The Grow Awards 2026 🏆
Likes
Comments
Share
The cold is taking a toll, that’s for sure. Still looking decent but I’m sure I’ll get my fight with this one ________________________________________________________________________ Light from @MarsHydroLED 😎 FC-E6500🔥 730 Watt⚡️💥 2.85 μmol/J🔥 Full Spectrum 🌈 WiFi smart connection 😱 Tent: Mars Hydro 4x4 Light: Mars Hydro Smart FC-E6500 Exhaust fan : Mars Hydro 6”. Heating mat: Mars Hydro “48x20.75”
Likes
9
Share
@BLAZED
Follow
Germination (4-6 to 16-6) White Widow - Green House Seeds Co. Genetics: Brazilian x South Indian. 25.76% THC, 60% Indica, 40% Sativa. Flowering time: 8 weeks. I chose this strain because i bought it alot in the coffeeshop in 2018, nowadays the White Widow tastes nothing like how i remember it to be. So i decided to grow it my self. I read somewere that Green House has the most original genetics and its the seedbank where i am the most familiar with so thats an easy choice! 4-6 Today i put 2 White Widow seeds into a wet coffee filter to germinate. 6-6 After 48 hours the 2 seeds are ready to be put into a 0.5L pot filled with some Plagron Lightmix. The lightmix has some nutes for the first 3 weeks or so, i will feed nutes when i transplant them into 18L AutoPots with 70/30 Coco-Perlite. I made a feed with 0.5 gr Calcium and 0.2 ml Rootstimulator per liter. EC: 0.4 PH: 5.8, and watered the pot a bit. I let them stay in the dark untill i see them above the soil. 7-6 After 24 hours they are above the ground and i removed the plastic foil covering the pots. 8-6 Temperature: 19.5 to 24.1 degrees Humidity: 41% to 70% Watering: 20 ml. 9-6 Temperature: 18.8 to 23.4 degrees Humidity: 62% to 74% 10-6 Temperature: 19.4 to 23.9 degrees Humidity: 60% to 74% 11-6 Temperature: 19.4 to 25.2 degrees Humidity: 43% to 71% Watering: 25 ml. 12-6 Temperature: 21.2 to 25.4 degrees Humidity: 44% to 60% 13-6 Temperature: 22.2 to 25.9 degrees Humidity: 44% to 71% Watering: 15 ml. 14-6 Watering: 60 ml. A week later and today is the last day of the germination phase. They are starting to grow faster from now on.
Likes
7
Share
Looking very good, this ladies are breaking the shield within 48hs since planted as I was expecting, let's see how my beautiful queens develop on this "little run" on a 2x4! Growing with a tsl2000 by mars hydro! 👨‍🌾💯✌️ Stay tuned guys.
Likes
8
Share
Processing
Likes
15
Share
@MG2009
Follow
12/11/2019 Update is a couple days early but, I'am quite happy with growth this week, transplanted #1 to a 3gal, pot added p Plant Success 3-1-2 With Myco and tricoderma..?,. That should aid in reducing transplant shock, #2 transplant next week need more soil. 12/13/2019 Uploaded pic, hope to do video but we will see. #1 is 5.5" tall # 2 is 3" tall but fatter leaves both are nice dark green. They do not mind the cold, 60°f temps for past couple weeks in fact they have done better at lower temps than anything else I have growing, but I am putting in another heat mat to get soil temps up around 72°f. For other plants they should do well. 12/16/2019 can't seem to get Pics to upload,but #2 has some stinky citrus smell and is at 5" today only one inch shorter than #1,while #1 has a more veg smell, and paler leaves, #2 dark green. Also I believe is Saw my first Preflower on #2 today.🙏 12/19/ 2019start week 6 veg can't get pics uploaded but will add soon as I can. This week Repotted,lite watering to make sure she searches for water, will feed next week lite veg feed maybe trim a little. 🙏
Likes
35
Share
@valiotoro
Follow
A wonderful genetic thank you Fast Buds ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 103g !! For the light i’ve used the Spider Farmer SE-7000💡
Likes
14
Share
Final Report: Grow: The plants has grown very beautiful and healty without pests and diseases. They grown bushy and with medium height during the vegetative stage. I had try to use LST in third veg week but i did't made correctly and after that i dicided to return to grown normally without any particolar tecnique. I used a littel more fertilizer then mine usual and that made the plants grown fast without any problem. In the first two weeks of flowering stage the plants started grow taller and the number of the branches increase, in this phase i only defoliated when the fan leaves turn yellow in late stage. Form the start to the end the flowers grown dense and bigger every day and this time i waited until almost all of them were mature before harvest the plants. I changed the plants from one grow room to another(in the sixth week) when they became too high and they couldn't stay more in the smaller grow box(nothing changed in the enviroment between the two boxes). Equipment and grow box: The enviorment of grow box has been optimized every stage with the right temperature, umidity and air flow. Vegetative