Processing
Likes
Comments
Share
Last week of feeding before flushing. She's a very sticky plant, nice smell, heavy buds!! Looking forward to harvesting this girl and lighting her up.
Likes
2
Share
Strain: Fast Buds – Mendo Guava Auto Grow Type: Indoor Pot Size: 3 Gallon Pot Medium: Peat Moss & Perlite Nutrient Line: Athena Week 3 Update Well… so much for the Fast Buds outdoor grow 🤣?. This girl never actually made it outside, so I guess she's officially an indoor girl now lol. There's always next year 😩. That aside, she's doing really well. For only 3 weeks, the growth has been pretty insane she's thriving, pushing out vigorous growth and already starting to transition into flower. I'll be switching her over to Bloom this week as she moves further into the transition. So far there are no issues to report at all. She's healthy, moving fast and honestly looking better than I expected at this stage. At this point, I'm just going to let her keep doing her thing and see how much more she stretches before she fully settles into flower 🌿🔥 Feeding Volume: 750ml Athena Grow: 45ml/gal Athena Core: 25ml/gal pH: 6.2 PPM: 700–800 ppm Frequency: As needed Indoor Climate Conditions (Transition) 🌡️ Temperature: 20–25°C 💧 Humidity: 55–60% 📈 VPD: 0.9–1.1 kPa ISLANDT – 15% off Fast Buds strains 🌿🔥
Likes
142
Share
Hey everyone :-) This week it smells more and more sweet and fruity in the whole room 😍. There is actually not much to report, everyone is now under 12/12 :-). This is the last grow that comes in the entire diary. From now on, each plant will be added to the diary 👍. I wish you all a lot of fun watching, stay healthy 🙏🏻 and let it grow 😎👌
Likes
13
Share
@Hazeberg
Follow
I will update the report after it has dried, to give a number and also later with a smoke report. Stay tuned!
Likes
3
Share
@Takeaims
Follow
Defo going keep going with f1 I have more still growing and there the biggest plants I've had thanks zameizia you guys are amazing
Likes
Comments
Share
@Swanberg
Follow
The growth of this plants is very structurally sound, impressive density, and exceptionally loud. My carbon filter must be spent. The exhaust from my grow room is 8/10 on the “stinky scale”
Processing
Likes
2
Share
@MG2009
Follow
08/16/2020 This is my first clone from Red Sky, the mom of all these clones in the tent, (video #1). All others are at different stages of flowering, she is beginning week number 3 of flowering.
Likes
9
Share
@ZalySk
Follow
F39: growing well. Hasn't really faded, but then again the plant isn't too big so it probably doesn't need to consume itself to get bigger. Still no smell when I touch the plant and the growth is still nice and nug like. Going to be the easiest trim of my life. There's a slow swell on size, I think next week I'll break out the Nikon to get some good up close pics so I can start to follow the trichomes.
Likes
16
Share
@LST420
Follow
Week 16 The buds really start to form and smell now. And because of the high density of buds I regularly defoliate so they all get the maximum amount of light.
Likes
46
Share
Day 75: Due some heat problems inside, some started to foxtail, some leafs got burned besides being yellowed which is normal in this phase. This happend because the outside climate, which heats the walls of my growing space and warms the fresh inflate air. The temperature outside increased by 4-7 degrees. So my room is no longer 25-28 degrees celcius, but now is like 30-31 which is a huge problem. This is the negative side of having lots of heat lamps instead of cold LEDs. Did add an airco unit with a easy fix. Might change it into a better fix but I don't have much time. After the pictures, I started removing old leafs,fixing some plants and gave them water. I don't like to take pictures afterwards, it doesn't show reality. See you guys next week.
Likes
1
Share
@Ananacio
Follow
Hola! Van por el dìa 20 de floración. Casi no he vuelto a defoliar, aunque esta bastante tupido no quiero estresarlas mucho. Saludos
Likes
18
Share
Harvest was done on a lovely summer day. Since summer was approaching, half of the harvest was hung upside down with the classic 60/60 and rest is stored in a wine cooler for drying. There’s also an oscillating fan below for airflow!
Likes
95
Share
@Roberts
Follow
The salt build up finally caught up to me. I gave her a good soaking watering then followed with fresh feed. I will repeat this once she dries put if there is no ill effects. It should help clear up the issue. Her run off ph was 5.8 which was a sign of the build up. It should be on the right path now. 🤞🏻 next update she is back to healthy, and u can switch her to flowering before she gets too big. Thank you Divine Seeds, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
571
Share
I want to thank my buddy @Vlugge_japie for helping me cut, without him i wouldnt able to trim her in 6 hours. I also want to thank you my followers for your kind words and encouragement to make her a monster. Without your messages a grow is just a grow, but through growdiaries and each other's diaries we want to challenge ourselves every grow Lots of love to you my new friends. Who am i ? until last november i have always grown hydro for a little over 11 years. But growing started to look more and more like work because i was more busy with programming my controllers for the ph / humidity / lights / soil moisture / temperature. Also the realization that i have 2 children and my own house made me nervous for the authorities because where i live growing is not allowed. So i decided to grow smaller where i previously had 200x180x200 space i opted for 70x70x160 with the result that i can only grow 1 strain at a time. The intention is to remain self-sufficient in this way and still be able to exchange or give away something here and there at a party. Although I am sponsored I will not be able to grow every strain because not every strain can deliver the result I need to remain self-sufficient. If you know of an auto strain or photo strain that takes at least 11 to 15 weeks I would like to know so that I can grow it in the future and of course I will try to set a record for that grown strain. Because during the 4 grows that I can do per year I can only try to achieve a record since I cannot show you multiple strains at once. I am happy that after 11 years I have found growdiaries and that I have met you my friends.Greetings MonyetDiablero.
Likes
36
Share
Hey everyone 😀. Another veggie week goes by and they are developing surprisingly well 😃. Both phenotypes look very nice and have a perfect leaf green. Both were topped again. I wish you lots of fun with the update, and stay healthy 🙏🏻🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
10
Share
Likes
2
Share
Septima semana y bueno creo que los resultados estan a la vista, hay que seguir aportando y esperar a la novena y ansiada semana. Un buen lavado de raices, luego secado y finalmente curado seran vitales y plantas como estas ameritan perfeccion.
Likes
15
Share
She’s a little shorter than the rest only by a couple of inches! I’ve opened her up by defoliating the bigger fan leaves and letting light get to the lower bud sites allowing better quality buds (non airy/popcorns) humidity hit between 50 and 56% and that’s perfect! Will lower in the last 2 weeks to 40% and hold during flush! Thanks for stopping by!
Likes
43
Share
Harvested week 12. Solid root mass. She yielded about 5-10g which I quick dried and smoked as I had nothing in at the time.