Monday, March 1st. I filled some Claygranules on the Surface of the Eggcups ( 10g of Soil) That keeps them longer Happy I learned alot in these Grows, and its easy now for me, to keep them Happy Plants building nice Flowers and from now on Buds will swell

So impressed with all these amazing colors and terpenes cant wait to smoke! Feeding💪 10/3 Water32L+Rootdrip10ml+Calmag@150ppm Ph6.1 Ebb Repel 9.30/10 Refresh 11.30/14 Average runoff ph6.4 ec2.8 Clone Repel 10.05/10.25/10.50/11.05 Refresh 12.30 10/4 Water34L+Rootdrip10ml+Fultilt50g+ Ec0.8 ph6.2 Ebb Repel 10.15/10.48(3min) Refresh 12.30/14.30 Average runoff ec2.4 ph6.4 Clone Repel 10.30/10.45/11.20/11.50 Refresh 14/14.30/15.30 Average runoff ec3.3 ph6.3 10/5 Water32L+Purpinator60ml+Calmag170- 240ppm ph6.1 ppm240 Ebb Repel 10.2/10.32 Refresh 12/13.30 Average runoff ec2.4 ph6.4 Clone Repel 10.2/10.30/10.50/11.05 Refresh 13/14/14.30 Runoff ec2.6 ph6.4 Keeper 400ml 10/6 Water32L+Rootdrip10ml+Fulltilt36g+calmag ec0.8 ph6.2 Ebb Repel 10.10/11 Refresh 12.30/14 Average runoff ec2.2 ph6.4 Clone Repel 10.10/10.30/11 Refresh 12.30/14.15/15 Average runoff ec2.6 ph6.4 Keeper 300ml 10/7 Water35L+calmag@150ppm+Purpinator80ml 0.3ec ph6.1 Ebb Repel 11.05/11.48(3min) Refresh 13.20/14.50 Average runoff ec2.2 ph6.4 Clone Repel 11.15/11.35/11.53/12.33 Refresh 14.20/15.20 Average runoff ec2.5 ph6.4 10/8 Water35L+Rootdrip+Fulltilt40g ec0.8 ph6.2 Ebb Repel 11.38(3min)/12.20 Refresh 13.30 /15 Average runoff 2.3ec ph6.4 Clone Repel 11.35/11.55/12.10/12.40 Refresh 14/16 Average runoff ec2.4 ph6.3 10/9 Water35L+Rootdrip30ml ppm40 ph6.1 Ebb Repel 9.05(3min)/9.55 Refresh 11.35/13.35 Average runoff2.1ec ph6.3 Clone Repel 9.35/10.10/10.35/11 Refresh 12.35/14.30 Keeper 400ml per [email protected]

Just feeding and letting them do their own thing. They have done really well for only being in 1litre pots.

I use all biobizz and a few advanced nutrients Cal mag overdrive big bud flawless finish. Looking great really impressed much more stability in the growth structure.

haven't updated in a while. had a lot if things going on. still have been growing. just started to flower about two weeks ago. I'm going to attempt to update if I can find the pictures. I will keep update during the rest of flower. I have decided to go all natural/organic as possible the rest of flower. so I flushed and using a few different nutes. my state legalized medical and so I've been busy getting into the industry! stay tuned.

After the repot they looked very much happy 💚 I repotted with biobizz light mix soil and a lot of perlite,as much perlite as soil cause I'm afraid of root rot and it just works for me🖤 also I still haven't given any nutrients cause they don't seem to want them yet. I put on the fans so that they have some ventilation and to strengthen the truck. they have grown so much in a week! I'm amazed! I also added another Mars hydro TS 600 so that they get all the light they need and hopefully speed the process up a little. 💚

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 68 since the time change to 12/12 h. Hi everyone :-) . We arrived last week :-). The trichomes are 70% milky, 20% amber and 10% clear. The nutrients have been used up and the lady is allowed to stay a few days before she comes into the darkroom for 48 hours before the harvest. Of course there is an extra update for this :-). Otherwise the week was poured 3 times with 1.2 l. The tent was cleaned and all women checked. Have fun with the update and see you next time. stay healthy 🙏🏻 You can buy this Strain and Nutrients at : https://greenhouseseeds.nl/ ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Green House Seeds Company Cup Clone 🏆 Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Earth: Canna Coco ☝️🏼 Fertilizer: Bio Grow Feeding ( GHSC ) , Enhancer ( GHSC ) , Bio Bloom ( GHSC) ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8

Tops rock rock hard .had to put strings cos they was falling cos of the weight. I think is comimg to the end and stressing me out cos first time doing it .dont wona start to flush to early ....any help would be much pri...started looking at the trichomes every day now

This week we should really see these colas blow up and start stacking really strong. The mixer of 7 hours of sun and 17 hours under my LEDs has really helped my girls grow strong. Nothing compares to good old Mother Nature.

