SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.

Hello. This is the beginning of flowering. I've got a 10'x10' tent in the greenhouse going for another diary, and I'll put this plant into it to force it into flowering. The plant has reached the top rung of the tomato cage, so, that's when I usually force flowering. That's what I like... I took some clones from this plant, and it didn't have many side branches to chose from... It had some but not alot. I put my clones in a opaque ice cream bucket. With a thin plastic moveable lid. And a tsp of cinnamon mixed into the soil. A couple of inches on soil into the bottom and press the peat pellets about 1/3 into the unpacked soil. Cannabis like 90% to 95% rh for the first week and those domed plastic lids for the black trays let out too much rh out and the plants/clones wilts. Leave the light on for the first week too. Plants need to store their energy in their roots to sleep. So, with no roots, leave the light on. The second week you can give 80% to 85% rh, move the lid back a bit, and 6 hours of dark. Spray with 1/4 strength nutrient and use RO water for all your soaking and spraying. RO water is low in rot root fungus, so you have a better chance of succus. The plant is doing well and growing good. OK. Be Cool. Chuck.

Quite happy with this run, cant complain really. We will see how it turns out once everything is cured.

Sigo añadiendo humedad pulverizando con agua destilada, tres o 4 vecs al dia.

She is growing ok next week will get much fatter

Beautiful looking pheno of ak420 by seedstockers guys this one just line the pheno #1 is showing beautiful purple colors on the leafs, strong smell, not as strong as amnesia and haze but very sweet and flowery aromas, let's see how this wonderful lady performs! 💎👨‍🌾😋💚❤️💛

👽💪

Nice growth. It's been stormy here so they're a little stressed but will strengthen back up when the sunshine comes back out. I'm thinking, or at least hoping, this is a female 🤞 I topped every bud site on every plant, both indoors & outdoors.

4/6: The shortie is still drying, and I the bigger one is in the dark until tomorrow. 4/7: I harvested the bigger one and washed her buds. Very berrry! Later that night, I jarred up the shortie....drum roll please....she came in at a whopping 314g!!! It's very humid lately, so I'll weigh her again in a couple of days...she'll probably lose another 10-15g...but still...she fat. She very fat.👍 4/9: Evidently, I'm retarded. I must've put both #6's into the same drying rack. The photos I had posted of the "#6" were actually of a #3. The combined total weight of both #6's is actually 314g...the shortie probably weighed about 180g and the bigger one probably weighed about 130g. I'm still looking for the harvest photos of the bigger #6...

So far I kinda messed up getting everything done on time. Plants are harvested and in cure now. All in all, the plant would’ve had around 86g dry if I kept it all.

Cherry bellini

Great to be able to let a plant go, little care and then get a gift of some tremendous looking bud. Can't wait to smoke test but for now I'm happy with day 3 of drying and the amazing smell is still intact. 😁

Start of week 14 (Day 49) 9/20/25 Fed with water 9/20/25

Still stacking

Día 86 (01/01/2024) Riego solo con H2O con pH ajustado 6,21 Día 87 (02/01/2024) Avanzando hacia la cosecha. Observo algunos tricomas ámbar 😁 Día 88 (03/01/2024) Al inspeccionar y tocar los cogollos, vuelven a salir los aromas a skunk y naranjas. Delicioso! 😍 Día 89 (04/01/2024) El aroma se está volviendo complejo en esta recta final, como naranjas, skunk y con toques picantes de fondo. Impresionante 😍 Día 90 (05/01/2024) Mañana la cosecha! Hoy le tocaría riego, pero como mañana es la cosecha, la dejo con 24 horas de estrés hídrico. Día 91 (06/01/2024) Al final cosecharé un día más tarde. Los tricomas están prácticamente perfectos, con la mayoría nublados y alguno ámbar Día 92 (07/01/2024) Día de la cosecha! 😍💥💨😁 Peso húmedo 150 Increíble rendimiento para 92 días desde semilla, y con el estrés hídrico de los dos últimos días Ahora comenzamos el proceso de secado (7-10 días) donde pondré la semana de la cosecha, y posterior curado (+30 días), tras lo que tendremos el informe de humo Gracias a todos los que estais al otro lado de este diario!

almost ready to flip 23days since sprout

NOTES: Keeping EC at around 1,5 and pH at 6,0-6,2. Everything looks great and I'm hoping for amazing crop to start the year with! One Ayahuasca Purple seems to be clearly ahead of others in flowering but that's fine. I'm going to harvest them all at the same time so I'll have a few different terpene profiles on the finished product, since they are all grown from seeds and not from clones. Day78 (2.1.) Day79 (3.1.) Light defoliation to reveal more bud sites and to remove some lower growth that aren't getting any light. Day80 (4.1.) At last I've finished defoliating and pruning for all my plants. I think there is no need to remove anything before harvesting them. It took a hell lot of time to finish since I have 13 plants pretty close to each other that I can't move separetly. Also using garden-ties to bend some plants a bit for better light coverage. Day81 (5.1.) Day82 (6.1.) Tied some more branches for better light coverage. Day83 (7.1.) Day84 (8.1.) I found a hermaphodite/bi-sexual plant! Strain was Kush Mintz and I haven't seen any signs on other plants. Keeping close eye on everything, hopefully I got it removed on time... I cut it off after analyzing the situation and hang it to dry in another room. It was clearly the smallest plant even though it seemed to flower just fine till this day when I found out those small banana-like pollen sacks. I'm praying this won't ruin my entire crop.🙏 Added a couple pics after removing it from the tent.

Been keeping a close eye of everything this past week. I was fighting a little with humidity levels as they were staying around 70%. Picked up the Spider Farms Dehumidifier and been running for about 24 hours and got things staying at 60%. Still a little worried for later in flowering as I know Target is 40% so I’ll just continue to work on adjusting levels as needed. I trimmed up the plants a little to increase airflow and also pull out the light controller and ran it outside the tent. The 1st couple days of flowering I ran into an issue as my temperature probe went out and caused my AI controller to not be operable so had to do things manually for the first few days. Ended up splicing some wiring and got things working (ghetto but worked lol) until my new cord arrived. Switched over to Advanced Nutrients and picked up their Starter Box, excited to see how things go as I’ve heard nothing but great things. Started with a lower dosage to get things going. Hoping to see some real growth this coming week! I also started germinating some seeds for my next grow so should be starting a new dairy when those sprout.

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The flowering is now started, hedgehogs are there 🦔, plant look good, and grow faster. Started flowering nutes, did a litle defoliation. Already a sweet smeel 😋😋 💡 I up a bit the supply of lamp each days. 💪 I continue the training, but don't need to touch so much now. 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1 l Water + Roots + Zym ( 1 + 1 ml/l) 1.25 l Water + Roots + Bloom + Sugar Royal (1 + 3 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 37% 56 cm. Mars Hydro Fan kit Setting 6 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - Deep Jealousy Auto🌲🌲 https://anesiaseeds.com/product/deep-jealousy-auto/