The Grow Awards 2026 🏆
Likes
Comments
Share
@gr3g4l
Follow
Una vez pasados los dias huele bién, sabe bién y buen efecto. Matices y aromas Terrosos , café y a cítricos. Fácil de cultivar.
Likes
6
Share
@Fyno_TH
Follow
🌸 Flowering Week 1 — first week after flip! Both girls officially entered bloom and are starting to show early pistils. The stretch already kicked in and the canopy is filling up nicely under the Spider Farmer G3000 💡. This week I noticed the first signs of powdery mildew (PM) 😬 — just a few small white spots on lower leaves and shaded areas. Immediately dropped RH and started preparing to treat it next week with Hydrogen Peroxide 3% (H₂O₂) foliar spray. Feed mix (per L): • Corex 1 ml/L • Terra 0.4 ml/L • CalMag 1 ml/L • Mira 0.2–0.5 ml/L (pH adjust) • Bud Candy 2 ml/L • Terpinator 5 ml/gal (~1.3 ml/L) • Florex 0.5 ml/L • Aurora 0.5 ml/L 💧 Watering around 15L per plant with 10–20% runoff. PPM ~1350–1450 @ pH 6.0. Plants are still praying strong, no major stress visible 🌿. 🌡️ Environment: 26–29 °C (day) / 23 °C (night) 💧 RH: 50–55% 📝 Observation: PM just appeared this week — I’ll continue with Hydrogen Peroxide 3% foliar spray in Week 2 to kill and control it. If anyone has other proven PM-fighting tricks for coco grows, feel free to share 🙌. Excited to see the stretch continue and bud sites start stacking next week 🌿🔥
Likes
7
Share
@fabialien
Follow
Lunes 11 de marzo 7 am de 2024: Se dejaran hidratando las semillas por 24 hrs. Martes 12 de marzo 7 am de 2024: pasamos a papel dejamos por 24 hrs. Miércoles 13 de marzo 10 am de 2024: revisamos las semillas y vamos preparando macetas pequeñas para transplante. Miercoles 13 de Marzo 3:30 pm se traspasa a tierra. Viernes 15 de marzo 11:47 pm 2024, ya que abrieron bien se pone bajo lámpara 100w a 30 cm de distancia, tienen domo protector! El lunes en la nueva semana subimos el avance, hasta el Lunes... Sábado 16 de marzo 2024, de las 3 semillas la 1 ya abrió completamente, 2 y 3 están por abrir completamente.
Likes
8
Share
Plants are still thriving well. Watered after topping w/ proper rate for week for according to schedule PH water to 6.2 and soak pots. Temp stays high above 75 degrees humidy same until tent is opened led at 50 percent about 20 inches away
Likes
19
Share
Último día del año y último día de la semana 9 de las bebas. Está semana que entra sería la última de la white quizás llegando a fin de semana corte solo las puntas y dejé una semana más los bajos o en caso que le falte la esperaré una semana más (creo que es lo mejor) viene muy compacta y olorosa, resina no veo tanto como en blue moby que viene con menos producción pero que dejó en segundo y tercer lugar a las otras en producción de resina le quedan 2 semanas veremos cómo sigue evolucionando pero estoy fascinado. Moby dick viene atrasada pero avanzando de a poco espero que no quede estancada y me quedé flaca seguro se atraso por el estrés de que se cortó su punta principal hace un par de semanas pero bueno creo que vale la pena esperar a todas!! Desde lo personal les deseo que empiecen un año mejor al que paso y que les traiga más lindas experiencias con el cultivo y los más bellos cogollos, un avance hacia la legalización en dónde todavía se les prohíbe está hermosa planta, felices fiestas y próspero año nuevo! Buenos humos! 🙏💪
Likes
6
Share
After you found some good sector and clone it you let the mycelium grow and fill almost all the petri dish like I did last week. So now you're ready to move forward. Making grain spawn!🍄🍄 For grain you can use Organic Rye Berries, but you can also get away with wheat berries, or brown rice or even corn kernels(which I used myself) ! And you'll need some mason jars or honestly I used some jars that I had home just clean them very well and sterilise before using Making a grain spawn can be broken down into 6 easy steps. 🍄Hydrate Grain By Soaking 🍄Make Specialized Lids 🍄Simmer, Drain and Dry The Grain 🍄Sterilize 🍄Put your agar in the jar 🍄Colonize 🍄Soak the grain by placing it in a bucket, covering in water, and leaving it for 12 -24 hours. Easy. 🍄Drill 1 hole on top of the lid. Right in the center and cover with a small dab of high temperature silicone sealant, and leave it overnight to dry. And your jars are done. There other diff types for different methods like liquid culture etc. But I'm just going roughly through what Ive done. 🍄The next step is to simmer the grains on the stove. This will thoroughly hydrate the grains, and will soften them to make them easier for the mushroom mycelium to consume. Cook soaked grain on the stove for about 15 minutes. You don’t want to cook it too long, because eventually all the grain will crack and you’ll get some mushy grain spawn. We don't want that. 