Another week down, and here’s where things stand: BioBizz#1 This plant is now showing the first signs of nitrogen deficiency on its lowest leaves, even though I’m already feeding 120% of the Grow nutrient according to the schedule. It’s something I’ll keep monitoring closely. AN#4 Still no visible deficiencies here! This one is thriving, and I’ve included a comparison photo in the gallery to showcase its progress. AN#3 This plant continues to improve steadily, and due to space constraints, I’ve decided to send it into flowering as well. Let’s see how it performs moving forward! 😅

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** This week has been interesting, I was getting some weird runoff numbers in terms of EC/PPM and PH, so I decided to try and bring the PH up with a flush of high PH water into the medium. I did not have any PH up on hand so I used borax, PH of 9-10 plus it will help kill off any microbes in the soil that I believe is causing the PH swings. After doing this and getting the PH I wanted in the solution I released that the amount of B in the solution was to high and would cause more issues down the road, It was late in the day so I left the next flush to fix the excess B till tomorrow morning. Morning came and when I processed to flush I added in a bit of peroxide to the water and a dash of dish soap to break the waters surface tension so it flows through the pots more easily. This was going fine till it started to not drain out at all. I think it was foaming up in the medium and preventing a normal flow, plus on two of the pots I lost my perlite that sits on the top of the medium. I had to massage the pots "like when you transplant" to make then start draining again and then purchased a Yucca extract to help it flow through. Everything is back to normal. The pots are really root bound and should be transplanted but its mid flower and that's not going to be happening. I also don't know if I'd even have the space for it. I added in a b1 vitamin as well on recommendation of grow shop as apparently their other lineup I purchased did not have any. No idea if its working well only first week in the feeding. The Cytokelp is fun, but the one hormone in it is similar to a PGR but its not a real PGR. I am skeptical of it and not using it as foliar, just root watering. I also added in a bit of CaMg supplement that gave the plants a boost in N and Ca. The mg of this product was lesser then others I have seen about a 5:1 ratio of Ca to Mg. after the big flushes the runoff was hitting 120ppm so I gave it a good feed at 1.8EC Time will tell If i fucked it up royally by doing all this, this seedsman plant is still quite sensitive to cooler temps. My tents hitting 17c at night and it still is acting like its hitting 10c as autumn colours are popping off on them. Some of my other plants are also discoloured but not to the same extent as this one. All the plants are still stretching but it seems slow to me. Maybe it will continue going but it only put on about 10cm in the last week and a half. Feels slow. I may see more stretching in the next week upcoming and it just had a ruff start. Lights still running at 100% with V1 spectrum, everything seems to be working just fine, no light burn. Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ Facebook: https://www.facebook.com/medicgrowled Twitter: https://twitter.com/medicgrow Instagram: https://www.instagram.com/medicgrow420/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow

Removed some lower branches at the end of week 9. ✂️ Things were getting a little tightly packed in the flower room. 🤷‍♂️🏽🌿 Both plants are showing signs of female sex.😎 That about some up week 1 of flower. 🌺

Had bend her main cola over again!! She was growing into the light. She just keeps spreading out too! Wish I had a bigger tent for her. The buds are starting to fatten a bit. I defoliated her again. Trying to get some better light penetration and air flow.

