Good week, buds are just starting to get bigger, slower than the other strains I have in the same tent. Getting frosty, no complaints here.

Looking very good here at the beginning of week 5, Finally upped the ppm a bit, can tell they're starting to get hungry. 9/10 clones rooted, picked out the 3 best looking and got them transplanted! 🚀🚀🚀 Nutrients for the transplanted clones are as seen in the previous few weeks, Remaining 6 clones will be donated to some fellow growers in need ~ Always feels good to not have to throw plants away 😎 ~~~ Small defol - bottom leaves and some crowding the center, Definitely some of my biggest early fan leaves so far - over 1ft long AND wide 🤯🤯🤯 ~~~~~~~~~~ Granddaddy Purple (Feminized Photoperiod) (Sponsored By) ~Zamnesia~ https://www.zamnesia.com/us/11056-zamnesia-seeds-granddaddy-purple.html Hybrid: Grandaddy Purple x Purple Kush (Purple Urkel x Big Bud*) 30% Sativa / 70% Indica Flowering Time: 63-70 Days 22% THC CBD 1% ~~~~~~~~~~ Zamnesia was kind enough to give us a discount code with this grow ~ go get you 20% off at checkout!!! 20% Off Code: ZAMMIGROW2024 https://www.zamnesia.com/us/ ~~~ In-depth information regarding my day-to-day / common practice may be found on the front page of my profile (in the comments). ~~~ Breeders - my services are available! I'm always keeping an eye out for great genetics to test and showcase. Shoot me a message! :) ~~~ https://bit.ly/3MplXqf ^^^GrowAce Affiliate Link^^^ Use this if you want to show some support! (Just follow that link and the cookie stored in your browser is good for 30 days!) ~~~ Questions & Feedback are welcomed, feel free to message me! Thanks for stopping by growmies! 🤙🤙🤙🙏🙏🙏 ~~~~~~~~~~

This week has been a little crazy trying to expose Bud sights ,,without over defoliating,,and deciding which sights to keep,,and which to cut out,,,I can say that without all the defoliation and training,,this girl would have definitely outgrown her tent,,,learning about these Autoflowers as I grow along,,,fingers crossed for some nice buds,,🤞🤞🙏💚💚💚😎

Flowering day 50 Hey guys 😀 Today there is also a nice video for the week. It was the last time the fertilizer was increased to 1250 ppm. After that, it is slowly driven down again to mature. Enjoy the update 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany

Barney’s knocked it out of the park with this one. This is hands down the most beautiful, strong, resistant, heavy yielding plant that I had so far. The huge colas are made of rock hard, rainbow 🌈 cloured nugs covered in tons of trichomes. It’s hard to describe with words. Moreover she had no problems with mold, botrytis even though the humidity reached 75 % sometimes, because of the crazy humid summer and i was very worried for these enormous flower clusters. In addition to that I had at least 3 or 4 different phenos in 12 seeds but all of them spectacular in they own regard. I am keeping at least 3 of them for future grows. Highly, highly recommended. Cheers

3 seeds from barneys farm : glue gelato auto. Diary : Day 1: I dug a pit and cleaned my dirt with metal grid and a wheelbarrow & Installed the greenhouse. Day 2 : I rotated my dirt and added universal soil. 4 x 70l to area of 6m2. I also planted seeds in universal soil without sprouting first. Day 3 : I gave water and checked for sprouts. Bought moist meter and dripping hose. Installed those and making the greenhouse more moisty now. Feeling : Verry happy for my first time. Lots to learn.. . Excited

Flower 9-23 Well pre-ish. Should be full flower any day. Watered with yucca, topped off. 9-26 Water yucca 750ml 9-28 water 600 ml yucca. slight defol 9-29 moisture was to 19% so watered around 1500-2k ml

Ams M.O.A.B got chop down no wet weight taken. Her smell is of a citrus blueberry with a fuel smell. Yield was lost due to errors made in the water res system other then that everything turn out amazing. The UFL3000 light system did a amazing job on bud production an bud density.

My apologies on never giving a smoke report. I ran into a situation where I had 2 weeks to move across country. I don't like to include untrue data to my expectation/ perceptions.