temp/umidity --> 23-29 °C/45-55% Flowering temp/umidity --> 20-26 °C/40-50% The air flow was created by two pc fans and one big fan. Harvest: This time i harvest a big numeber of beautifull dense buds and i just discarde only few fluffy buds in the lower branches. The result of this grow is amezing compared to my old expiriences. I harvested the flower and i made a fast curing process after i washed the crop and i let them to dry with a fan on it. After five days a take the branches which were to dry and i did the final trimmig before put all the harvest in a open jar for finishing to dry. I collected all the leaves, fluffy buds and trimming scraps in a bag and i let them dry. Later i put the bag in the freezer and when i collect and dried all the scraps from OG Kush and Dandoverde Haze i did some Ice-O-Lator hash. I used 250g of trimming stuff and i made 11.50 g of hash, I had use a set of 5 bag and i take the resin from the 160µ - 120µ - 73µ- 25µ bags. I pressed all the resin in a great block of tasty strong hash. Always better every time 😊💪 Total harvest ---> 90g only of dense buds and 11.50g of hash.
Likes
9
Share
@Reignfire
Follow
First batch of nutrients in the bucket, she seems happy. FloraMicro (2ml/gal) FloraGro (2ml/gal) FloraBloom (2ml/gal) CALiMAGic (2ml/gal) RapidStart (1ml/gal) ArmorSi (2ml/gal) Adjusted to 360ppm then PH'd to 5.8
Likes
52
Share
Good morning growmies! I am finally back online after moving house and being without internet for weeks. These ladies took a battering and bruising in transit, and were left in the dark for 4 days, starved of water and food for 9 days TWICE inside 3 weeks. Still, can you believe the progress despite all that? Wowza, when RQS say these Epsilon F1s are fast they are NOT JOKING, and OH MY the smell is soooooooooooooooooo good. It's really a complex sweet and fruity scent with delicate notes of spice and sandalwood. I am super curious now. All five plants are within a couple of inches of each other, the tallest being 72cm currently (Dinah!). I am so very impressed with these plants that I am considering running a full tent of Epsilon F1s for my next grow! I wonder if I can get a bulk discount?! 😬😁 Day 54: Fertigated 10l Day 56: They are not slowing down. Ally, Normani, Lauren, and Dinah are all similar size, Camila is a bit smaller but in terms of development they are all very very close to each other. I am really impressed by the uniformity here, more impressed by the speed, and most impressed by the scent. They are not strong smelling, but if you get close or have a squeeze it wafts over you like an exquisite perfume. It is the most complex cannabis scent I have experienced yet. Really really interesting, I am really excited for the eventual smoke review so that I can properly understand the complexity at play here. The breeder and sponsor of this grow Royal Queen Seeds have offered to sponsor a full tent of this strain, if that works out then I will be doing another grow series right after this one. Fingers crossed!
Likes
3
Share
Día 36. Al final me pude desahcer de la plaga de mosquitas. Usé Phitonat plus foliar y puse BTI en el depósito. Fue casi instantáneo con ambas cosas. Las plantas estan empezando a engordar bastante. Se las vé muy bien. Las de variedad Polaris están haciendo cogollos densos y grandes. Mientras que las Tropicana estan con flores pequeñas más distribuidas en la rama. Creo que la Polaris va a dar la sorpresa. La semana pasada decidí no usar EMRO y cuando cambié el depósito, había bastantes restos de raices que van cayendo. Así que volví a poner, pars convertir esas raices en azucar para las plantas. Cada cez falta menos y tengo incertidumbre sobre lo que va a pasar. La Polaris tiene una floración levemente más corta en teoría. Así que es probable que las Tropicana se coman 2 semanas de lavado de raíces cuando toque.
Likes
3
Share
@Reefera
Follow
Worst start to week dwc had ran out of water not long hourn or two but no water and decent heat they dried out and flopped at top managed to save but taking while to get back to good health Plant too close to light some stems tanned red slight increase in distance moved fan from plant getting wind burns on low leaves overall seems ok need to flatten stems
Likes
1
Share
Processing
Likes
33
Share
@BADKUSS
Follow
Hello everyone , Here is the phase of completed stretch, and the fertilizer fertilizer contribution are 100%, flowering starts very well and the appearance of the first pistil are visible everywhere. For the height of the plants I find it reasonable and thus keeping all this world a good size the luminous penetration will be excellent ... until now hene no sign of problem for my plants I think that the flowering will follow its rhythm .. to see in the coming weeks ... now place to photos ...