Hi! Thanks for checking out my Royal Dwarf grow! Please comment on how healthy you think the plant is or any thoughts. In less than 2 weeks I have learned so much from you guys and i want to make a point of thanking you as this medicine allows me to live what I would consider a normal day to day life! :) So... Beginning week 2 and from the first few pictures and videos I think the plant is getting healthier, Getting a ph meter this week also, will probably resolve any issues I think I'm having. Day 7/8 I was going to switch from the Vitalink Plantstart + Canna Rhizotonic schedule to Canna A, B, Rhizotonic and Cannazym. I have not gotten around to doing so yet as I think I've been overwatering the plant. stopped watering and started using the spray bottle to keep the moisture up. will water with the new nutrients once the plant has dried out a bit. Day 9: Transplanted from a 1L to a 19L/5Gallon, the top half of the 1L container was dry and had what looks like well developed roots and the bottom half was wet and the roots were hanging out when transplanting. I definitely should have let it dry out more. Day 10: Rhino pro 200/600 Carbon filter arrived and it's the 1100cfm/overpowered version as I read it was better to get a filter with a better CFM rating than what your fan can move. The fan is an Isomax 900cfm or is it m3/hr ? I added a short video after the pics so you can get a fairly good view of the setup. I got 5m acoustic ducting and connected it up as best I could with the space I had. I Was covered in rock wool, didn't have wire cutters and had to go buy some to finish the job 😅. Talk about a nightmare! I left 1mtr spare ducting for the intake fan in future grows. I think it's worth mentioning that the 6 fans on the back of my grow light are louder than the filter/ducting/fan/ducting (in order). Noise level of light and fan combo is between a really expensive/good quality bedroom fan and a hairdryer as a comparison. As I don't have my intake fan yet Im using passive intake and my fan has a 3 speed controller so I have it on speed 1 and there is negative pressure. Finally i mixed up the canna nutrients and changed ph from 7 to 6, I'm not sure what's ideal for autos but I read that anywhere between 5.8 and 6.3 is good for autos? Let me know! Day 11 (update) As I have now realised how to edit my weeks in the diary I will start doing so! Read that a fluctuating PH is good between 5.5-6.5 so I'm gonna stay at ph 6 and let it do its thing. The plant seems to like this a lot more than ph7 although it is still stressed from transplanting (1ltr-19ltr) it's still growing new leaves but growth appears slower. Finally after a few cold showers I have recovered from being covered in rock wool! (thank god😂) also I started a RQS Quick One as a backup for the dwarf and RQS Fast Eddy as Im eager to see if medical marijuana has a better effect on my depression, anxiety and sleep problems than regular high thc low cbd strains. Check out my profile (JuicyFruit) to see my diaries for these strains! Day 13- my dwarf still seems stressed from the transplant, its growing some new leaves slowly but is still drooping from transplant. gonna be a dwarf-dwarf by the sounds of it! 😆 and i was doing some research on optimal hang heights for my Phlizon "3000w" COB LED, it seems that 40 inches is good to start from. i also read another users opinion that the switch on the fixture labelled VEG&BLOOM is mixed up with the other switch that is labelled STRONGER. The VEG&BLOOM switch is LEDs along with IR. (i read that the IR is probably further stressing my transplanted dwarf) and the STRONGER switch is COBs. i took a minute to think about this but after realizing that the plants can probably handle the COBs (STRONGER) at the right distance i may aswell use them for veg and switch the LEDs and the COBs on 1 or 2 weeks before flowering for full flower power! after reading all that i went straight over and switched the LEDs off and put the COBs on. il post pictures in the morning to show how the plants reacted. fingers crossed people! Please comment on anything you think i could improve on or any advice to help this plant grow better as it is much appreciated! Peace! Day 13 Update: took some photos and it likes the COBs, although they are very hot combined with a sunny day reaching high temps of 29c. turned the fan up and opened another passive intake on the tent. finally im going to get some calmag and a oscillating fan for the leaves and hot spots in tent :)

Welcome the KingBong's first GrowDiary!!🦍🌱 The grow box is still being finished off but I'm happy with results so far. I'll be adding a custom carbon filter In the top corner and also a small intake fan low down... also a door!! This is going to be a fun experiment hopefully you all enjoy ✌️🇬🇧

como ya habia mencionado anteriormente estoy esperando que esten listos los cogollos para poder hacer las pruebas de rigor. pero es una cepa, rapida, fuerte y versatil. apta para cualquier cultivador.

There are less spiders with the lowest temperature as possible. The smell of the #GAK is awesome ! They smell pineapple more and more ! She looks like more frosty too. T4k3 c4r3 all ! 🙃