirsutella + esencia de canela) - Scamin (control escama y cochinilla) Cladosporium Herbarum -Bioprotection BD Plus (microorganismos bioestimulantes y bioprotectores: Trichoderma + actinomicetos + Lactobacillus) - Bioprotection TR + BSLIN (biofungicida generalista: Bacillus subtilis + Trichoderma y metabolitos).
Likes
13
Share
Removed the 2 Xs 1500's (300watts) & replaced them with 2 P1000 (200watts) lights, now running 680 watts. These lights fit in better & have air space all around to help cool them, these lights run a lot cooler than the xs 1500s & only get warm not hot. Started some clones.