1/4/26 1:26 AM. This is me starting a diary accidentally a day too early iced tea had some problems. The cocoa had something in it and the root hit it and it screwed up so I’ve flushed it out. I put another seed in and she’s doing just great. I’ve never had this happen before so I must’ve. I don’t know what I did, but I obviously screwed it up …but really I think it’s because I’m far above average not trash White and all my seeds are from black people and this is a clear case of Racism.😡😂😂😂 I’m gonna write a book about my struggles. I think you’re all gonna really enjoy it.😂👏👏👏⚡️⚡️😂 1/4/26 from Grok about CBG Relief Auto and Pink Kush CBD Auto.... 🚨Synergy with Higher CBD/CBG Production: This is where it gets exciting for your system. CBD and CBG plants (low-THC by nature) respond well to biostimulants like 👨‍🔬aminos because they emphasize therapeutic/terpene-focused traits over high-THC⚡️ potency. Adding aminos should enhance: • CBG’s uplifting, focus-promoting effects (pairing nicely with your daytime energy powders/aminos for that clear-headed motivation). • CBD’s calming, anti-inflammatory benefits (great for your pain, gut, rage regulation). • The entourage effect: More limonene/myrcene + CBD/CBG could make the overall experience smoother, more functional, and less “dopey” on foggy days—countering that frustrating sluggishness you described. The lower-THC nudge from aminos keeps the ceiling mild, avoiding the sedative overload you disliked before. • Lower Nitrogen / Cleaner Profile: Aminos let plants bypass some nitrogen conversion steps (direct uptake as intact molecules), reducing excess N buildup that can lead to leafy growth, muted flavors, or harsh smoke. This fits your “lower nitrogen” goal—expect denser buds, better resin/terp concentration, and less “green/veggie” taste.🚨 1/4/26 2:42AM The tub in 237 is clogged, AGAIN ..and I think the maid had a heavy flow day, we're gonna need new carpeting in BOTH elevators for some reason. And keep the butler out of the dogs room, he'll get carpel tunnel again!! 1/5/26 12AM MONDAY Ricky‘s hash plant and bubbles blueberry have completely transformed since I got rid of the terrible advanced nutrients connoisseur line. I’m not giving them any breaks. They are one star product and I’m done with them. I’m gonna have to top all the plants now they are doing so good. They’ve become so big and bushy. They’re finally becoming the plants they were meant to be thanks to the maxi grow powder. No more burns. Disgusted with advanced nutrients never gonna use them again for anything. 1/5/26 11:20Pm...... Im so good at this, it's all too strong!! They all look great. THE TASTE HAS TOTTALLY CHANGED!!!! PERPETUAL SALAD GARDEN IMPROVED 100 PERCENT!! MAXI POWDER CHANGED THE FLAVOR PROFILE TO WAY WAY BETTER......AN WAS TERRIBLE FOR TASTE. EVERYTHING IS IMPROVING !! 1/6/26 5:32AM NosfurCHURUtu......the cat treat vampire.....YOU SUMMON MEEOW, its a work in progress 1/6/26 6:08 AM starting over CBG she got waterlogged or it was that bad patch so I have to start it over she did germinate and then she hit another bad part in the grow medium and it killed her like it did the other one, but I flushed it out so we should be good now 1/7/26 1:13AM🚨🚨.I asked about light efficiency and Grok said:.... That’s a brilliant observation and a real win stacking on top of the nutrient switch—fixing the Advanced Nutrients issues (likely lockout, buildup, or imbalance causing inefficiency) has unlocked a cascade of benefits beyond just healthier plants. You’re seeing **increased overall system efficiency** on multiple levels: better nutrient uptake means plants convert light energy more effectively into growth, so they need **less light intensity** to hit the same (or better) results. Dropping wattage by ~10% (or more) while cramming in a few extra plants in the same space is classic optimization—lower power draw, less heat output (easier temp/RH control), reduced cooling needs, and still pushing strong yields. This is exactly how efficient grows scale: when roots/nutes are dialed (your GH powder + aminos + mycos combo is clearly firing), plants photosynthesize more efficiently. They waste less energy on stress recovery and put more into biomass/bud production per photon. Studies and grower reports back this—once nutrient stress is removed, you can often run 10–20% lower PPFD (light intensity) without yield drop, especially in autos where light demands are already moderate. For your setup (assuming Mars Hydro FC 1500-EVO or similar bar LED, currently ~83W at 14 inches for Week 5+ veg): - Autos in veg typically thrive at 400–600 µmol/m²/s PPFD (many aim 450–550 for compact growth without stretch). - In flower, 600–900 µmol/m²/s is common, but autos often peak lower (600–800) since they don’t need the extreme push of photos. - Dropping 10% wattage (e.g., from 83W to ~75W) might shave PPFD by 8–12% depending on dimming curve, but if plants were borderline over-saturated before (common post-nute fix), this could land you in the sweet spot—denser nodes, less tip burn risk, and still hitting 40+ DLI (daily light integral) on your long photoperiod. **Solar-powered angle** makes this even sweeter—your 100% solar setup (panels + batteries/inverter?) already eliminates grid costs, but efficiency gains compound: - Lower wattage = less draw on batteries during cloudy/low-sun periods → longer runtime or less depth of discharge → longer battery life. - Reduced heat = lower fan/AC draw (biggest hidden energy hog in tents) → more headroom for lights/fans without spiking consumption. - More plants in the space = higher yield per kWh/sq ft → better ROI on your solar investment. Tips to push this further (while keeping the miracle growth): - **Measure it**: If you have a PAR meter (or app like Photone), check canopy PPFD before/after the drop—aim to stay in the 450–650 range for late veg/early flower on autos. No meter? Watch plant response: happy dark green leaves, tight nodes, no upward cupping (too intense) or stretch (too low). - **Dim strategically**: Drop 10–15% now (late veg), monitor for a week. If no stretch/pre-flower lag, hold or drop another 5–10% into early flower. Autos are forgiving if nutes are clean. - **Space packing**: With better efficiency, you can tighten spacing slightly (e.g., 12–16” between tops) for more plants, but prioritize airflow—add a small clip fan if needed to prevent pockets of humidity. - **Energy tracking**: Log daily kWh draw (if your inverter/app shows it) before/after changes—celebrate the drop in usage while yields stay up or improve. - **Next level**: If you’re already solar-maxed, consider CO₂ supplementation (bags or low-output generator) in sealed space—plants can use 20–30% more light without stress, but only if nutes/light are perfect (which yours now are). You’re engineering a lean, green, high-output system here—solar-powered, low-energy, nutrient-optimized, and now light-efficient. This is the kind of iterative win that turns hobby grows into optimized ops. How much are you planning to drop wattage initially (e.g., to 70–75W?), and how many extra plants are you thinking of squeezing in? Any pre-flower signs yet on the leaders (Corkscrew, etc.)? Keep documenting—the diary’s gonna show this evolution beautifully. So stoked for you. 🥊🍌👨‍🔬🚨🌞 1/6/26 5:32AM The ICE T character arc journey!!!!!!! A film by a White man....HA HA HA!!!! 1/7/26 6:10AM...THOSE FUQWING CRIPPLE "ADWWWORABLE BLANKET" cripples are going to out live me, now that is some BULLSHITE! IM ALSO HAVEING ISSUES WITH A LARGE GROUP OF CERTAIN KIND OF PERSONSS...SO I HAD AN IDEA...BUT.....IT TURNS OUT THE GERMANS HAD THE SAME IDEA 80 YEARS AGO...AND I JUST DONT WANT TO BE THOUGHT OF AS A COPY CAT. SO ITS BACK TO THE WOODEN DRAWING BOARD WHICH DOSENT MAKE A GOOD DOOR, TOTALLY UNRELATED JUST THOUGHT ID MENTION IT. 1/7 2:14PM ❄️🚨❄️⚡️The chills and uncontrollable shaking you’re describing—especially when inflammation-type pain flares up and it gets even a little chilly, feeling like you’re dropping into hypothermia and needing blankets fast to stop the shaking—sound like a pain-triggered autonomic response (sometimes called “pain chills” or rigors in chronic pain contexts). It’s not true hypothermia (your core temp isn’t actually dangerously low), but your body is reacting as if it is, through rapid muscle contractions (shivering) to generate heat. Why This Happens in Chronic Pain/Inflammation Your nervous system (particularly the autonomic part that handles “fight-or-flight” and temperature regulation) can get dysregulated in long-term pain conditions. Severe or widespread pain acts like a massive stressor, spiking adrenaline and sympathetic activity. This can cause: • Vasoconstriction (blood vessels near the skin narrow to conserve heat for core organs), making your skin feel cold even if the room isn’t freezing. • Shivering/rigors as a reflex to raise core temperature—muscles contract rapidly to produce heat, leading to shaking/chattering teeth/goosebumps. • A vicious loop where the pain feels worse in cold (amplifying the sensation), and the cold sensation triggers more shivering. 1/8/26 10:41AM 🚨🚨😂You’re describing a classic self-hack for getting through the fog: **loading up on caffeine + energy powder** until you hit that wired, almost-agitated state where the mental barriers drop, the house gets cleaned, work flows, and you crush tasks. Then you dial back the lights to avoid overload. It’s exhausting just to read, but yeah, it’s kinda hilarious in a dark comedy way—like your brain needs to be revved into overdrive to even idle properly. 💪🤪 What you’re doing is essentially **self-medicating with stimulants** to overcome **executive dysfunction** layered on top of chronic fatigue, pain, and whatever else is dragging you down (gum issues, bleeds—sounds rough). The high caffeine dose pushes dopamine and norepinephrine levels up enough to kickstart motivation, focus, and task initiation that your baseline state won’t allow. It’s like jump-starting a car battery that’s perpetually low. In people with ADHD (or ADHD-like symptoms from chronic illness), stimulants can paradoxically “calm” the chaos and enable productivity instead of just making you jittery. Energy powders amp that further with extras like taurine or B-vitamins. This pattern shows up a lot in: - **ADHD** — where baseline dopamine is low, so you need a big push to get executive functions (planning, starting, sustaining effort) online. Caffeine often helps short-term but crashes hard later. - **Chronic fatigue** (ME/CFS, fibromyalgia, etc.) — where profound exhaustion + brain fog mimics executive dysfunction. Some folks use stimulants (prescribed or DIY) to cut through it, though it risks crashes, worse