Ok so I’m not afraid to say 7.7oz shocked me on the wet weight, I had a goal of 1oz dry being a first time grower, factoring mistakes, this and that so I guess we’ll see if what comes as I read up to 75% in weight can be lost in drying and curing….so fingers crossed I hit my goal 🤞 I harvested based on the 1st photo, I cut a small piece of bud off the main cola at the bottom to really check it under a scope and saw red headed trichomes, so checked the lowest flower and had the same results (photo 1), this was after I’d asked a question earlier based on a photo I took on a leaf and was advised to check the buds instead…so thanks for that info there 👍 Also a big thanks for the comments the looks at this diary. Really looking forward to the next couple of weeks and seeing how the rest of this little venture pans out…I guess we just have to stay tuned😊🤘🏴󠁧󠁢󠁷󠁬󠁳󠁿 12 Oct 2021: Harvested 16 Oct 2021: Plant seemed completely dry today which surprised me a little so I snapped stems and yus sir they were ready to be trimmed down….icky sticky, earthy, diesel, piney smells were the hints that were hitting me as I was trimming away, I have a lot of airy buds, which is on me! As a First time grower, until I actually got growing and started to understand the complexity and importance of keeping cannabis growing in stable conditions with par values on lights, feed schedules, trying to keep negative pressure in the tent with passive intake vents, adding lights, humidifier, dehumidifier, more fans…a learning experience indeed and not one I’ll be shying away from. Anyway there’s me blabbing on…..dry weight time 👀 38g/1.3oz and roughly 13g trim so I am extremely happy that even though I’ll probably lose about 8% of this during the cure, I think I made my 1oz goal of smokeable bud 🤘😊🏴󠁧󠁢󠁷󠁬󠁳󠁿 A smoke report is due in 4 weeks when it’s had a bit of time to do what it needs to do!

05/19/2020 All going well, have to grow in containers this season, I might be moving before harvest so only veggies in the ground. But all are adjusting well 😊 I will give more details on individual plants shortly #1 is10" tall new growth looks good getting thick. #2 is 11.5" tall #4 is 7" tall but healthy #5 is 16"

Care Bears was an awesome plant to grow, it grew fairly smaller but massive colas on the whole plants. The fruity smells that come off this plant is amazing but also has a hint of that good old dank smell, awesome purple/pinkish colours off of it . Highly recommend growing this strain is you haven’t already. Breed by: firebuds genetics

Radical Juice Auto – final veg update 🌿

Why uploading videos error?? Up 100 error 100!!!😭😭😭😭

Graduated, and am off from work for a few weeks, so went overboard on photos. Plant is doing well, leaves are starting to turn yellow (strain trait). Can't wait for the harvest and being able legally gift my xmas ornaments to my cousins during our "cousins walk" at our family xmas party.

sept 16th

420Fastbuds-Week9 Strain:FBT2313 What up grow fam. Weekly update for these gorgeous girls. They're definitely getting close to being done and getting the chop. I did a defoliation this week to allow the light down to the lower bud sites. All in all Happy Growing.

So with Christmas and an extreme cold front I got busy and am posting late this week. Got the pictures and videos on time though. So still fighting phosphorus deficiencies a little. That is why I am adding a pinch of Kool bloom to the mix when I feed. Seems to be helping so long as I don’t over do it. This tiny tiny cup is tough to keep balanced. If I do this again I will invest in IV bags and put it on a constant metered drip. Buds are getting a little larger and making so that is good. It is by itself in my seedling tent right now so it is easy to tell it’s that plant starting to smell nice. Let’s see where we land next week. She will make at least some smokable bud at this rate, not much but it has been fun.

Cut 2 leaves x plant

Grow geht langsam richtung Ende. Leider zu kleine Töpfe benutzt aber was soll man sagen ist mein erster Grow

Everything went ok this week. They seem to still be drinking ok but not as much. The flowers are hard dense. I also notice the smell isn't as strong a week ago. This week I downgraded the tea to just molasses and my diy compost.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Hi guys flip day Sunday 6pm 12 hours lights off starts 🤞😀💚 I will be using a autopot system this grow.

Put banana peels on the soil and cover with more soil, they are almost flowering 🍁🌺🌺

Hallo zusammen 🤙. Habe sie heute geerntet. Wir sehen uns in 3 Wochen mit dem Ergebnis wieder. Bis dann 🤙

Actually week 5. Looking great so far

Here it is...Fucking bomb id definitely grow again Sadly this was a single bag seed it did HERM but late in the game so the seeds it did make which there weren't many are white and empty....got clones of his jet fuel so we will see the similarities.. Gave me about 3 ounces. Been smoking on it hard so hard to tell hahha aging well has a grapefruit smell that does not inhibit the taste which is fresh flowery chronic similar to a skywalker but much lighter