🧐After the grains have simmered on a low boil, you’ll need to drain them off. What I did is I drop them in the sink with the drain cover on. The grains will drain over an hour or so, after which you can go ahead and fill your jars. 🍄Once your jars are filled, they need to be sterilised.This kills off all the other nasty contaminants in the grain cover the lids in tinfoil (to prevent water dripping into the lid) and then just pressure sterilise them for about 90 minutes at 15 psi. 🍄After that let them cool down. Get your SAB, wipe down the walls with some alcohol wipes and place the jars inside. And wait untill they will be warm to the touch... not hot and painful 😤patience is key. Bring in your plates that had been stored by you in a dark place. And what u have to do is sterilise your scalpel and just accurately and efficiently decide your mycelium into about 10 pieces and quickly place them in your jar. And complete for every jar u make. You have to be very quick. The more you keep you're jar and your agar plates lids open the more cans they will get contaminated. There certain technics you can see online.. 🍄Ones you're done close all your jars lids tight and Jake your jar so the mycelium pieces will mix around the jar and place them in the dark place to colonize. And just keep waiting... 😅 Untill the mycelium will conquer your grain. Keep your eyes on the jars, any weird smells or colour during the waiting time.. because that would mean you got a contamination going on. Oh yeah and when about 55% of your jar is filled with mycilium shake the sh*t out of it so it will break the mycilium inside and make spread more faster.
Processing
Likes
2
Share
@sanchelos
Follow
ростишка радует,замечаний нет,Шишка живёт со мной в комнате,вазон установил за системным блоком дабы создать обдув!
Likes
27
Share
Cleaned up the #10 mother, with some defoliation, and LST! She's getting ready for her adventure outside this summer! Took more clones from the #4 mother, and cleaned her up. Happy growing! :)
Likes
34
Share
The RainBow Sherbet really have everything in its place, they are beautiful plants, one was planted a few days later because a little sister damaged by the placenta was replaced, but we are talking about 4 (5 days of difference between the two, nothing special, I will not have to do hrvest on the same day. Growing projects for autoflowering plants ----- As for autoflowering plants, I really love preserving the Main Cola. So I will try to make the plants grow well or badly without damaging the main cola. Nowadays, topping autoflowering plants is very accepted but it is not my favorite thing to transform a baby born to finish in 10 weeks into a baby who finishes in 14, I say at this point I do photoperiodic. But in times of people who only grow autoflowering everything is permitted for goodness sake if you want to do it, do it, I will not be the one to stop you. Also because the results are excellent, nothing to really discuss about anything except time. All this to tell us that I recommend for example fimming on plants that tend to grow tall to give power to the side branches, LST as much as you want, I don't like too much, I need space. HST and splitting are with experience. These are my tips not the absolute truth please do not mistake me for a great sage holder of the truth I speak as I see it. The first week went only with Power Roots 1 Ml/l and Pure Zym 1 ml/l from now on we will start with ALga Grow. The plants were transplanted shortly after germination because the biodegradable pots were very small. The soil is Plagron Pro Mix 100% organic renewed with 30% new soil and 20% Perlite added. (Pro mix does not have perlite but is airy, we added it anyway) Plagron fertilizers are available at Zamnesia in convenient Pack formats for all growing styles. I used this one with a simple search you can find the other products. ---- https://www.zamnesia.io/it/12119-plagron-top-grow-box-100-naturale.html Try a seed of this variety that drives us crazy... ---- https://www.zamnesia.io/en/11230-zamnesia-seeds-rainbow-sherbet-automatic.html Description Zamnesia // A cross between Pink Guava, Sunset Sherbet and a hint of ruderalis, Rainbow Sherbet Auto offers a wide range of flavors, effects and more. This 70% indica-dominant strain reaches considerable THC levels (24%) and is suitable for both experienced growers and those taking their first steps in the world of cannabis cultivation. Growbox and Air System - Secret Jardin DS120w + fans + exhaust fans and DF16 filters kit ---- https://www.secretjardin.com All the best that mother nature has to offer is at ----www.zamnesia.com Collaboration request: I am available for collaborations with companies of lights and various growing equipment (please no seed and nut companies) I would like to renovate my 120x120 space that has slightly outdated lights and would like to try some controllers. If you have any proposals available.