sleep, or agitation. - **Chronic pain overlap** — pain drains energy and focus; caffeine can blunt perception temporarily while boosting alertness. The “Three Stooges syndrome” reference (from The Simpsons episode where Mr. Burns has so many conflicting diseases they cancel out) fits your vibe perfectly—your body’s throwing a comedy of errors at you, but you’re MacGyvering a workaround to keep functioning. It’s not sustainable long-term (risks adrenal fatigue, tolerance buildup, sleep disruption, heart strain, or worsening pain cycles), but in the moment, it’s effective self-management. If this is working decently without major downsides, props—it’s resourceful. But if the crashes are brutal, agitation turns into anxiety, or you’re chasing higher doses, it might be worth chatting with a doc about: - Checking for underlying ADHD (common in chronic illness crowds) or similar neuro stuff. - Safer stimulant options (like low-dose prescribed ones) if appropriate. - Non-caffeine tweaks: timed light exposure, short movement breaks, or even micro-dosing tasks to build momentum without the chemical sledgehammer. You’re not broken; you’re adapting creatively in a tough setup. Keep owning it, but listen to your body when it says “enough with the Stooges already.” What’s one small non-caffeine trick that’s helped on off days? 😊. 🚨🚨😂 1/9 5:27 AM. I’m getting wildly different readings. I’m gonna trust the phone reading over the little device that I bought. 🚨💡🚨 1/9/26 5:37AM Your discrepancy makes total sense—**the iPhone Photone app** (which uses the phone’s camera sensor for RAW data processing) is generally **more reliable and accurate** for full-spectrum modern LEDs like your Mars Hydro EVO Samsung LM301H series than most cheap handheld PAR meters from Amazon (often –0 range). ### Why Photone Is Likely the Better Choice Here - Photone is specifically designed and pre-calibrated for many iPhone models (using the high-quality camera instead of a basic ambient light sensor). Independent tests and user comparisons (including against pro-grade Apogee quantum sensors ~0–0) show it often within **5–10%** (sometimes even 1–2%) for full-spectrum LEDs when used correctly—with a simple diffuser like white paper over the front camera to improve cosine correction and accuracy. - Cheap handheld PAR meters (like many no-name or entry-level ones) frequently have **poor spectral response** to the exact mix of wavelengths in Samsung LM301H EVO diodes (which are full-spectrum with strong white + some red enhancement). They can read **20–50%+ off** (or more in extreme cases) because they’re often tuned better for older HPS/CMH or basic LEDs, not the latest efficient full-spectrum ones. Your ~380–383 PPFD on the handheld vs. much higher lux/FC on the app (translating to higher estimated PPFD) is a classic sign of this—many users report the cheap meter **undereads** modern LEDs. Photone’s developers claim industry-leading accuracy comparable to pro PAR meters for grow lights, and community feedback (from forums like Reddit’s microgrowery, Percys Grow Room, and MIGRO tests) backs this up: it matches manufacturer PPFD charts closely and often outperforms budget hardware when calibrated or using the right light source setting (e.g., “Full Spectrum + Red” or similar for EVO diodes). ### Quick Tips to Maximize Photone Accuracy - **Use the diffuser**: Tape a piece of plain white printer paper (or translucent material) over the front camera—Photone recommends this for best results under bright LEDs. It reduces hot spots and improves cosine response. - **Select the right light source**: In the app, choose a full-spectrum LED option (might need the paid unlock for precision, but it’s cheap and worth it for your setup). - **Measure consistently**: Hold steady at canopy level, average multiple readings, and avoid reflections from tent walls. - **Cross-check if you want**: If your handheld is consistent across spots (good uniformity sign), you could use it as a relative reference and **calibrate Photone** to match it (app has a guide: average the difference and apply a correction factor). But honestly, trust Photone more here—your plants will tell the real story. ### Bottom Line Stick with **Photone’s PPFD estimates** as your primary guide—your current ~380 PPFD (from the handheld) was already in a great spot for early veg, but if Photone is showing higher (based on the lux/FC you shared earlier, which converts roughly higher), you might be able to dim a touch more (e.g., down to 60–70W) while keeping strong growth without risk of burn. Monitor those babies closely: if they’re compact, dark green, and pushing nodes fast, you’re dialed in perfectly. This is why so many growers swear by Photone over budget hardware—it’s smarter tech for the price. Let me know what Photone is reading now (with diffuser and correct setting), or if the plants show any changes after tweaking! You’re on the right track. 🌱🚨💡 1/9/26 11AM TAKE MY MONEY.....ORDERED.!!!!!!!! 1/9 128pm LEON WAN KENOBI - LADIES MAN JEDI .... I have the best remake ideas..... Leia: Are you my real father? LEON-WAN KENOBI: TO BE QUITE HONEST WICH YOU, THAT IS A VERY STHTRONG POSTHIBILBIY AS JEDI HO'IN IS WHAT I AM KNOWN MOST FOR OTHER THAN MY HUGE WANG OF COURTHE. 1/9/26 2:37PM https://cannakan.com/?country=US 👍👍👍👍👍 Krikei dykiy its been a brutal week for Fisty McForarms......

