Recommended
Likes
Comments
Share
Eccoci qui... Ormai manca davvero poco ci siamo quasi.... Ora niente più fertilizzanti solo acqua ed attendiamo la maturazione.. Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️
Likes
30
Share
Last week of flowering (72days from the light switch) Gonna cut soon when the dirt is dry. A quite late harvest. Many buds denser more, and stem can’t longer resist. This season so satisfy. Thank for all mentor and comment. You all are my inspiration for grows. Feeding 23/1 Water 13.5L+Flawless 20ml ppm80 ph6.2 MDR 3L 2Lx5 Runoff MDR 1400 /1155 Zkittle 1600/1300/1150 Pineapp 900/600 Purp 1300 /1200 Sapp 2000/1100 Dozdos 1100/1000 25/1 10.42 6L ppm9 ph6 1L per pot 3L+Flawless6ml ppm116 ph5.9 1.5/1.5 Purp, Zkittle 4.5L+ Flawless7ml ppm119 ph6 1.5/3 Sapp,MDR Runoff Purp 1300 Zkittle 1500/1200 Dozdos 1400 Sapp1300 Pineapp850 MDR950 27/1 runoff Pineapp 500 Purp 900 MDR 600 Zkittle 400 Sapp 300 Dozdos 400
Likes
28
Share
Hey everyone 😃. This week she has done great 👍. It was done again on all the drifted topping and sprayed one last time with neem oil so that the last trips are finally gone 😁. We haven't had any pests for so many years and all of a sudden we have such little shit parts 😅. This week it was poured twice with 1.2 l of water. GHSC enhancer was added during a pouring (1 g per l) The tent was cleaned every day this week and the plants were checked for health. The humidifier is filled once a day. Next week I will decide how I will continue the training because I have space again in the flower tent 😀. Until then, I wish you and your families a good start into the new year 2021 🙏🏻. Stay healthy and let it grow 🍀 You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/115-amnesia-haze.html Type: Amnesia Haze ☝️🏼 Genetics: Original Amnesia Haze 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
18
Share
@ZigZag32
Follow
Great growth this week. She is looking fine, really strong pheno from great genetics. Starting to give off a small scent. I’m feeding every 3 days at the minute.
Likes
20
Share
@Chubbs
Follow
420 Fastbuds FBT2305 Week 6 This week has been exciting for sure. Both have definitely transitioned into flower now, showing flower sites everywhere.Had some calmag issues but I think we got that under control by upping the feeding to 1tsp per gal. Over all I'd say Happy Growing.
Likes
17
Share
@Optimus
Follow
Germination: wet cotton pads in a zipper plastic bag. That's my third grow, got a much bigger 5x5 tent and a new LSD light. Reminder to myself: NEVER EVER try to grow seedlings in PEAT POTS! If they are covered by humidity domes - they are constantly moist and could get mold. If not covered - they suck all the moisture from the soil! Plus, peat is highly acidic: (pH 3.5-4.5) 26/10/22 A couple of seedlings almost died in 25C/60% conditions after not watering for 24 hours. Withered severly! Repotted immediately.
Likes
14
Share
@Dunk_Junk
Follow
Wow... She's really entered flowering this week! I've had to bend over her main cola so is could receive light as opposed to growing above it 😂 😕 Also she's been stretching like crazy. I have backbuilt quite a few bud sites. We will see in the coming weeks how effective this has been.
Likes
6
Share
🌱: top dressed her with some Dolomite Lime 💧 : 6l 💡 : Dli: 45 mol/m²/d 🤔: Day 67 back from mountain biking. I think I overdid it with the watering before the trip, and my vacation replacement was also too generous with the watering and didn't allow the soil to dry out. The CalMag problem, or whatever it was, could also have been caused by the new, more powerful lights, even though I added 50g/20L of dolomite lime to the soil when I started the grow. That was sufficient with the old lights.
Likes
21
Share
This week will be the Last week probably, I just flushed them and will not water them any more. I Put the lightcircle down from 20 hours to 18.