Likes
4
Share
Likes
216
Share
week 2 : Auto Colorado Cookies in Vertafort So i just fixed my fan on day 6, vpd has been creeping upward the last two days and especially today towards 1.1 , got slightly better air circulation so hopefully the pot will dry quicker from now on. Will probably water 3 pints of water with aloe and cal mag each around 120 ppm, top her up with light mix soil (potting soil aka peat moss) , she's getting night time sprays of amino acids now to balance out the soil pH towards 6.5 , sprayed once with kelp and cal mag ph-ed with GHE dry pH down at 0.1 grams to get it to 6.0 but rain is 5.5 so i pray i'm okay, might do even less ph down next time. completely low maintenance yet she might be the first of the wet bunch to get topped off and watered once dry 🚀
Likes
31
Share
@buddha61
Follow
7/29 - Week 9 of veg is starting. At this point, it is just let them grow up a few inches, and also fill out the pots some more with roots before transplanting to 5 gallon fabric pots (their final homes). I also plan on mixing a 'flower blend' soil to fill up the 5g pot around the rootball that is transplanted. This recipe for the soil is taken from MaximumYield: Enhanced fruit/flower potting soil recipe This soil recipe is designed for plants that are ready to fruit or flower. In particular, this recipe works great for ornamentals that are already in bloom and for fast-growing annuals that are entering their fruiting or flowering stage. Parenthesis indicate small changes or products I'm using. 1/2 cu. ft. (60 cups) sphagnum peat moss (Promix BX) 1/4 cu. ft. (30 cups) coco coir (Mother Earth Coco Peat) 1/4 cu. ft. (30 cups) compost (either compost or manure) 1/4 cu. ft. (30 cups) perlite 10 cups pumice (likely to just use perlite here) 5 cups worm castings 3 cups bat guano (high phosphorus) 1 cup fish bone meal (using regular bone meal, got Jobe's Bone Meal) 1 cup oyster shell 1/2 cup seabird guano (likely to just add as the high phosporous guano) 1/4 cup alfalfa meal 1/4 cup fish meal (Down to Earth Fish Meal) 2 tbsp. langbeinite (Down to Earth Langeinite) 1 tbsp. glacier rock dust (Azomite ordered from Amazon) 7/30 - While technically the morning of 7/31, lights haven't gone out yet, so it is still the 30th ;) It almost hurts posting pictures today, because they were really thirsty, but I honestly hadn't looked at them for a couple days. Anywho, the plants were watered with ~1.25 liters of water each, about 90 minutes before lights out. Will be interesting to post the 7/31 photos after a couple hours of lights on, and see the difference in appearance. I also mixed the soil for flowering, and it will now have a couple weeks to 'cook' and become ready for the plants. I did make a mistake and accidentally added 1 cup of fish meal instead of 1/4 cup (oops), and the alfalfa meal just smelled too good, so I added 1/2 cup instead of 1/4. Hopefully those 2 'changes' don't add too much nitrogen for flower, but I imagine it won't. I also instead of adding perlite (didn't want to buy a 4 cu ft bag when I needed at most 2.5 gallons (1/3 cu ft), so I opted to add 1 gallon of pumice. Since the coco peat and promix both have perlite in them, I didn't want too much added. There were also some worms from the compost that made it into the tote that is now storing the mix, so life has already started in the soil. 7/31 - It wasn't just after lights on, as I didn't have time to photo earlier, but this is just about 24 hours after watering, and praying/looking good. I had noticed that it looked like the fan had slipped down the pole a bit, and was causing some wind burn/clawing of the leaves yesterday, which probably attributed to poor looks, but looking better today! While I am not that versed in checking preflowers, from what I can tell, if I had to guess, CH#1 could be either (maybe slightly leaning towards female, thought I might have saw a couple hairs), and the #2 actually looked male to me. 8/4 - After getting home from work, and realizing I hadn't checked on the plants in a couple days and I knew they were due for water either yesterday or today, I saw some THIRSTY plants. They each got ~1.2L of water, and also a quick trim back. After checking preflowers again, I am afraid that both Chinook plants may end up male :(
Likes
8
Share
@Aldo90
Follow
I was going to upload the process, but the wiser side of me said no. So I've edited it out and some of the evaporation process can be seen. Bho/wax/honey whatever we care to call it