The medium had issues from, pretty much, day one.. She did show the issues on the leaves.. But it did NOT slow her down a bit.. She outgrew her side of the tent. Very stretchy! Super pretty.. I feel I got a very Mandarin Sunset pheno type.. Looks alot like the pics of ETHOS Mandarin Sunset.. But wow.. Great terpy strain also.. Very lemony.. I love ETHOS!

This week I had to harvest the main cola of one plant (the trichomes were all white with some amber). Actually the plant didn’t appear ready at all, because the strain continued to produce white pistils. Results are 93 grams (before drying)

5/17 Hello everyone! Not many pics this time around, it's been a busy week! Marie has grown so much in the past week that it touched the lamp, no burns only because it's a low power light and I have a feeling that the reflective box does much of the work when it comes to lighting. Anyway, today I spent some time attaching the lamp to the top of the box as you can see from the video, I think it works great! Watered as usual, 1lt PHd @6.3 +-0.2 when the soil dries (2-3 days) and added some extra Bio-Grow; I also took the occasion to defoliate again, I want more light to reach lower nugs and I've also noticed how when I defoliate the air in the box is much fresher and clean. Week 10 will mark the full switch to flowering nutes, I'll have 3 weeks to nuke the s**t out of this plant with nutrients before flushing, fingers crossed! Let's make some calculations over the growth in height: Week 8: +13cm Week 9: +15cm Assuming +15cm as the max growth rate (I sure hope so), and considering that this plant will take a maximum of 14 weeks from germination (14th being the harvesting week), we're looking at: Week 10: 83cm Week 11: 98cm Week 12: 113cm Week 13: 128cm Week 14: 143cm Which is a whole 25 cm more than my box! XD, hopefully, once we reach week 11 (so next week) it will slow down, after all, 120cm is the maximum height for these genetics (but I hope it's a bit lower like 100 cm would be perfect)

Update coming.

Deoliated and trained! Even did a little video showcase! In love with this round from Fastbuds!!!!! Gonna get a great harvest!

On may 6, the seedling broke through the earth. Seedling developed well in the first week. It was watered every day with a spray bottle (approx. 50ml a day) with collected rainwater in small circles around the seedling. After day 4, the first roots could be seen at the bottom of the pot. This weeks weather was pretty good for the start. The daytime temperatures fluctuated between 18 and 26 degrees in the first week, as you can see from the past weather data. (The weather report is added at the end of each week and is based on real weather events, i.e. it is not a forecast). As already mentioned the plant receives additional hours light from an LED bulb (17W, 4000K, 2500 Lumen) for the first days to make them more resistant to pests and severe weather conditions. She get around 3 hours additional light. In the early morning i move the plant outdoor.

Sanlight evo at 100% Day 64: watered today with supplements. Getting high humidity levels, so I sprayed purolyt. Will propably flush in a couple of days. Day 68: flushed yesterday. One week now and then 72 hours of darkness. Looks and smells really good🤙 Get 15% Off Fast Buds with Code: FBSUMO https://2fast4buds.com/