Day 32 - Heater was blowing directly on a couple of the leaves that turned brown. Cut them off. Raised lights up again. I think my development is a little slower than others but I have had a lot of trial and error. Day 33 - added tomato rack for LST. growing nicely. Day 34 - Stopped nutes as I was getting a little leaf burn in lower leaves. Looks good otherwise. Lights are dialed in. Day 35.- This is what too much light looks like. Day 37 - Switched to the grow light. Moved the heater. Growing nicely. Day 38 - Lights dialed in REDUCED water. Stopped watering for 2 days. Day 39 - Full Lights on now. Put more holes in the pot. Draining nicely now.

Day57 hot summer day 😎👍🙏 Day58 cloudy and normal temp 😳😵 Day59 cloudy and cold temp 😵😵😕 Day60 the sun came back but late 😩😵

11/17 Week 10 Ripley - Starting her on the Soul Peak very soon, low dose 5ml see how she takes it will reduce CocoTek on just her by 3ml/gal at that dose. Keep defoliating her gently, dozen of so leaves every day or so just to keep buds open to light. No visible problems Tara - The Beast - Ok now it officially the largest plant we have grown to date. With the pot its hitting 4 ft 8 in without 3 ft 2 in. The stretch has finally slowed to a stop and buds are beginning to quickly build... thank you God. I was really wondering what I was going to do next. Am going to have to bind her up a bit just for support tomorrow as those buds get heavy and she needs to give Ripley some room. Also cleaning the heck out of the lower end tomorrow. Keeping her CocoTek at current level with a Cal-Mag foliar every few days 1/19 Foliar Cal-Mag feed on Tara Cleaned out the bottom of Tara, first pass at least see how it turns out. Decided to put Tara on the same feed as Ripley see what happens as Ripley is building buds faster with the PK cant say that would hurt Tara, No def so may as well May be early but heck what do I know, on new ground here 1/20 So far so good, cleaned up Tara a bit and bound her up to give support and room for Ripley. Buds building nicely crap load of them Ripley doing well in the pK so will continue her protocol by slowly reducing CT and inc PK 1/21 Noticing some mag def on Tara and random Ca spots so getting a dose of Cal-Mag 3ml/gal as well as the foliar. 1/22 3ml/gal CalMag added to Tara feed reduced CT 2ml/gal Ripley on 5ml/gal CocoTek AB and 10ml/gal Peak getting her ready for flush 1/23 Going to try alternating between adding 3ml Cal-Mag to Tara's feed and foliar with same. Not a bad Mg problem but obviously one I cant ignore given its Ca as well. Ripley on 6.1 Water and 15ml/gal Peak one more day then flushing to start week 11

Did defoliation as usual and a little lollipoping. Did 2 complete refills of the reservoir, ph stayed stable for 1 day after the exchange but then super unstable again. Dropped the EC with the second refill to 1000 to see if it stays stable. Ori is going good, already looking frosty, NL#2 is comming aswell, NL#1 not so much.

9-3 Yeah yeah yeah, they all got a little light burn. Its fixed. Didn't realize I needed a diffuser. Oops 9-6 Growin great! Little small, but bruh week 2. 500ml with HP Connect. Added fan, plants need air to breathe.

Vamos bien la resina atope con la cookies #2 BUENA VARIEDAD

New start of a week FLOWERING This grow i have seen it all from giants to dwarf that doesn't want to flower to a mutant call mohawk ethos you name it i gots it's lmao couple week ago trow out a male but still all that don't matter because what i have is great to me maybe not perfect but i ain't perfect either 20/4/22 The smell coming out of the tent is one tropical garden very happy so far with results and there hopefully bulking up Will be posting more photos Tru the week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Kinda a leggy one. Leaves are okay, stalk not mis-colored, just trying to get the conditions right. I have other beans going, but this one seems to be lacking something. No, issues, so I’m not going to push it. We relocated the family to the basement. I have a trellis that is almost full and I think I’m past the point I needed to be. The temps are a little lower so we will see what happens.

Germinated for 24 hours in a glass of water, 48 hours in a paper towel and then I planted them into biodegradable seedling pots. Northern Lights looking a bit ahead of the Dosidos seeds but that was expected I’ve grown Northern Lights before and they sprout real quick. One of the Dosidos’ first true leaves is looking a bit wonky but we’ll see how it goes I suppose.

สัปดาห์นี้ยังไม่พบปัญหาใดๆแต่ก่อนหน้านั้นมีต้นที่ตายไปเกินจากแมลงกัดที่โคนต้นก่อนที่จะเปลี่ยนลงถุงปลูกก็มีบ้าง เพราะว่าข้าพเจ้าปลูกไฟแต่เอาไว้นอกบ้าน ใช้ลมธรรมชาติ อากาศสภาพบริเวณโดยรอบ ไม่ร้อนครับ แขวนไฟใบพัดไว้ดวงเดียวเพื่อให้ได้ชั่วโมงแสงเพิ่ม สภาพอากาศชื้นจัดแดดไม่มี เพราะอยู่ในหน้าฝนครับ เท่ากับว่าเราได้ความชื้นเต็มๆต้นก็ดูแลเหมือนจะโตดีเพราะความชื้นด้วย อันนี้ผมเดาเอาเองจากสภาพที่สังเกตุมาครับ 🤗🤣

Her new location better light spread for growth. November is considered the wettest month here and she is currently experiencing extra rain water and high humidity…so far so good.

So here's my first Diary. I'm a new grower just trying to find out what works best for me.

Start making flowers Adjust the light from 12 hours to 11 hours instead. Wait to observe the flowering Add LED lights to the lower part of the plant so that the lower flowers receive light.

Dopo un paio di prove con autofiorenti ho deciso di ripartire alla grande non riempio un box in questo modo da 5 anni non vedo l'ora 😍

They start to grow dense. iam very proud so far.

En una semana cambiaré a maceta de 7 litros

Trop Cherry #8 x BeeJayz hasn’t been topped, I transplanted the girls this week from a 1 gallon pot to a 3 gallon pot. Trop Cherry was in a plastic pot but now in a fabric pot. Plants seem to be growing well.