Likes
8
Share
6° Semana- Aeroponía - Están muy bellas las raíces, están 100% sanas. Se realiza poda apical al quinto nodo,una pequeña defoliación y luego se aplica LST a las más grandes, muy contento con el crecimiento actual. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 6th Week- Aeroponics - The roots are very beautiful, they are 100% healthy. The fifth node is topped, and a little defoliation and then LST is applied to the largest ones, very happy with the current growth.
Processing
Likes
2
Share
I chopped it down today, which is day 74 from sprout. The trichomes were looking partly amber/purple and all cloudy. The smell is pretty overwhelming of berries and cream. It's a unique smell and I can't say I've smelled another cannabis plant similar to this. This was technically my first full completion in my all new setup, so I expected it wouldn't be perfect. The pictures speak for the genetics itself, but there were some funky things this plants did, and I have a 2nd blackberry plant from the same batch of seeds that's doing the same oddities, so not sure I'm 100% sold on autoflowers. At the end of the day, I'm happy with my choice and happy I didn't kill the plant! LOL I don't think it's going to be more than an ounce or 2, but I'll report back when it's dried and weighed. 😀
Likes
2
Share
Day 21 of the Auto Fractal on this plant will not do topping as she stayed a bit short for now but will do LST.This week will add more the ppm as soon they start flowering.
Likes
12
Share
@MrGoonai
Follow
12/12/24 Short Facts: Watered: 1 x 2.4L, 1 x 2.5L, 1 x 2.5L — Total: 7.4L VPD @ 1.4 Light @ 70% (~700 to 950 PPFD) Stopped watering with fertilizers, only water, CalMag and Silicia Force --------------------------------------------------------------------------------- I’ve stopped watering with fertilizer because I’m planning to harvest her in the coming days. You can already see that she’s slowly dying. I hope she’ll put all her remaining energy into her flowers in these final days. I’m going to dry her, but only because there’s a new method I want to try. You can now place the harvested buds into a special plastic bag immediately after harvest. These bags are designed to let water out while preserving the terpenes almost completely intact. One of the German grow shops selling these bags tested different samples in a lab, and the results seem to support their claims. If it works, great! If not and the harvest ends up molding, I don’t mind. 98% of the harvest will already have to be trashed due to the legal limit.
Likes
10
Share
@Naujas
Follow
The girl looks really good, strong thick branches, which I wanted to bend a little more, but I don't have the space for that :D :D The girl hasn't started to show her flowers yet, but I think that in a few days, it should appear :) good luck to everyone.
Likes
190
Share
@Burmese
Follow
Hi everyone, Here’s the update for week 6 along with a video. Soil(Organic grow) Day 35~42 She becomes alot bushy and start showing pre flowers this week.Continue LST and all going well.I just tuck-in the fan leaves under the strings.The space become so tight.You can see in my video.Most of the bud sides are visible to light.Only some are covered by fan leaves.So I am still thinking about defoliation.May I know your opinion about defoliation auto? Here’s my nutrient solution giving for this week. Soil RO water EM leaf solution- 1ml/L Egg shell with vinegar- 0.5ml/L Epsom salt- 1tsp/gal pH- 6.1 ppm-200 Run off pH- 7.0 ppm- 1300 Coco(Synthetic grow) Day 35~42 Huuuuuh... Coco made my grow so difficult.I made alot of rotation this week.Coco #1 is now fully recovered in 1 gallon pot and Coco#2 seedling is not well.I transplant Coco #1 into 10 gallon final pot again.So it’s like 1gallon soil to 10gallon Coco.I don’t know why she can’t thrive directly in Coco/perlite mixed.She needs a bit touch of soil to recover.From now on golden days are coming.I Hope so.She will be introduced to my ScrOG soon as you can see in my video.Here’s my nutrient solution giving after transplanting. Coco RO water G/M/B- 0.5ml/L B52- 0.5ml/L Voodoo juice- 0.5ml/L Cal-Mag Plus- 0.5ml/L pH- 6.2 ppm- 250 Run off pH- 6.8 ppm- 750 Stay tune guys.. Happying growing to you all... ✌️ 🇲🇲
Likes
3
Share
*Sorry for lack of photos in this first week* Hi there, welcome to the first week of the Fastbuds Gorilla Cookies grown under the ts1000! You may see another plant in the tent, that is also Fastbuds but their new for 2022 Cherry Cola Auto strain. I'm going to try my very best with these plants, currently at seelding stage receiving around 270 ppfd each and dli is around 20 for 24hours of light. When the plants are bigger will increase the amount of light.
Likes
3
Share
Not going to grown this one so soon. There are plenty of better option from this seed bank. Could not reach buds as good as they ones from hulkberry. It's a bigger plant with more banana like buds and not so dense and round. But still a strong high and enjoyable smoke.