Plant #1 (bushy, lanky pheno, skinny buds absolutely COVERED in trichs) Harvested at 56 days or exactly 8 weeks from 12/12 flip. Had a good 75-80% cloudy, 10% amber, and a few clear trichs. Dried at 48-59% RH, 3 days hanging/ rack drying and was dry enough for me to put into jars (few hours open, few hours closed) early tester smoke was phenomenal! Super heady high, lasted a good 2-3 hours for me and I am an all day dab and flower smoker! That's saying something to me! I cant wait to smoke her once it cures a bit more, super excited! Smell is not too overpowering, smells very floral and earthy, complete opposite of plant #2 (garlic-y, funky, cookie heavy smell 🤤👅 Total weights; Plant #1- 66.2g Plant #2- 65g

Harvested a week early because of bud rot caused by calcium deficiency. I did a triple wash with hydrogen peroxide, baking soda and plain water to rinse. Note for future Coco needs a lot of calcium and magnesium. With constant drip system you need way less nutrients in solution. Check PH if you use calcium sulfate or silica!!! Once cured the weed has a good nutty smell with a little berry. It’s not very resinous, it has a good mind numbing effect but doesn’t lost more than one hour for 3/4 puffs, this is because of early harvest for sure because my previous crop was lot more potent.

The auto flowering have started to flower...The feminized ones are growing very fast.

Week 6 of my 4th grow autoflowers dry nutrients were very useful and the boost to flower made these my tallest and healthiest plants great PH and 81’ with three big external fans and and two in my tent great VPD. Plants were gently lollipoped and LST worked I bent trunk on main and I used everything on Tuesday first silica then cal mag, Mychorysia granular, molasses, PH booster Fox Farm , regular 10/10/10 liquid nutrients just a smidge, and rain water 775 ppm 6.5 PH. I soaked them about an hour set them on grills for 10 minutes to drain excell then returned to tent. Heavy and I mean might wait four days for next watering ⭐️👍

Skipped a week so that the weeks in the diary were the same age as the new plants also took over my wife's aquaponics ak auto flower that is 4 weeks old so ill add that into the grow. The aquaponics plant was in rough shape it was showing huge signs of cal mag def. So I went to the local fish store and bought a cal mag substitute that's safe for fish also dropped the ph to 6.1 she had it at 7+ (not her fault ph metre broke )now plant looks great 1 week later after pulling off all affected leaves. Nothing new with the girl sco8t cookies except I fed today 1 gsc starting to lighting up

I like the result a lot ! Not a lot of colas, but really big buds. As I thought moon rock strain could be all white, but it is simple strain, smells like a gasoline and garbage, not anything fruity or juicy But very beautiful !

FERMAKOR BARREL MIX – BASE IN USE (Testing on the Fantasy Feast girl we pulled out of another diary https://growdiaries.com/diaries/274722-grow-journal-by-yan402 ) (FERMAKOR BASE SYSTEM KOH VERSION diary https://growdiaries.com/diaries/278391-grow-journal-by-yan402) (Urea & Micros on the way — first week running without them) 🍶💧🍶💧🍶💧🍶💧🍶 💧 30 L Barrel – Current Working Mix 🍶💧🍶💧🍶💧🍶💧🍶 Step 1 – Calcium Nitrate (Part A) 7 L warm water (~35–40 °C) → added 45 g Calcinit, stirred until fully clear. That’s the calcium + nitrogen backbone for the feed. Step 2 – FERMAKOR PK Base (Part B) 15 L water in the main barrel → added 30 ml FERMAKOR PK Concentrate, mixed well. This forms the main P + K part of the formula. Step 3 – Combine Solutions Slowly poured the Calcinit mix into the barrel while stirring — no reaction, still crystal clear. That confirms the mix is stable and precipitation-free. 🌿 Step 4 – FPJ / FFJ Batch Added 30 ml homemade FPJ (fish + veg batch) ≈ 1 ml/L. Color shifted to a light-amber tone — looks alive and active. 🍋 Step 5 – Citric Acid Balance Added 1 tsp citric acid after everything was blended to fine-tune pH and help chelate micros later on. 📦 Step 6 – Top Up & Check Filled to the 30 L mark with plain water → pH tested with drops, showing yellow-green — roughly 5.8 – 6.0 range. Nice clean look, stable smell, no residue. 💧 Current Base Ingredients (Active Mix) Warm Water ≈ 22 L total Calcinit 45 g → N + Ca foundation FERMAKOR PK Base 30 ml → P + K support Citric Acid 1 tsp → Chelation + pH balance FPJ / Fish Emulsion 30 ml → Organic enzyme booster Result: clean amber mix, mild and balanced. I’ll let this version run for a week before adding anything. 👀👀👀👀👀👀 Observations and changes 👀👀👀👀👀👀 27.10.25 VW27 noticed some min burnt tips so I decreased Calcium Nitrate 45 to → 40g, decided to add two more elements micros and Epsom salts just to make sure they got everything, Fetrilon Combi 1 (Micros): 0.5 g, Epsom salts: 8 g 28.10.25 VW27 she seems devoid of any deficiencies, seems ready for the flip to 12/12 02.11.25 VW27 girl is looking good so I decided to stop making daily videos and do a standard once a week update. 09.11.25 aVW28 7 days since flip,stretch in full swing, first pistils showing, leaf color deep and healthy. Slight tip burn early week → gone after pH stabilized. Feed stayed clear, no residue, roots clean and sweet-smelling. 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 09.11.25 VW28 -- Fed 5l of #1→ no runoff 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30 L #1 Veg — FERMAKOR 🍶💧🍶💧🍶💧🍶💧🍶 💧 Calcium Nitrate (Calcinit / Nitcal): 45 → 40 g = 1.33 g/L → 207 ppm N + 253 ppm Ca 🍶 PK Concentrate (FERMAKOR Base): 30 ml = 1.00 ml/L → balanced 1:1 P:K + light micros (from extract) 💧 Home-made FFJ/FPJ (Fish + Veg): 30 ml = 1.00 ml/L 🍶 Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → 26 ppm Mg + 35 ppm S 💧 Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm • Mn 0.7 ppm • Zn 0.3 ppm • Cu 0.3 ppm • B 0.1 ppm • Mo 0.02 ppm 🍶 Citric Acid (Chelation & pH Balance): ½ tsp (max) = 0.16 tsp/L → add only after pH check 💧 Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL: 60 ml / 48.5 g inputs per 30 L = 2.00 ml/L + 1.62 g/L YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31