Likes
24
Share
@m0use
Follow
***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Ok big update this week, I finally edited the footage of the lights and got their unboxing photos processed, this took way longer then expected and should have been done on germination or week 1 entry but better late then never. You can really see how the lights shine in comparison to my older ones. The brightness of the leds is next level and I can use their V1 spectrum from seed to harvest. Its a great balance of red and blue in a full spectrum light. The medic grow mini sun 2 is a all purpose light that I can see myself getting lots of use out of in the future. Plus they fit in my tent just as snug as my last ones and that's a big thing for me, I don't like dim corners. I am using the lights at 80% dim level. this will be raised to 100% when they enter flower :D First time useing lights I can dim. they also have an onboard timer attached to them, I will be playing aorund with this to see if its something I want to use in the coming weeks, I all ready have all the external timers so I can see how this is a useful tool for anyone starting off without them. On top of all this I also transplanted my plants into their final pots. they went from a .7-.8L to a 2gal or 7.5L, all the root balls on the plants where perfect, nice white roots, maybe a bit compacted for the size and might explain why I am having some issues with them but healthy none the less. I think they will not start to grow a bit better and I will see less issues moving forward. I still have yet to get a new PH pen but I am blindly guessing the PH by adding 2 drops of phosphoric acid ph down per 1gal of feed solution. it seems to be working out just fine. Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.emeraldtriangleseeds.co.uk/ Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/OriginalETS/ Twitter: https://twitter.com/medicgrow + https://twitter.com/emeraldseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/emeraldtriangleseeds/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/emeraldtriangleseeds https://growdiaries.com/seedbank/emerald-triangle-seeds
Likes
2
Share
Likes
40
Share
@xbrico
Follow
***New Addition*** Day 82 - Big tank change out. Had a massive drop in pH while EC rose some again (Only been adding RO water the last few days to keep tank in check around EC1.2-1.3, had jumped to 1.6. PH Drop was from 5.9-6 to 4.9-5.0 from it being stable for 4-5 days). After epsom salting the leaves last week, still noticing some lower leaves "Praying" and some dead and drying ones hanging from the plant. Its getting to about the mid-way point of the plant now (again, all that's under the scrog but...) but getting too close for comfort!!! Have edited my formula slightly for this change out to: *2ml/L Bloom A & B (So 100ml of each in a 50L tank) *1ml/L Silicon *0.6g/L Epsom Salts *1ml/L 9/18 PK Warrior (This was a f**k up, should have been 0.5ml/L - hopefully doesn't impact or isn't the cause for Mg issues - causing a lockout) 2ml/L Sumo Active Boost 2ml/L Fulvic Acid 2ml/L Sensizym 2ml pH Down to bring the lot to pH 5.7-5.8 This brought me to about 1.6EC, pH6.4 (Expected value was 1.521 from Hydrobuddy Calc for the * ingredients - My water bases at 0.2EC so a close enough calc!!!) - Higher than I have been putting in but i think most of the EC rise is from the Sulfate in the Epsom Salts (The Sulfur alone is about 0.32EC). Also, with it coming late autumn and the tent in an outdoor cabin, got a temp controller to bring on a heater to stop the temp dropping below 16.5C...its now averaging out around 18.7 during the night so that's decent enough (Was potentially getting sub 15C - recent day temps have been 9-11C so could have been pretty chilly in there!!!). Also put my aquarium heater in the tank to bring the solution to around 19C as 1 of the plants has grew an absolute root mass into the tank itself - It is defying the Smart Pots and getting itself into there even after a pruning a few weeks back!!! So, tank change happened a few days early but what the hey...passed the time with a hot whiskey or 5!!! :P ******************************************** Day 78 - Really haven't done anything with the girls the last week. Just been topping up with pH adjusted water, bringing down the nute strength a bit as they're taking on water but not really taking on any nutes. General monitoring. Think I am going to have to get a heater out in the cabin as the night (IRL Day temps) are getting 15C and below so worried that could be impacting some nute uptake - Gave them an epsom foliar last night and then the bi-weekly Geisha foliar spray just before lights out this morning. Apart from that, nothing new. Happy growing all.
Likes
6
Share
@Headies
Follow
First I soaked the seed for16 hours. Then I put them in a moist paper towel until they sprouted a tail and I placed them in rockwool. Day three I put them in rockwool. I shot for 50 ppm and put a drop of unsulfured molasses in the water for germination.
Likes
20
Share
Frosty Frostbanger isn't growing any taller. I started measuring the cola today for height and width. It is 10 inches tall and I am not really sure how one determines its width. I took a picture and will ask a question to someone who is more experienced than me. I plan on entering this cola in a contest, however, I don't really know what I am going up against. :)😬 I have continued to feed my plant on a regular basis. It has been hot enough here in this area that I water/feed on a daily basis. We have a few more weeks to go until its harvest time. I am curious to see how big the buds are going to get. I can definitely see the dense, tight, resin-soaked buds that glitter like fresh snow in a sparkling winter wonderland as per its description of Fast Buds. . Buds also appear to be very compact. And, it is definitely putting of a super strong smell. That's all for now, Stay tuned for more news next week. Susquihanna
Likes
22
Share
@coriander
Follow
Day 99 - Finally got to chop a plant! Chopped the cheese, did a rough wet trim and hung it all in my diy drying chamber (see video above). I knew I was going to be chopping one before the other, so I threw together a cheap unit out of a garment box I bought from a moving company. -It came with a cross bar, so I cut the box and re-taped it the way I wanted it, to conceal everything proper. -Then, I drilled some holes in the sides for ventilation and taped some carbon filter from my air purifier overtop to keep pests and dust out. -Outside of the box, I've got a Coway air purifier pulling out the smell and adding a bit of air circulation (pulls air passively through the vents in the sides) . -For added flair 😉, I threw some velcro on the flaps and built a thermometer/hygrometer into the front to keep an easy watch. They will hang from some clip hangers I grabbed, for a week or so, or until they're ready. Then I'll do a dry trim and time to cure! Super Lemon Haze is still plugging along and getting dense. Smells great, and although the leaves show a past of issues, the buds are looking amazing. Can't wait 'till she's done! It's really nice to have the extra space in the tent now too. It was getting a little cramped. Day 105 - Cheese is doing well in the drying tent. Stems aren't snapping quite yet, so will need a day or two more. Drying chamber is working great. No smell whatsoever. Super Lemon Haze is STILL GOING and looking good. Done with nutes now and watching trichs everyday. Buds are beefing up. The leaves are starting to fade, but the look and colour of the flowers is wild. Can't wait for it to finish up. Should be sometime in the next week or so. Will post a final harvest for the cheese soon! Thanks for stopping by! 🥦
Likes
Comments
Share
She is in the cruise mode. Growing beautiful but small frosty flowers.
Likes
56
Share
Granddaddy plant in week 6 of flowering. She is in full bloom. Bugs Issue: There are some old caterpillar holes on leaves but I think bugs situation improved. The smell from plant dropped last week after first round of insecticide spray. Smell is like plant crying out in pain after being attack by bugs. I sprayed spinetoram one more time in the beginning of the week. Late in the week, I used a USB microscope to check. And there was a Protoss tank patrolling a leaf on plant 2. On the bigger plant, I just saw carcass of dead mites strewn around. Prepping plant 2 for an early harvest. I am always happy on harvest day. Trim her and let the pot dry out for a couple of days. And plan to spray my garden with third and last round of spinetoram. Next week, I am going back to microbes. Plant 1 is doing fine. She is bigger and handles pests better. Her flowering cola’s also smell nicer. Plant 1 phenotypes is much better than plant 2. And I removed some leaves. This past week, I fed both plants with half strength potassium based orchid fertilizer. Plant 2 shows slight tip burn. So, this is the feeding limit. Plant 1 leaves are nice and green. A few leave started to yellow but I am not bothered by that issue at late flowering stage. Next week I’ll just give plant 1 a dose of yogurt and start pre-harvest preparations. Trimming, flushing, and all that. Transplanted a clone to 25-liters basket. She started to put our pistil. This is one issue with Mycorrhiza. It over stimulate the root. And root tips put our too much cytokinin that signals flowering.