- GERMINAZIONE - P.S. = Periodo da quando tolgo il seme dall’involucro fino al settimo giorno (una settimana) conterò questa settimana di germinazione a parte e le 5 settimane successive come vegetativa. Settimane totali dall’innesto del seme: (6 settimane piene prima di girarle in fioritura). Ciao amici !! Dopo aver tolto i semi di Gorilla Girl f1 fast version di Sweet Seeds dal proprio involucro abbiamo proceduto con l’inserimento di 3 di questi nei soil plug, mentre uno l’abbiamo fatto germinare nella carta/cotone, mantenendo i semi bagnati e umidi per i primi 3/4 giorni, tempo necessario per far “sbocciare” il seme. Una volta notata l’inizio della plantula abbiamo innestato i soil plug (e il seme singolo) negli appositi vasi, rinvigorendo il terreno con la giusta quantità d’acqua. (Terreno già concimato una settimana prima)

This week I'm going to talk a little bit about the 2 gal pots I leave outdoors. Since they're going to be indoors now, I've assembled a fertilizer rack and the bottom compartment is perfect for a cage with all the plants I have. With a length of 1.5m, width 65cm and height of 1m, I will use 4 led bulbs 50w and 2 full spectrum LEDs 36w long 1.2m. 272w / ~ 1m2. 2/3:Plant the plants indoors and lst them. 4 led bulb 50w 5/3:Run off all the trees, as it was soaked with rain water when left outside. is still the old nutritional dose. 6/3: Today I received the led light I ordered. I perfect my design and let the tree in the cage out and lst. 9/3:I feel everything is perfect today, I reduce their lighting time to 12/12. I will cut off all the fan leaves from the stem of the 2gal pots and prune all the small branches of the 1gal pot. in this pruning I will trim them as much as possible. It's been 37 days since the seed and I think they're ready for flowering. I need to flower them urgently because in the next 2 months the weather can be as hot as 40 degrees, and I really have no way to reduce their temperature. I would probably have them flower for 7 to 8 weeks to retain maximum resin. a few days before high, I fliming an NL plant, I experimented with this technique and I feel that they have been very successful since the fliming plants have a much larger stump than other plants. I really like this technique, as it will save me the small space I currently have without having toppings. With just a few simple steps I have got a really big stump and still keep the biggest main bud of the tree. I hope each plant can give me 20-25 grams of dried marijuana.

Added some CO2 to help with photosynthesis while at higher temps. These ladies really blew up at the end of last week and this week! The smell has really starting to be noticeable and pistols / flowers are finally showing! Side note I finally got more seeds to replace the one I lost early on. These ladies are really starting to become a treasure. Ended my LST this week.

The Plant was transplanted it 0.5 litre pot..

Day 2 in the pots they came out beautifully with their seed as a hat! Day 4 they were all 3 1cm out of the ground, they were born! Day 6 is almost over today and 2/3 seeds go delicious. Both of them already have their first set of real leaves and you can see the next set coming, oewhhh. Unfortunately there is one that I think is less gene/old seed. It sits around half the height and the lobs are almost closed, but hopefully it is still hard 💪 🏼

Look at this beautiful plant had no stress or.problems just done her thing and exploded into life great fun to grow going to another one as soon as possible this one doesn't have long

Start of week 7, this girl is looking pretty 😎 started flowering nutes 💪🏻

Had to cut the Moby down. More and more mold developed so I saved, what I could. 20 % (lower, smaller flowers) I left to see, if they can grow some more. Honey cream stacking up fast. Really fast flowering. But still has at least 2 weeks to go. Hope to get her to finish. Extreme good smell. Sweet, spicy, rich earthy aroma. Extraordinary creamy. Huge colas

💚💪🏻

Multiple clones taken at multiple times. 1 - Directly into soil, has been several weeks and no new growth showing 3 - In cup of water for ~ 1 week then into FloraFlex plugs w/ Clonex 1 - Into FloraFlex plugs w/ Clonex 11.04 - New growth but looks droopy - Top dressed w/ 1Tbsp of Dr. Earth Starter Fertilizer 11.12 - Corrected droopy leaves by keeping soil very very moist. Watered w/ left over CloneX and Recharge at some point. More new growth very everything is very bright green. Clones in FloraFlex plugs that were soaked in warer first are dying. Clones in FloraFlex plugs that went straight to plug has a root!!

Even though the temperatures have gone extremely to high for my liking this plant seems to love it. She’s a very resilient plant I highly recommend tho she strain to everyone. After I clear out my flowering tent I will put this bad baby into flower.

Her leaves are already covered with trichomes 🤩 as you can see the top cola is broken, but not completely. She was too tall so i supercropped it and tied her down so she couldn't stand up again. Other than that everything looks nice. No signs of any kind of dis balance ✌️

Candy 🍬